1
edit
Changes
no edit summary
The goal of this project was to successfully run Fedora 12 on the SheevaPlug. The operating system that came loaded on the device is Debian. The purpose behind installing Fedora 12 on this device is to test the operating system's performance on the ARM architecture.
= Challenges =
2. The plug does not have a BIOS, instead it has a bootloader (U-boot) however this needed to be updated.
3. No Video video card (serial console to USB) instead.
4. Some network configuration had to be made when plugged into my network. This network configuration was required in order to download "wget".
1. In order to run Fedora 12 on the SheevaPlug I had to install the operating system on an SD card (although it can also be installed on a USB drive).
2. Since there is no BIOS to select which device gets booted, The bootloader was easily upgradable by accessing the SheevaPlug has newer version via TFTP or USB from a bootloader called Uweb source (http://www.cyrius.com/debian/kirkwood/sheevaplug/uboot-bootupgrade. html)
3. Since the SheevaPlug doesn't have a display adapter, it comes integrated with a built in "serial console to mini USB" connection. The bootloader was easily upgradable by accessing connection can be made to either a Windows or Linux machine. For the newer version via TFTP or USB from purpose of this project, I connected it to a web source (http://wwwWindows machine. 4.cyriusThe default gateway had was configured and the name server was added to the resolv.com/debian/kirkwood/sheevaplug/uboot-upgradeconf file.html)
= Results =
1. Fedora 12 was successfully installed on an SD card and booted from the SheevaPlug. The boot up time was quick as well, with minimal extra configuration required once booted it up (i.e. networking).
2. Following the HOW-TO page for upgrading U-boot (located in the Links section) was pretty simple, however making sure the uboot.bin file copies over to the USB drive is important for the device to actually read it and copy it over. To configure U-boot, about 7 configuration commands were required, as soon as this was done and the device rebooted, the device selected the SD card and booted Fedora 12. 3. Once I connected the SheevaPlug with the "mini USB to regular USB" cable, I installed the Windows drivers that came with the CD and using PuTTy I used a serial connection to COM 1 using 115200 as the connection speed in order to connect to the device. 4. Configuring the name server enabled the connection to the Internet and I was able to use apt-get to install "wget". Wget was required to download the Distro and the Kernel for when I had to install Fedora 12 on the SD card.
= Acknowledgements =
