Difference between revisions of "Winter 2010 Posters/ARM Intro"

From CDOT Wiki
Jump to: navigation, search
Line 19: Line 19:
  
 
Fedora supports two primary architectures:
 
Fedora supports two primary architectures:
i386 - 32-bit Intel/AMD-compatible
+
  i386 - 32-bit Intel/AMD-compatible
x86_64 - 64-bit Intel/AMD-compatible
+
  x86_64 - 64-bit Intel/AMD-compatible
  
 
There are also a number of secondary archs:
 
There are also a number of secondary archs:
arm - A widely-used, low-power processor family commonly used for embedded and mobile applications
+
  arm - A widely-used, low-power processor family commonly used for embedded and mobile applications
ia64 – Itanium
+
  ia64 – Itanium
pa-risc - HP Precision Architecture
+
  pa-risc - HP Precision Architecture
ppc - 32-bit Power PC
+
  ppc - 32-bit Power PC
ppc64 - 64-bit Power PC
+
  ppc64 - 64-bit Power PC
s390 - IBM mainframes (including z90 and z9)
+
  s390 - IBM mainframes (including z90 and z9)
sparc - Sun RISC architecture
+
  sparc - Sun RISC architecture
  
 
The ARM architecture is increasingly important, but there's a lot more that could be done in terms of update frequency, number of packages successfully built, transparency of process, and integration with the other Fedora build processes.
 
The ARM architecture is increasingly important, but there's a lot more that could be done in terms of update frequency, number of packages successfully built, transparency of process, and integration with the other Fedora build processes.

Revision as of 09:52, 17 April 2010

Project Name

Fedora/ARM

Name

Arlene Daniel

Fedora

Fedora, an open source operating system using RPM-based, built on top of the Linux kernel. It is developed and maintained by a community-support known as the Fedora Project which is sponsored by Red Hat. The Fedora Project's mission is "To lead the advancement of free and open source software and content as a collaborative commuinty." Fedora's main aim is to be a leader in the use and distrbution on software designed as open source.

The ARM Architecture

ARM chips are the most popular CPU produced -- approximately 1.6 billion are being made each year. These are being sold under a number of different brand names (ARM, StrongARM, Armada, Cortex, OMAP, Sheeva, Snapdragon, XScale) by a number of different manufacturers. Most of these are going into cellphones, but hundreds of millions are being used in other devices such as routers, NAS boxes, embedded controllers, tablets, and netbooks. One Laptop Per Child (OLPC) computers, model XO-1.75, use an ARM processor. Since Fedora is used on the XO units, having a reliable ARM build of Fedora is increasingly important.


Supported Architecture

Fedora supports two primary architectures:

  i386 - 32-bit Intel/AMD-compatible
  x86_64 - 64-bit Intel/AMD-compatible

There are also a number of secondary archs:

 arm - A widely-used, low-power processor family commonly used for embedded and mobile applications
 ia64 – Itanium
 pa-risc - HP Precision Architecture
 ppc - 32-bit Power PC
 ppc64 - 64-bit Power PC
 s390 - IBM mainframes (including z90 and z9)
 sparc - Sun RISC architecture

The ARM architecture is increasingly important, but there's a lot more that could be done in terms of update frequency, number of packages successfully built, transparency of process, and integration with the other Fedora build processes.

Technical Approach

Fedora policy requires that packages be natively compiled. We use a cluster of ARM hardware and QEMU virtual machines to build the packages natively for ARM.

The baseline ARM CPU architecture that we have chosen to support is ARMv5TE, Little Endian, Soft-Float, EABI. We believe that this provides a nice baseline and that the pre-built packages and root file system images. You should be able to use this on many of the modern ARM CPUs, including XScale, ARM926 and ARM-11, etc.

Although we do not provide such binaries, the sources also lend themselves for building for pre-ARMv5TE hardware. The same is true for big-endian CPUs.


Installer and Kernel

We currently do not plan to provide an installer, ISO images, or a kernel. Unlike in the x86 world, different ARM CPU families require different kernel images. Likewise, it is not entirely clear whether it makes sense to provide an installer or ISO images.


Our Objective

We're going to set up a Koji build system for ARM. Initially this will be based on the CDOT system HongKong. Initial ARM builders will use QEMU emulation, which will be replaced by ARM Hardware when it arrives.


Our Goal

To support the Fedora ARM initiative by creating and managing a Koji build farm that will koji-shadow the primary architectures.


Acknowledgements

  • Chris Tyler

Links

Logos

  • Fedora
  • ARM