Changes

Jump to: navigation, search

OPS335 Lab 4

5,917 bytes added, 4 January
Sending a Mail Message from your vm2 Machine to your Seneca Email Account
[[Category:OPS335]][[Category:OPS335 Labs]]
==MAIL SERVER RESOURCESOVERVIEW & PREPARATION==
{{Admon/important|Warning|Your lab 3 must be complete with a functioning DNS server for your domain before this lab will work.}}
Online References:You may not be aware of it as an user, but email is a very <u>complex</u> system to administer. In fact, the more modern e-mail systems (eg. web-based mail applications, etc) are more technically involved than the other archaic, hard-to-configure, and sometimes inter-operable mail systems.
* [https://preziWe are going to spread the remaining email labs over a few weeks, so that by the end of this topic, you will have a sufficient understanding of what services are involved in sending, filtering, and reading email.com/iuk-advzak_o/mail-servers-postfix/ OPS335 Mail Server Notes ] Course Note providing Concepts and Overview of You will also have the skills to configure a basic mail server setup* [http://www.fredshackusing the default services provided for your Centos7 Linux distribution.com/docs/postfix.html Postfix for Dummies] Good Basic Guide to setup Postfix MTA
Believe it or not, this is a simple diagram of you sending an email to someone else:
==OVERVIEW &amp; PREPARATION==This lab will show you how to set up a '''Postfix''' email server ('''MTA''') on your '''VM2''' machine to send an e[[Image:Email-mail message to an '''external e-mail server (i.e. myseneca.ca)'''. You will also be setting up on your '''VM2'''machine the '''mailx''' package ('''MUA''') to allow users of that VM to send a text-based e-mail to your Seneca mail account (only send, but not receive), and to send and receive e-mails locally on your VM2 machineservers.png]]
In order This lab will show you how to set up a Mail User Agent ('''MUA'''), using the '''mailx''' package on your '''vm2''' machine to send and receive e-mail messages mails on your local VM. In this case, the '''Postfix'''between package which represents your different VMs'''MTA''' is most likely already installed and running on your local VM. In addition to sending and receiving emails on your Local VM, you will also be able to send a more complex settext-based e-up is requiredmail from your '''vm2 machine''' to your '''Seneca mail account'''. You will also learn how to make multiple MTAs in the same network collaborate in sending emails. In addition, and you will be addressed in learn where the second part of lab4message store (MS) is located that stores mail messages until they are viewed and either deleted or transferred to other folders.
The '''diagram''' below shows Although, you will not be able to receive mail messages from outside sources (such as your Seneca email account), this lab acts as a starting point in order to run a basic email server. You are NOT required to go into tremendous depth (just the layout minimum requirements). For example, we will not go over every aspect of the Postfix MTA service, but you should know what it represents and what this lab should be able is its main purpose, as opposed to accomplishthe following:[https://en.wikipedia.org/wiki/Postfix_%28software%29#Architecture complex diagram 1] , [https://www.credativ.de/blog/postfix-architecture-overview complex diagram 2].
===Online References:===
* [http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/ Mail Send Command] (examples how to send e-mail using mail command)* [Imagehttp:email//www.johnkerl.org/doc/mail-setuphow-simpleto.html#prompt_commands View and Manage Received e-mail Mesages] (Common commands to view and manage received email messages)* [https://support.google.pngcom/mail/answer/29436?hl=en Reading Full Email Headers](Explanation of message header information)* [http://wiki.dovecot.org/MailServerOverview Here's an overview](common mail server terms)
==INVESTIGATION 1: INSTALL, SET-UP, AND USE THE MAIL USER AGENT ('''MUA''')==
==INVESTIGATION 1: INSTALL &amp; SETUP THE MAIL TRANSFER AGENT We will be using a simple text-based '''Mail User Agent (MUA)''' called '''mailx''' in this lab to '''both send and receive''' mail messages within your '''vm2''' machine and to '''only send''' mail messages from your '''MTAvm2''')==machine to your Seneca e-mail account.
{{Admon/important|Prerequistites|<ol><li>Ensure <u>all</u> machines have been updated and that the '''clocks NOTE:''' Because you're using private IP addresses and no external DNS servers are set pointing to the correct date and timeyour network, you '''.<bru>cannot</liu><li>Due ''' send e-mail messages from outside your environment to the changes made in this lab3, your '''you will now need your vm1 running (as the DNS server)vm2''' in order for any of your virtual machines to be able to use the internetmachine.</li></ol>}}
=== Confirm Network Connections Installing the Mail User Agent (MUA)===
Before proceeding with this lab, we need to confirm our machines have connectivity to '''Perform the Internet before we can install and start sending e-mail messages.following Steps:'''
#Make certain you are in your '''Perform vm2''' machine.#Install the following steps'''mailx''' application (MUA) using yum:'''NOTE:''' You can refer to the link below to acquaint yourself on how to send e-mail messages using '''mailx''' application:<br> [http://www.simplehelp.net/2008/12/01/how-to-send-email-from-the-linux-command-line/ Mail Send Command Examples]
#Make certain that you can connect to the Internet on ===Sending a Mail Message from your '''Host vm2 Machine''' via web-browser.<br> Since your host should be using '''VM1''' as its '''DNS server''', you will need to make certain that the '''VM1''' machine is running as well.#Start a web-browser on your '''Host Machine''', and access your Seneca e-mail account (https://myseneca.ca).#Confirm that you can access the web from your '''VM2''' machine. You can install the '''wget''' or '''lynx''' applications in order to test this for your text-based server.Email Account===
===Install {{Admon/important|Note|These instructions no longer work reliably. You can still send email to your own email server, and Configure Postfix Package (MTA) on look at the server logs to see that it did really get sent. But it probably won't be accepted for one of a VM===multitude of good reasons. If it doesn't work for you: don't worry about it for lab submission purposes.}}
We will now be installing the '''postfix application''' which will act as the Mail Transfer Agent ('''test to see if your MTA''') that will send e-mail for your vm2 machine is correctly running by sending email messages from your vm2 machine to other your Seneca e-mail servers.<br>In our case, between our servers '''vm2''' and an outside server which is your '''Seneca College''' email account (https://myseneca.ca).
'''Perform the following steps:'''
#Switch to Make certain you are still in your '''VM2vm2''' machine.#Check the status of the Test email from your machine by sending an email to your '''sendmailSeneca email account''' service by using the '''systemctl''' command. If the sendmail service is running, use the ''systemctl'' command to stop and disable that service. #Issue the following command to install the '''postfix''' application (MTA):<br>'''yum install postfix'''<br><br>#What is the purpose of installing the postfix application in terms of using email -mail? Record your answer in your lab logbook.#We need to <u>configure</u> our MTA (postfix application) to recognize our recentlys "Lab4a -created domain name that was created in lab3.test1" <brYour Seneca email address>Edit the Postfix configuration file called '''/etc/postfix/main.cf''' replacing the existing contents with only the contents displayed below:<br><br>'''mydomain = senecaID.orgNOTE:'''<br>after you type in the body of the mail message, move to an empty line, and then press the key combination '''myorigin = $mydomain&lt;ctrl&gt;&lt;d&gt;'''<br>'''mynetworks = 127.0.0to send the message.0/8, 192.168.X.0/24'''<br>'''relay_domains ='''<br>'''inet_interfaces=all'''#Check your Seneca email account (Inbox / Junk Email Folder) to see if you got the email (note that it may take a <bru>few minutes to arrive<br/u>Your MTA has the ability to resolve "fake" public address , so you may also wish to try an actual user alternate email account name. For example, if you have a user account called "msaul"one like gmail, etc). When you can have the MTA resolve the fake name "murray.saul" to the account name "msaul". In order to do thisreceive that email, you will need to create an '''alias''' which is contained in make a note of the MTA's alias filereturn address.<br><br>#Edit If you did not receive the mail, check the '''/etc/postfix/aliases''' file and add mail logs on your first name as an alias vm2 machine to be resolved to your VM2's account name:<br><br>'''your-first-name''' &nbsp; &nbsp; &nbsp; '''your-vm2-regular-username'''<br><br>determine any errors messages that would indicate a mail server setup problem.#In order Once you have succeeded in sending the first email, send a second email to update the MTA's database for the newly-create alias, issue same destination using the following command:<br>'''postalias hash:/etc/aliases'''mail -r "someone@hacker.com (Canadian Revenue Agency)" -s "Lab4a - test2" <br><brYour Seneca email address>#Finally, Check your email to start and enable your MTAsee if you got the email. If you did, issue make a note of the following commands:<br>'''systemctl start postfixreturn address.service'''<br>'''systemctl enable postfix.service'''<br><br>#Check How would you think that including the '''/var/log/messages-r''' file option could be used by penetration hackers to see that your MTA server started without error. If there are any errors, correct them before continuing.gain access to a computer system? What sort of steps do you think should be taken to help prevent this type of attack from happening?
===Sending a Mail Message within your vm2 Machine===
We will now test both your MUA (mailx) and MTA (postfix) by sending and receiving e-mail messages on the local vm2 machine only. '''Record steps, commands, and your observations in INVESTIGATION 1 in your OPS335 lab log-bookPerform the following Steps:'''
#Send an email message locally (i.e. only within your vm2 machine) by issuing the command:<br>'''mail -s "Lab4a - Local - Test1" <yourSenecaID>'''
#After you type in the body of the mail message, move to an empty line, type period "." and press the ENTER key to send the message.
#Login with your '''regular user''' and issue the following command to read the mail message you send to yourself:<br>'''mail'''<br><br>'''NOTE:''' You can refer to the link below to view a reference chart on how to read and delete received e-mail messages at the mail command prompt:<br>[http://www.johnkerl.org/doc/mail-how-to.html#prompt_commands Commands to View and Manage Received e-mail Mesages]<br><br>
#Issue the following command: '''cat /var/spool/mail/<yourSenecaID>'''<br>What do you see? What does this show you in terms of where mail is stored on your e-mail server?
#If you received an e-mail message, the message and subject line should appear as a listing in your mail command.<br><br>'''NOTE:''' If you did not receive a mail message, check your mail server settings, check to see if your mail server is running and also check '''/var/log/maillog''' and '''/var/log/messages''' (this step requires '''root''' privilege).<br><br>
#Once you have received the message, type the mail message number that is displayed in your e-mail message list in the prompt and press ENTER. You should be able to confirm the message body that you sent.
#Exit the mail program by typing the letter '''q''' and press ENTER.
#Re-issue the '''mail''' command. What happened? Issue the command: '''cat /var/spool/mail/<yourSenecaID>'''. What do you notice?
#Exit the mail command.
==INVESTIGATION 2: INSTALL &amp; SETUP THE MAIL USER AGENT ('''MUARecord steps, commands, and your observations in INVESTIGATION 1 in your OPS335 lab log-book''')==
We will be using a simple text-based Mail User Agent ==INVESTIGATION 2: SETUP MTA TO SEND MAIL MESSAGES ('''MUA'''NO ENCRYPTION) called '''mailx''' in this lab to '''send and receive mail messages within your VM1 machine''' and to '''send mail messages to your Seneca e-mail account'''.==
We will be using the '''NOTE:Postfix''' Due to application as the simplicity of this mail server setup'''MTA''', and we will be setting it up on your '''vm2''' and '''vm3''' machines. They will act as the setup "sending" email servers for your internal network. You will be able to send email out of Seneca College's mail serveryour network, and receive email from within your network, but you will '''<u>cannotnot</u>''' send Seneca receive email from outside of your network due to the following reasons:* Individuals outside of your domain will never find the MX records because there are no other DNS servers pointing to your DNS server (i.e-mail messages to . you haven't paid for it).* Even if the individuals could read your MX records, your local network is using IP addresses on a '''VM2private subnet''' machine, which is not routeable on the Internet, so it cannot be reached from outside of your system.
=== Installing Verify the Mail User Agent (MUA)Postfix Service Status ===
'''Perform the following Stepssteps:'''
#Make certain you are in your The '''postfix'vm2''application should be installed by default. If it isn' machinet, install it.#Postfix is capable of sending email with the default configuration, so start and enable this service, and verify that the postfix service is running.#Issue Look for the running postfix service in the list of listening ports by issuing the following command to install the '''mailx''' application (MUA):<br>'''yum install mailx'''<brsource>ss -atnp<br/source>:'''NOTE:''' You can refer to #Which service is postfix running? Locate the port used by SMTP, and look for connections with the link below to acquaint yourself on how to send state LISTEN (i.e-mail messages using '''mailx''' application:<br> [http://www.simplehelpcurrently listening).#Write your observations in your lab logbook.net/2008/12/01/how-to-send-email-from-the-linux-command-line/ Mail Send Command Examples]
===Testing mail with the internetconnection to the Postfix Service ===
We will now be demonstrating the use of the '''nc''' application to test to see if your MTA for your VM2 machine that the postfix service is correctly running by sending email messages from your VM2 machine to your Seneca e-mail accountand listening.
'''Perform the following steps:'''
#Make certain you are still in your If the '''vm2nc''' machine.#Test email from command is not installed on your vm2 machine by sending an email to your , install it (install '''Seneca email accountnc''' using the following command:<br>for your '''mail -s "Lab4a - test1" <Your Seneca email address>vm3'''<br><br>as well).# Connect from your '''NOTE:vm2''' after you type in the body of the mail message, move to an empty line, type period "." and press itself using the ENTER key to send '''nc''' command by issuing the message.following command:<br><brsource >nc localhost 25</source>#Check your Seneca email account to You should see if you got the email (note that it may take a response: <ubr>few minutes to arrive<source >220 vm2.yourdomain.ops ESMTP Postfix</usource>, so you may also wish # You could theoretically use SMTP commands to try send an alternate email account if you have one like gmailhere, etc). When you do receive that email, make but this would be a note very unusual use of the return address.#If you did not receive the mail, check the mail logs on your vm2 machine to determine any errors messages that would indicate a mail server setup problem.#Test email from your You have an '''Host MachineMUA''' by sending an email to your Seneca account using for a reason.#Enter the following command:<br>'''mail -s "Lab4a - test2" -r hacker@evil.com <Your Seneca email address>#Check your Seneca email QUIT''' to see if you got close the email. If you did make a note of the return address. Why would you think including connection to the server, then '''<ctrl>-rc''' option could be used by penetration hackers to gain access to a computer system?terminate the nc command.
===Testing email on Local VM Machine (vm2)===::'''NOTE:''' If it worked, this indicates that the postfix service is running, listening, and responding to connections.
We will now test both <ol><li value="4">Let's see if it works from other machines. Use '''nc''' to connect to '''vm2''' from '''vm3''' and see if it works. If your MUA firewall is set up properly, the nc command should not permit a connection (mailxi.e. ''no route to host'') and MTA .</li><li>Create an iptables rule to allow incoming connections to your '''SMTP''' server on your '''vm2'''.</li><li>Once you open the port in the firewall, retry the '''nc''' command. You should get a different error this time (postfixe.g. ''connection refused'') by sending and receiving e-mail messages . This time the problem is that your service isn't listening on the local VM2 machine outside interface, it's currently configured to listen onlyon the loopback (lo) interface.</li><li>Make sure the new iptables rule gets saved so that it will be loaded automatically from startup.</li></ol>
'''Perform the following Steps:'''=== Listening on all interfaces ===
#Send an email message locally We need to configure the MTA not only to listen to connections from other (i.e. only withinseparate) your VM2 machine by issuing the command:<br>'''mail -s "Lab4a - Local - Test1" <yourSenecaID>'''#After you type in the body of the mail messageMTAs, move but to an empty line, type period "." set the domain name and press the ENTER key server name in order to send the message.#Issue allow the following command user to read issue emails in the mail message you send to yourself:<br>'''mail'''<br><br>'''NOTE:''' You can refer to the link below to view a reference chart on how to read "standard way", and delete received e-allow mail messages at the mail command prompt:<br>[http://www.johnkerl.org/doc/mail-how-to.html#prompt_commands Commands to View and Manage Received e-mail Mesages]<br><br>#If you received an e-mail message, the message and subject line should appear as provide a listing in your mail command.<br>If you did not receive a mail message, check your mail server settings, check to see if you mail server is running and also check '''/var/log/messages'''.#Type the mail message number that is displayed in your e-mail message list in the prompt and press ENTER. You should be able to confirm the message body that you sent.#Exit the mail program by typing the letter '''q''' and press ENTER.#Re-issue the mail command. What happened? If the mail message that you read no longer shows is displayed, what would be the reason correct email address for this?<br>Record your answer in your OPS335 lab log-bookreplies.
'''Perform the following steps:'''
# In your '''vm2''' machine, launch in editing session for the postfix configuration file called: '''/etc/postfix/main.cf'''# Our first editing change to the Postfix configuration will be to make the service "listen" for incoming connections on the external interface (i.e '''eth0''' from the VMs point of view).<br>Change the value of the following parameter to what is displayed below:<br><source>inet_interfaces =all</source># We should also set the string that will end up in the '''From:''' header in messages sent by this server.<br>Change the '''mydomain''' option to YOUR domain name (shown below):<source>mydomain =yoursenecaid.ops</source># Also you must set the '''hostname''' for this server so that will correctly specify the hostname in the '''From:''' header in a sent mail message.<br>Make certain the following parameter only appears once (shown below):<source>myorigin =$myhostname</source>#Ensure that your '''hostname''' and '''DOMAIN''' name is properly set on your machine, otherwise you will need to set the '''myhostname''' parameter.<br>{{Admon/important|Warning|Make sure there are no other un-commented copies of those above-mentioned parameters in the Postfix configuration file.}}<br><ol><li value="6">Restart the postfix service, then use the '''ss''' command to confirm that the your MTA is now listening on <u>all</u> interfaces (not just loopback)</li><li>Test email by connecting to it (using host names===the '''nc''' command) from your '''vm3''' machine.</li></ol>
Let's complete this ''Record steps, commands, and your observations in INVESTIGATION 2 in your OPS335 lab by sending email messages using our recentlylog-created domain name:book'''
'''Perform the following Steps==INVESTIGATION 3:'''SENDING EMAIL BETWEEN MTAs for vm2 and vm3 (NO ENCRYPTION)==
#Use the Your '''hostvm2''' and '''hostname''' commands to confirm that each server should now be capable of your machines has the same ''hostname'' and that the DNS service verifies this to be true.#Restart your MTA (postfix) server if you changed the hostname on either mail server.#Try sending mail to yourself on both machines. For example, as the username <senecaID> on VM 3, use the command:<br>'''mail <senecaID>@vm2.<yourdomain>.org'''<br><br>and '''NOTE:receiving''' the machine will prompt for a subject: enter "testing" without the quotes.<br><br>#Enter the body of your e-mail message. When you have completed entering your email message, enter a period (.) in column 1 on the last line of your letter. This will send the signal: '''end-of-filebut we can''' and your letter will t be mailedcertain until we test it. You should end up back at This also would not help the shell prompt. If you make a mistake, use '''CTRL-C''' to cancel users on the email (DO <u>NOT</u> USE CTRL-Z).#Use the '''mailq''' command on both other machines (you will need to be root) to view in the mail queue. Why would this command be useful for an administrator?#Use the mail command to check to see if you have received any mailnetwork, which are still not capable of receiving email.
'''Record Perform the following steps, commands, and your observations in INVESTIGATION 2 in your OPS335 lab log-book:'''
# Repeat the configuration from investigation 2 on '''vm3''' (swap vm2 and vm3 when issuing command so that you are configuring vm3, and using your vm2 server to test the connections).
# Once that is complete, send an email from '''root on vm2''' to '''root on vm3''', and then reply '''from vm3 to vm2'''.
# If both messages arrive, both MTAs are working. If not, use the troubleshooting tools and techniques you have already learned to diagnose and fix the problem.<br><br>
{{Admon/important |Backup your VMs!|You MUST perform a '''full backup''' of ALL of your VMs whenever you complete your '''OPS335 labs''' or when working on your '''OPS335 assignments'''. You should be using the dump or rsync command, and you should use the Bash shell script that you were adviced to create in order to backup all of your VMs.}}
<br>
'''Record steps, commands, and your observations in INVESTIGATION 3 in your OPS335 lab log-book'''
==COMPLETING THE LAB==
Upon completion of this lab you should have postfix mail servers running on two machines, and starting automatically when they do. These servers must have sent email both ways between each other (from VM 2 to VM 3, and from VM 3 to VM 2), and to your seneca email (or other external mail server).
Upon completion of this lab you should have postfix mail servers running on two machines, and starting automatically when they do. These servers must have sent email both ways between each other (from vm2 to vm3, and from vm3 to vm2), and to your seneca email (or other external mail server).
 
===Online Submission===
Follow the instructions for lab 4a on blackboard.
<!--
===Andrew's sections===
 
You may choose to:
* Submit screenshots of your work on Blackboard, in which case you don't need to come to the lab.
* Or come to the lab, show me your work, and talk to me about it. I want to hear what you've learned and answer any questions you have.
 
You'll get the same grade regardless of how you choose to submit your work.
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Arrange proof that you can send e-mail from your '''vm2''' machine to your '''Seneca College e-mail account''', and than you can '''send and receive e-mail messages between on your vm2 and vm3 machines'''.
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Download and run '''https://ict.senecacollege.ca/~andrew.smith/ops335/labcheck4a.bash''' on your '''host''' machine.
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Completed Lab4a log-book notes.
-->
==EXPLORATION QUESTIONS==
#What did changing Briefly list the steps to install the relay_domains parameter do?MUA on your server for text-based messaging.#What firewall rule or rules, Briefly list the steps to trouble-shoot your server if any, did you have could not send e-mail messages from your vm2 machine to an external e-mail server.#Write the command to send an e-mail message from your vm2 to enter so that email between your VMs would work?Seneca College e-mail account.#What is are the commands to issue in the mail prompt to:<ul><li>Read the first e-mail message displayed</li><li>Save the 4th e-mail message to the meaning of file pathname: ~/maildir/3.msg.txt</li><li>Delete the square brackets surrounding 3rd e-mail message displayed</li><li>Exit the IP address in mail command prompt and return to the examples?shell</li></ul>#What were the results of sending email between the VMsemails locally on your vm2 machine? Show log segments to verify your answers.# What is the purpose of an MTA?# What is the purpose of an MUA?# Draw a simple diagram showing how an MUA and an MTA are used to send e-mail messages between different servers.# List the steps to test a running postfix service using the nc application.

Navigation menu