== Project Description ==
The Fedora-ARM koji system uese HongKongIRAQ,an x86_64 system, as the Koji hub.
The Fedora-ARM project to use ARM system as the Koji hub(this is called "Eating own dogfood" in the industry)
== Project Details ==
'''First stage'''
* '''Koji Authentication Selection'''
Setting Up a Koji primarily supports Kerberos and SSL Certificate authentication. For basic koji command line access, plain user/pass combinations are possible. However, kojiweb does not support plain user/pass authentication. Furthermore, once either Kerberos or SSL Certificate authentication is enabled so that kojiweb will work, the plain user/pass method will stop working entirely. As such plain user/pass authentication is a stop gap measure at best unless you intend to never setup a fully functional kojiweb instance.Build System
The Kerberos credentials of the initial admin user will be necessary Koji components may live on separate resources as long as all resources are able to bootstrap the user databasecommunicate.To understand koji configuration is an important in project.
For SSL authentication, SSL certificates for the xmlrpc server, for the various koji components, and one for the admin user will need to be setup'''KOJI Configuration'''
1.[http://fedoraproject.org/wiki/Koji/ServerHowTo#Koji_Authentication_Selection Setting up * SSL Certificates for and authentication]via certificates* Creating a database in PostgreSQL and importing a schema* Working with psql* Apache configuration* Koji web and Koji hub
2.[http://fedoraproject.org/wiki/Koji/ServerHowTo#Setting_up_Kerberos_for_authentication Setting up Kerberos for authentication]
So,Release 0.1 results here [http://ycshon.blogspot.com/2010/11/sbr-600-project-release-01.html in my blog]
'''Second stagePackages'''
* Koji DatabaseOn the server (koji-hub/koji-web)
* httpd* mod_ssl* postgresql-server* mod_python (>= 3.3.1.Create Databasefor Kerberos authentication)
yum install postgresqlOn the builder (koji-serverbuilder)
2. Once installed you will then need to initialize the Database with the following command:* mock* rpm-build* createrepo
service postgresql initdbOn the yum repository creation and maintenance (kojira)
3.Start On the Postgresql service with:Bootrapping the Koji build environment
service postgresql start* Importing packages and preparing Koji to run builds* External Repos and preparing Koji to run builds
4. At this point the Postgresql server is installed and operational provided no errors were reported with the database initialized.== Project Plan ==
The next steps is to create a user named “koji”, set up Postgresql and populate the schemaGoals for each release:
useradd koji passwd '''release 0.1 -d koji su - postgres createuser koji Shall the new role be a superuser? (y/n) n Shall the new role be allowed to create databases? (y/n) n Shall the new role be allowed to create more new roles?(y/n) nKoji Certificates '''
createdb -O koji koji logout su - koji psql koji koji < /usr/share/doc/koji*/docs/schema.sql exit'''setting up SSL Certificates for Authentication'''
So,Release 0.2-1 results here [http://ycshon.blogspot.com/2010/11* Certificate generation* Generate CA* Generate the koji component certificates and the admin certificate* Copy certificates into ~/sbr-600-project-release-02-1.html in my blog]koji for kojiadmin
* Koji Hub Configuration
1. introduction
It was agreed that all parts of our Koji build system would reside on IRAQ'''release 0.2 - PostgreSQL and koji hub'''
After successfully installing and configuring Postgresql the next step is the Koji Hub'''release 0.2-1'''
In order for the Koji Hub to work Apache should be installed as well as a few additional modules'''1.PostgreSQL Server'''
Run the following command as root:* Install PostgreSQL* Initialize PostgreSQL DB* Setup User Accounts* Setup PostgreSQL and populate schema* Authorize Koji-web and Koji-hub resources* Make auth changes live* SSL Certificate authentication* Give yourself admin permissions
yum install koji-hub httpd mod_ssl mod_python
'''release 0.2. Edit the Apache conf file-2'''
~/etc/httpd/conf/httpd.conf and change the “MaxRequestsPerChild” to 100'''2.Koji hub'''
On IRAQ these setting were already in place as Apache was running and configured.* Install koji-hub* Required Configuration* Optional Configuration* SELinux Configuration* Koji filesystem skeleton
Next edit the ‘/etc/koji-hub/hub.conf’ file and add the following lines:
DBName = koji
DBUser = koji
DBHost = localhost
KojiDir = /mnt/koji
LoginCreatesUser = On
KojiWebURL = http://iraq.proximity.on.ca/koji
* 0.3 - '''Koji Web'''
'''release 0.3. Using SSL for authentication-1'''
Add this line'''1.kojiweb '''
DNUsernameComponent = CN* Install Koji-Web ProxyDNs = "/C=CA/ST=Ontario/O=Seneca CDOT/OU=/CN=kojiweb/emailAddress="* Required Configuration* Optional Configuration
And in the /etc/httpd/conf'''2.d/kojihub.conf uncomment the following lines:Koji Builder'''
<Location /kojihub>* Install kojid SSLOptions +StdEnvVars* Required Configuration </Location>* Optional Configuration (SSL certificates)* Add the host entry for the koji builder to the database* Add the host to the createrepo channel* A note on capacity* Start Kojid
4'''3.Using [http://zenit.senecac.on.ca/wiki/index.php/Fedora_Arm_Secondary_Architecture/Koji_Certificates the Koji certificates]kojira'''
,and add * Install kojira* Required Configuration* Optional Configuration* Add the following lines to ‘/etc/httpd/conf.d/ssl.conf’, under user entry for the section ‘VirtualHost _default_:443′:kojira user* Start Kojira
SSLCertificateFile /etc/pki/koji/certs/kojihub.crt
SSLCertificateKeyFile /etc/pki/koji/certs/kojihub.key
SSLCertificateChainFile /etc/pki/koji/koji_ca_cert.crt
SSLCACertificateFile /etc/pki/koji/koji_ca_cert.crt
SSLVerifyClient require
SSLVerifyDepth 10
5'''release 0. SE LinuxIn the IRAQ. In order to allow Apache to connect to the Postgresql database run the following command as root:3-2'''
setsebool -P httpd_can_network_connect_db 1'''2. Test kojiweb'''
6.A skeleton filesystem* User account* Build packages
To allow Koji to work, a skeleton filesystem needs to be created and the ownership
changed so Apache can write to it as required. The following commands were executed:
mkdir -p /mnt/koji/{packages,repos,work,scratch}
chown -R apache.apache /mnt/koji
Then edited the '/etc/koji.conf' file and changed the following lines:
;url of XMLRPC server
server = http://iraq.proximity.on.ca/kojihub
;url of web interface
weburl = http://iraq.proximity.on.ca/koji
;url of package download site
pkgurl = http://iraq.proximity.on.ca/packages
;path to the koji top directory
topdir = /mnt/koji
;configuration for SSL athentication
;client certificate
cert = ~/.koji/client.crt
;certificate of the CA that issued the client certificate
ca = ~/.koji/clientca.crt
;certificate of the CA that issued the HTTP server certificate
serverca = ~/.koji/serverca.crt
7. Build accounts
The final step is the addition of the user and builder accounts.
First add the kojira account and grant repo privileges with the following command( this should be done before running kojira for the first time) :
su - kojiadmin
koji add-user kojira
koji grant-permission repo kojira
Then add as many builders as required using the following commands editing where required (this should also be done prior to running kojid on each host):
koji add-host arm-001-001 arm
koji add-host arm-001-002 arm
koji add-host arm-001-003 arm
So,Release 0.2-2 results here [http://ycshon.blogspot.com/2010/11/sbr-600-project-release-02-2.html in my blog]
'''Last stage'''
Koji Web
== Project Plan ==
Goals for each release:
* 0.1 - '''Koji Certificates '''
Koji Hub setup - Certificates/security
* 0.2 - '''Koji Hub setup and Koji Database'''
Koji Hub Setup- Configuration
To setup PostgreSQL for use with Koji
* 0.3 - '''Koji Web'''
Build software to koji hub
== Project News ==
19,November I set up Koji Database.
26,November I set Setting up Postgresql server for Koji hub Configurationpart 1
6,Dec Setting up Postgresql server for Koji part two
16,Dev setting up Koji hub and Koji web,
== Resources ==
[http://fedoraproject.org/wiki/Koji/ServerHowTo#PostgreSQL_Server PostgreSQL_Server]
[http://fedoraproject.org/wiki/Koji/ServerBootstrap importing packages and preparing Koji to run builds]
[http://fedoraproject.org/wiki/Koji/ExternalRepoServerBootstrap External Repos and preparing Koji to run builds]