Tutorial6: File Transfer / Sending Email Messages

From CDOT Wiki
Revision as of 09:54, 28 January 2020 by Msaul (talk | contribs) (INVESTIGATION 2: USING SECURE TRANSMISSION CONTROL PROTOCOL)
Jump to: navigation, search

TRANSFERRING FILES / USING THE MAIL COMMAND


Main Objectives of this Practice Tutorial

  • List common utilities combined with the ssh suite of utilities
  • Securely copy files between Unix/Linux servers using the scp command
  • Securely transfer copies of files between Unix/Linux servers using the sftp command
  • Use the mail command to send email messages to your Seneca email account
  • Use the mail command to send email with file attachments to your Seneca email account


Tutorial Reference Material

Course Notes
Definitions / Commands
YouTube Videos
Course Notes: Definitions: File Transfer Commands: Instructional Videos:

KEY CONCEPTS

The ssh Linux command is actually a suite of tools to allow the user to not only issue commands securely between Unix / Linux servers, but also securely copy and transfer files among Unix/Linux servers via the commands scp and sftp.

In this tutorial, you will learn several different methods to securely transfer files from your Matrix Linux account to other computers
using Linux commands including scp, sftp and mail.

Secure Copy (scp)

The scp Unix/Linux command is used to securely copy files between Unix/Linux servers.

Secure copy protocol (scp) is a means of securely transferring computer files between a local host and a remote host or between two remote hosts. It is based on the Secure Shell (SSH) protocol. "SCP" commonly refers to both the Secure Copy Protocol and the program itself.

Reference: https://en.wikipedia.org/wiki/Secure_copy


The usage for the scp command is similar to the cp command with the addition of host names, for example:

scp local.file user@host:destination-pathname

scp local.file user@host:

scp local.file host:


The most common mistake that students make is forgetting to add the colon character ":" after the remote hostname.

The user name in the command can be omitted if it's the same as on the local host.

Multiple file and recursive directory copy (i.e. option -R) is supported

Secure File Transmission Control Protocol (sftp)

The sftp Unix/Linux command is used to securely transfer (copy) files between Unix/Linux servers.

sftp is a file transfer program, similar to ftp, which performs all operations over an encrypted ssh transport. It may also use many features of ssh, such as public key authentication and compression.

Reference: http://man7.org/linux/man-pages/man1/sftp.1.html

FTP is an acronym for File Transfer Protocol which provides a framework of rules on how to convert data that is transferred between computer servers (both identical and different).


When you login via the sftp command, you are in the sftp prompt (like a Bash shell prompt, but with a limited number of commands). When issuing sftp commands it is important to understand that the local server relates to the server where you first issues the sftp command.

Below is a table that provides sftp commands to perform basic transfer and file management commands. Some of those commands loosely resemble Unix/Linux commands.


Operationsftp Command
(Local Server)
sftp Command
(Remote Server)
Display current working directory!pwdpwd
Display directory contents!lsls
Create Directory!mkdirmkdir
Change directory locationlcdcd
Upload file to remote serverput-
Download file to local serverget-



Sending Emails with File Attachment (mail)

mail is a command-line email client for Unix and Unix-like operating systems.

Reference: https://en.wikipedia.org/wiki/Mail_(Unix)


Steps when sending email (Method 1):

  1. Type: mail recipient@hostname and press ENTER
  2. Enter subject line and press ENTER
  3. Type the body of the message and then when finished, press ctrl+d to send message

    NOTE: You can use the mail command with the -a option to specify a file.

    Example:
    mail recipient@hostname -a filename


Steps when sending email (Method 2):

  1. Use the -s option in the command to specify the subject line of the command and use stdin redirection to send a text file as the body of the message.

    NOTE: The advantage of using this method is that you can send an email message without being prompted for the subject line or body of text message.

    Example:
    mail -s "your subject line" recipient@hostname < filename



INVESTIGATION 1: USING SECURE COPY


In this section, you will learn how to use the scp command.

ATTENTION: Since the only server account you have is your Matrix server,
we will simulate using the scp command to copy from your Matrix server to
another instance of your Matrix server.

To make this work, we will need to edit a "start-up" file to place a special series of commands.
You will learn more about start-up files later in this course.


Perform the Following Steps:

  1. Login your matrix account and issue a command to confirm you are located in your home directory.

  2. Issue the following Linux commands to create the following directories:
    mkdir ~/from
    mkdir ~/destination


  3. Change to the ~/from directory.

  4. Use a text editor to create a text file called myfile.txt

  5. Enter the following two lines displayed below:
    This is my file
    It is a small file


  6. Save editing changes and exit your text editor.

  7. Change back to your home directory and confirm that you are located in your home directory.

    Let's run a shell script to check to make certain that you created the correct directories
    and that you created the myfile.txt file (with correct file contents) in the ~/from directory
    in order to practice using the scp Linux command.

  8. Issue the following Linux command to run a checking script: bash /home/murray.saul/scripts/week6-check-1

  9. If you encounter errors and re-run the checking script until you receive a congratulations message, and proceed to the next step.

    NOTE: As mentioned we will simulate using the scp on another instance of our Matrix server.

    To make this work, we will need to edit a "start-up" file to place a special series of commands

  10. Use a text editor to edit the following start-up file: ~/.bashrc

  11. Enter the following text (shown below) at the TOP of this file:
    $- == *i* || return

  12. Issue the following Linux command to confirm that the ~/destination directory is empty:
    ls ~/destination

  13. Although you are in your Matrix account, issue the following Linux command (i.e. yoursenecaid is YOUR Seneca ID):
    scp myfile.txt yoursenecaid@matrix.senecacollege.ca:/destination

    NOTE: You may be required to enter yes to have the public key shared.

  14. When prompted, enter your Matrix password.

  15. Issue the same Linux command that you issued in step #12.

    What did you notice?

  16. Issue the following Linux command:
    scp myfile.txt yoursenecaid@matrix.senecacollege.ca:

    Where do you think this file was copied to on your remote server?

  17. Issue the ls command for the home directory.

    What do you see?

  18. Issue the following Linux command (leaving-out the colon character at the end):
    scp myfile.txt yoursenecaid@matrix.senecacollege.ca

    What happened?

  19. Make certain that your current directory is your home directory.

  20. Issue the following Linux command to run a checking script to ensure you created the CORRECT directories, created and copied the correct files:
    bash /home/murray.saul/scripts/week6-check-2

  21. If you encounter errors and re-run the checking script until you receive a congratulations message.

In the next investigation, you will use the sftp Linux command to transfer (i.e. copy) files between servers.

INVESTIGATION 2: USING SECURE TRANSMISSION CONTROL PROTOCOL

In this section, you will learn how to use the sftp command to transfer files between Unix/Linux servers and perform some basic directory navigation/management operations.


NOTE: Since the only server account you have is your Matrix server, we will simulate using the sftp command to transfer/copy from your Matrix server to another instance of your Matrix server. You are NOT required to edit your .bashrc file to make this work since you already performed that operation in the previous investigation.


Perform the Following Steps:

  1. Make certain that you are logged into your Matrix account and are located in your home directory.

  2. Issue the following Linux commands to create the following directories:
    mkdir ~/local
    mkdir ~/remote


  3. Change to the ~/local directory.

  4. Use a text editor to create a text file called thefile.txt

  5. Enter the following two lines displayed below:
    This is my file called thefile.txt
    It is also small file


  6. Save editing changes and exit your text editor.

  7. Change back to your home directory and confirm that you are located in your home directory.

    Let's run a shell script to check to make certain that you created the correct directories
    and that you created the myfile.txt file (with correct file contents) in the ~/local directory
    in order to practice using the scp Linux command.

  8. Issue the following Linux command to run a checking script: bash /home/murray.saul/scripts/week6-check-3

  9. Issue the following Linux command (i.e. yoursenecaid is YOUR Seneca ID):
    sftp yoursenecaid@matrix.senecacollege.ca

    NOTE: You may be required to enter yes to have the public key shared.

    You are now in the sftp command prompt where you are expected to issue sftp commands.
    Please refer to the table of sftp commands in the KEY CONCEPTS section for reference.

  10. Issue the following sftp command: pwd

    What is the pathname? Which server does this represent: local or remote?

  11. Issue the following sftp command: !pwd

    What is the pathname? Which server does this represent: local or remote?

  12. Issue the following sftp command to create a directory on your remote server: mkdir destination2

  13. Issue the following command to confirm that the destination2 directory has been created in your remote server's home directory:
    ls

  14. Issue the following command to change to the destination2 directory:
    cd destination2

  15. Issue the pwd command to confirm that you have changed to the destination2 directory on your remote server.

  16. x

In the next investigation, you will learn an alternative way to transfer a file to another computer server by sending an e-mail message with an attached file.

INVESTIGATION 3: USING THE MAIL COMMAND

In this section, you will learn how to ...


Perform the Following Steps:

  1. x

LINUX PRACTICE QUESTIONS

The purpose of this section is to obtain extra practice to help with quizzes, your midterm, and your final exam.

Here is a link to the MS Word Document of ALL of the questions displayed below but with extra room to answer on the document to simulate a quiz:

https://ict.senecacollege.ca/~murray.saul/uli101/uli101_week6_practice.docx

Your instructor may take-up these questions during class. It is up to the student to attend classes in order to obtain the answers to the following questions. Your instructor will NOT provide these answers in any other form (eg. e-mail, etc).


Review Questions:

  1. Write a Linux command to copy a file in the current directory called mytext.txt from your Matrix account to your account called user1 on the Linux server domain name called tech.myserver.com to that user’s home directory.
  2. Write a Linux command similar to the previous question, but rename the file on the remote Linux server to yourtext.txt
  3. Write a Linux command to copy a file called ~/project/linux.txt to the remote server called linux.techie.org
    (your username for this remote server is the same username for your local server).
  4. Write a Linux command to connect to the username saulm for the server domain name tux.senecac.on.ca to transfer files between Linux servers.
  5. Assuming that you are connected to that server in question #4. What is the sftp command to display your current working directory on your local server?
  6. Assuming that you are connected to that server in question #4. What is the sftp command to view files in your local server?
    What is the sftp command to view files in your remote server?
  7. Assuming that you are connected to that server in question #4. What is the sftp command to download the file answers.txt from the current directory of your remote server?
  8. Assuming that you are connected to that server in question #4. What is the sftp command to upload the file questions.txt from your local server to the ~/documents/tests directory on your remote server?
  9. Assuming that you are connected to that server in question #4. What is the sftp command to quit your current session?
  10. Write a Linux command to send the attached file message.txt to the email address murray.saul@senecacollege.ca with the subject line: Important Message
  11. Create a table listing each Linux command, useful options that were mentioned in the online assignment #1 and command purpose for the following Linux commands: scp , sftp , mail.