Difference between revisions of "Tutorial10: Shell Scripting - Part 1"

From CDOT Wiki
Jump to: navigation, search
(INVESTIGATION 4: CONTROL FLOW STATEMENTS)
 
(50 intermediate revisions by the same user not shown)
Line 1: Line 1:
=INTRODUCTION TO SHELL SCRIPTING=
+
=USING SED & AWK UTILTIES=
 
<br>
 
<br>
 
===Main Objectives of this Practice Tutorial===
 
===Main Objectives of this Practice Tutorial===
  
:* Plan and create a Shell Script
+
:* Use the '''sed''' command to '''manipulate text''' contained in a file.
  
:* Explain the purpose of the '''she-bang line''' contained at the top of a shell script.
+
:* List and explain several '''addresses''' and '''instructions''' associated with the '''sed''' command.
  
:* Set '''permissions''' and '''execute''' shell scripts.  
+
:* Use the '''sed''' command as a '''filter''' with Linux pipeline commands.
  
:* Use '''environment''' and '''user-defined''' variables in shell scripts.
+
:* Use the '''awk''' command to '''manipulate text''' contained in a file.
  
:* Use '''Command Substitution''' and '''Math Operations''' in shell scripts
+
:* List and explain '''comparison operators''', '''variables''' and '''actions''' associated with the '''awk''' command.
  
:* Explain the purpose of the '''$?''' exit status and the '''test''' command.
+
:* Use the '''awk''' command as a '''filter''' with Linux pipeline commands.
 
 
:* Use '''if''' and '''if-else''' logic statements in shell scripts.
 
 
 
:* Use a '''for''' loop statement with a list in shell scripts.
 
 
<br><br>
 
<br><br>
  
Line 34: Line 30:
 
|- valign="top" style="padding-left:15px;"
 
|- valign="top" style="padding-left:15px;"
  
|colspan="2" |Course Notes:<ul><li>[https://ict.senecacollege.ca/~murray.saul/uli101/ULI101-Week10.pdf PDF] | [https://ict.senecacollege.ca/~murray.saul/uli101/ULI101-Week10.pptx PPTX]</li></ul>
+
|colspan="2" |'''Slides''':<ul><li>Week 11 Lecture 1 Notes:<br> [[Media:ULI101-Week11.1.pdf | PDF]] | [https://matrix.senecacollege.ca/~chris.johnson/ULI101/ULI101-Week11.1.pptx PPTX]</li><li>Week 11 Lecture 2 Notes:<br> [[Media:ULI101-Week11.2.pdf | PDF]] | [https://matrix.senecacollege.ca/~jason.carman/slides/ULI101-Week11.2.pptx PPTX] <br></li></ul>
  
  
|  style="padding-left:15px;" |Shell Scripting
+
|  style="padding-left:15px;" |'''Text Manipulation:'''
* [https://searchdatacenter.techtarget.com/definition/shell-script Purpose]
+
* [https://www.digitalocean.com/community/tutorials/the-basics-of-using-the-sed-stream-editor-to-manipulate-text-in-linux Purpose of using the sed utility]
 +
* [https://www.digitalocean.com/community/tutorials/how-to-use-the-awk-language-to-manipulate-text-in-linux Purpose of using the awk utility]
  
Variables
+
|  style="padding-left:15px;" |'''Commands:'''
* [https://opensource.com/article/19/8/what-are-environment-variables Environment]
+
* [https://man7.org/linux/man-pages/man1/sed.1p.html sed]
* [https://www.linuxtechi.com/variables-in-shell-scripting/#:~:text=User%20Defined%20Variables%3A,like%20a%20real%20computer%20program. User Defined]
+
* [https://man7.org/linux/man-pages/man1/awk.1p.html awk]
* [http://osr600doc.xinuos.com/en/SDK_tools/_Positional_Parameters.html#:~:text=A%20positional%20parameter%20is%20a,up%20to%20nine%20positional%20parameters. Positional Parameters]
 
Commands / Techniques
 
* [http://linuxcommand.org/lc3_man_pages/readh.html read]
 
* [https://man7.org/linux/man-pages/man1/readonly.1p.html readonly]
 
* [https://www.gnu.org/software/bash/manual/html_node/Command-Substitution.html Command Substitution]
 
|  style="padding-left:15px;"|Control Flow Statements
 
* [https://en.wikipedia.org/wiki/Control_flow Purpose]
 
* [https://www.computerhope.com/unix/test.htm test command]
 
* [https://ryanstutorials.net/bash-scripting-tutorial/bash-if-statements.php#:~:text=If%20statements%20(and%2C%20closely%20related,conditions%20that%20we%20may%20set. if statement]
 
* [https://www.tutorialspoint.com/unix/if-else-statement.htm if-else statement]
 
* [https://www.cyberciti.biz/faq/bash-for-loop/#:~:text=A%20'for%20loop'%20is%20a,files%20using%20a%20for%20loop. for loop]
 
  
|colspan="1" style="padding-left:15px;" width="30%"|Instructional Videos:<ul><li>[https://www.youtube.com/watch?v=kxEP-KUhOSg&list=PLU1b1f-2Oe90TuYfifnWulINjMv_Wr16N&index=5 Bash Shell Scripting - Part 1]</li><li>[https://www.youtube.com/watch?v=cQepf9fY6cE Creating and Running a Shell Script]</li></ul>
+
 
 +
|colspan="1" style="padding-left:15px;" width="30%"|'''Brauer Instructional Videos:'''<ul><li>[https://www.youtube.com/watch?v=npU6S61AIko&list=PLU1b1f-2Oe90TuYfifnWulINjMv_Wr16N&index=14 Using the sed Utility]</li><li>[https://www.youtube.com/watch?v=OV3XzjDYgJo&list=PLU1b1f-2Oe90TuYfifnWulINjMv_Wr16N&index=13 Using the awk Utility]</ul>
 
|}
 
|}
  
 
= KEY CONCEPTS =
 
= KEY CONCEPTS =
<br>
 
A shell script is a '''file''' that contains '''Unix/Linux commands''' and '''reserved words''' to help '''automatic''' common tasks.
 
 
===Creating & Executing Shell Scripts===
 
 
It is recommended to '''plan''' out on a piece of paper the purpose of the shell script.<br>Once you have planned your shell script by listing the '''sequence of steps (commands)''',<br>you need to create a file (using a '''text editor''') that will contain your Linux commands.<br><br>'''NOTE:'''  Avoid using filenames of already existing Linux Commands to avoid confusion.<br>It is recommended to include a file extension that describes the type of shell for the shell script.<br><br>
 
  
'''Using a Shebang Line'''
 
  
[[Image:shebang.png|thumb|right|200px|The '''shebang line''' <u>must</u> appear on the '''first line''' and at the '''beginning''' of the shell script.]]Since Linux shells have evolved over a period of time, using a she-bang line '''forces''' the shell script<br>to run in a '''specific shell''', which could prevent errors in case an older shell does not recognize<br>newer features from more recent shells.<br><br>The '''she-bang''' line is a '''special comment''' at top of your shell script to run your shell script<br>in a specific shell.<br><br>
+
===Using the sed Utility===
'''NOTE:''' The '''shebang line''' <u>must</u> appear on the '''first line''' and at the '''beginning''' of the shell script,<br>otherwise, it will be treated as a regular comment and ignored.<br><br>
 
  
'''Setting Permissions / Running Shell Scripts'''
 
  
To run your shell script by name, you need to assign '''execute permissions''' for the user.<br>To run the shell script, you can '''execute''' the shell script using a ''relative'', ''absolute'', or ''relative-to-home'' pathname
+
'''Usage:'''
  
''Examples:''<br><span style="font-family:courier;">'''chmod u+x myscript.bash<br>./myscript.bash<br>/home/username/myscript.bash<br>~/myscript.bash</span>
+
'''<span style="color:blue;font-weight:bold;font-family:courier;">Syntax:  sed [-n] 'address instruction' filename</span>'''  
'''
 
<br><br>
 
  
===Variables / Parameters===
 
  
 +
'''How it Works:'''
  
'''Environment Variables'''
+
* The sed command reads all lines in the input file and will be exposed to the expression<br>(i.e. area contained within quotes) one line at a time.
 
+
* The expression can be within single quotes or double quotes.
[[Image:environment.png|thumb|right|500px|Examples of using '''Environment''' and '''User Defined''' variables.]]Shell '''environment variables''' shape the working environment whenever you are logged in Common shell. Some of these variables are displayed via Linux commands in the diagram displayed on the right-side.<br><br>You can issue the pipeline command <span style="font-family:courier;font-weight:bold">set | more</span><br>to view all variables.<br><br>Placing a dollar sign "<span style="font-family:courier;font-weight:bold">$</span>" prior to the variable name will cause the variable to expand to the value contained in the variable.
+
* The expression contains an address (match condition) and an instruction (operation).
 
+
* If the line matches the address, then it will perform the instruction.
 
+
* Lines will display be default unless the '''–n''' option is used to suppress default display
'''User Defined Variables'''
 
 
 
<b>User-defined variables</b> are variables that can be used in the shell script for '''customized''' purposes.
 
<br><br>
 
Data can be stored and removed within a variable using an '''equal sign''' (no spaces on either side of equal sign).<br><br>The '''read''' command can be used to prompt the user to enter data into a variable. The '''readonly''' command will prevent<br>the current value of the variable for the remainder of the execution of a shell script.<br><br>
 
 
 
'''Positional Parameters and Special Parameters'''
 
 
 
[[Image:positional.png|thumb|right|220px|Examples of using '''positional''' and '''special''' parameters.]]A '''positional parameter''' is a variable within a shell program; its value is set from arguments contained in a shell script or using the '''set''' command.
 
Positional parameters are numbered and their values are accessed by using<br>a preceding "'''$'''" (eg. '''$1''', '''$2''', '''$3''', etc.). The positional parameter '''$0''' refers to<br>either the '''name of shell''' where command was issued, or '''filename of shell script''' being executed.<br>If using '''positional parameters''' greater than '''9''', then you need to include number within braces.<br><br>Examples: '''echo ${10}''', '''ls ${23}'''<br><br>
 
 
 
The '''shift''' command can be used with positional parameters to shift positional parameters<br>to the left by one or more positions.
 
 
 
There are a couple of ways to assign values as positional parameters:
 
:*Use the '''set''' command with the values as argument after the set command
 
:*Run a shell script containing arguments
 
 
 
 
 
There are a group of '''special parameters''' that can be used for shell scripting.<br>A few of these special parameters and their purpose are displayed below:<br>'''$*''' , '''“$*”''' , '''"$@"''' , '''$#''' , '''$?'''
 
<br><br>
 
 
 
=== Command Substitution / Math Operations ===
 
 
<br>
 
<br>
'''Command Substitution:'''
+
'''Address:'''
  
[[Image:for-command-substitution.png|thumb|right|300px|Example of how a '''for loop with command substitution''' works.]]
+
* Can use a line number, to select a specific line (for example: '''5''')
<i>'''Command substitution''' is a facility that allows a command<br>to be run and its output to be pasted back on the command line as arguments to another command.</i> Reference: https://en.wikipedia.org/wiki/Command_substitution<br><br>
+
* Can specify a range of line numbers (for example: '''5,7''')
 +
* Regular expressions are contained within forward slashes (e.g. /regular-expression/)
 +
* Can specify a regular expression to select all lines that match a pattern  (e.g '''/^[0-9].*[0-9]$/''')
 +
* If NO address is present, the instruction will apply to ALL lines
  
''Usage:''
 
  
<span style="font-family:courier"><b>command1 $(command2)</b><br>or<br><b>command1 `command2`</b></span><br><br>
+
[[Image:sed.png|right|500px|]]
 
+
'''Instruction:'''
''Examples:''
+
*'''Action''' to take for matched line(s)
 
+
*Refer to table on right-side for list of some<br>'''common instructions''' and their purpose
<span style="font-family:courier;font-weight:bold">file $(ls)<br>mail -s "message" $(cat email-list.txt) < message.txt<br>echo "The current directory is $(pwd)"<br>echo "The current hostname is $(hostname)"<br>echo "The date is: $(date +'%A %B %d, %Y')"<br>
 
 
<br><br>
 
<br><br>
'''Math Operations:'''
 
[[Image:math-op.png|thumb|right|275px|Common Math Operator Symbols.]]
 
In order to make math operations work, we need to convert numbers<br>stored as '''text''' into '''binary numbers'''.<br><br>We can do this by using 2 pairs of round brackets '''(( ))'''.<br><br>
 
''Examples:''
 
  
<pre style="width:30%">num1=5;num2=10
+
===Using the awk Utility===
echo “$(($num1 + $num2))”
+
15
 
echo “$((num1-num2))”
 
-5
 
((product=num1*num2))
 
echo “$product”
 
50
 
</pre>
 
<br>
 
  
===Control Flow Statements===
+
'''Usage:'''
<br>
 
<table align="right"><tr valign="top"><td>[[Image:test-1.png|thumb|right|140px|Examples of simple comparisons using the test command.]]</td><td>[[Image:test-2.png|thumb|right|140px|Examples of using additional comparisons using the test command.]]</td></table>
 
'''Control Flow Statements''' are used to make your shell scripts<br>more '''flexible''' and can '''adapt''' to changing situations.<br><br>In order to use control flow statements, you need to test a condition to get<br>'''TRUE''' (zero value) or '''FALSE''' (non zero value). This can be done two ways:<ul><li>Run a command to get the exit status (<span style="font-family:courier;font-weight:bold;">$?</span>)</li><li>Use the '''test''' command</li></ul><br>Refer to the diagrams on the right to see how to use the test command.<br><br>
 
  
You CANNOT use the <span style="font-family:courier;font-weight:bold;">&lt;</span> or <span style="font-family:courier;font-weight:bold;">&gt;</span> symbols when using the test command since these are redirection symbols. Instead, you need to use '''options''' when performing numerical comparisons.
+
<span style="color:blue;font-weight:bold;font-family:courier;">awk [-F] 'selection-criteria {action}’ file-name</span>
Refer to the diagrams to the right '''test options''' and their purposes.
 
<br><br>
 
  
'''Logic Statements'''
 
  
A '''logic statement''' is used to determine which Linux commands<br>are executed basedon the result of a condition:<br>'''TRUE''' (zero value) or '''FALSE''' (non-zero value).
+
'''How It Works:'''
  
[[Image:logic-1.png|thumb|right|210px|Example of using the '''if''' logic control-flow statement.]]
+
* The '''awk''' command reads all lines in the input file and will be exposed to the expression (contained within quotes) for processing.
 +
*The '''expression''' (contained in quotes) represents '''selection criteria''',  and '''action''' to execute contained within braces '''{}'''
 +
* if selection criteria is matched, then action (between braces) is executed.
 +
* The '''–F''' option can be used to specify the default '''field delimiter''' (separator) character<br>eg. '''awk –F”;”'''   (would indicate a semi-colon delimited input file).
 
<br>
 
<br>
There are several logic statements, but we will just concentrate on the if statement.
+
'''Selection Criteria'''
<pre style="width:20%">
 
if test condition
 
  then
 
    command(s)
 
fi
 
</pre>
 
 
 
Refer to the diagram to the right for using the '''if logic statement''' with the '''test''' command.
 
  
<br><br><br><br><br>
+
* You can use a regular expression, enclosed within slashes, as a pattern. For example: '''/pattern/'''
'''if-else statement:'''
+
* The ~ operator tests whether a field or variable matches a regular expression. For example:  '''$1 ~ /^[0-9]/'''
 +
* The '''!~''' operator tests for no match. For example: '''$2 !~ /line/'''
 +
* You can perform both numeric and string comparisons using relational operators ( '''>''' , '''>=''' , '''<''' , '''<=''' , '''==''' , '''!=''' ).
 +
* You can combine any of the patterns using the Boolean operators '''||''' (OR) and '''&&''' (AND).
 +
* You can use built-in variables (like NR or "record number" representing line number) with comparison operators.<br>For example: '''NR >=1 && NR <= 5'''  
 
<br>
 
<br>
[[Image:logic-2.png|thumb|right|210px|Example of how an '''if-else''' control-flow statement.]]
+
'''Action (execution):'''
 
 
Unlike using an ''if'' statement, an '''if-else''' statement take '''two different sets of actions'''<br>based on the results of the test condition.<br><br>
 
  
''Example:''
+
* Action to be executed is contained within braces '''{}'''
 +
* The '''print''' command can be used to display text (fields).
 +
* You can use parameters which represent fields within records (lines) within the expression of the awk utility.
 +
* The parameter '''$0''' represents all of the fields contained in the record (line).
 +
* The parameters '''$1''', '''$2''', '''$3''' … '''$9''' represent the first, second and third  to the 9th fields contained within the record.
 +
* Parameters greater than nine requires the value of the parameter to be placed within braces (for example: '''${10}''','''${11}''','''${12}''', etc.)
 +
* You can use built-in '''variables''' (such as '''NR''' or "record number" representing line number)<br>eg. '''{print NR,$0}'''   (will print record number, then entire record).
  
<pre style="width:20%">
+
=INVESTIGATION 1: USING THE SED UTILITY=
if test condition
 
  then
 
    command(s)
 
  else
 
    command(s)
 
fi
 
</pre>
 
  
 +
<span style="color:red;">'''ATTENTION''': Effective '''May 9, 2022''' - this online tutorial will be required to be completed by '''Friday in week 11 by midnight'''<br>to obtain a grade of '''2%''' towards this course</span><br><br>
  
'''Loop Statements'''
+
In this investigation, you will learn how to manipulate text using the '''sed''' utility.
[[Image:loop-1.png|thumb|right|210px|Example of using the '''for''' looping control-flow statement.]]
 
''A <b>loop statement</b> is a series of steps or sequence of statements executed repeatedly<br>zero or more times satisfying the given condition is satisfied.''<br>Reference: https://www.chegg.com/homework-help/definitions/loop-statement-3
 
 
 
There are several loops, but we will look at the '''for loop''' using a '''list'''.
 
 
 
<pre style="width:20%">
 
for item in list
 
do
 
    command(s)
 
done
 
</pre>
 
 
 
Refer to the diagram above and to the extreme right side for an example using the '''for loop''' with a '''list'''.
 
<br><br>
 
 
 
=INVESTIGATION 1: CREATING A SHELL SCRIPT=
 
 
 
<br>
 
In this section, you will learn how to create and run a '''Bash Shell script'''.
 
  
  
 
'''Perform the Following Steps:'''
 
'''Perform the Following Steps:'''
  
# '''Login''' to your matrix account.<br><br>
+
# '''Login''' to your matrix account and confirm you are located in your '''home''' directory.<br><br>
# Issue a command to '''confirm''' you are located in your '''home''' directory.<br><br>We want to create a Bash Shell script to welcome the user by their ''username''.<br>Let's first look at selecting an appropriate filename for your shell script.<br><br>
+
# Issue a Linux command to create a directory called '''sed'''<br><br>
# Issue the following linux command to check if the filename called '''hello'''<br>already exists as a command:<br><span style="color:blue;font-weight:bold;font-family:courier;">which hello</span><br><br>The output from this command should indicate that the shell did NOT<br>find any directories that contained this filename that could represent<br>a command; therefore, this shell script name CAN be used.<br><br>[[Image:hello0.png|thumb|right|200px|Using a '''text editor''' to add Linux commands in to the '''hello''' shell script.]]
+
# Issue a Linux command to <u>change</u> to the '''sed''' directory and confirm that you are located in the '''sed''' directory.<br><br>
# Use a '''text editor''' like '''vi''' or '''nano''' to create the text file called '''hello'''<br><br>
+
# Issue the following Linux command to download the data.txt file<br>('''copy and paste''' to save time):<br><span style="color:blue;font-weight:bold;font-family:courier;">wget <nowiki>https://ict.senecacollege.ca/~murray.saul/uli101/data.txt</nowiki></span><br><br>
# Enter the following two lines in your shell script:<br><span style="font-family:courier;font-weight:bold;">echo<br>echo "Hello $USER"<br>echo</span><br><br>'''NOTE:''' The variable called '''USER''' is an '''environment variable''' that contains the <u>current</u> user's login name. If you wanted to share your shell script with other users, when they run the shell script, they will greeted by <u>their</u> username. ''Environment variables'' make your shell script adaptable by ALL users.<br><br>
+
# Issue the '''more''' command to quickly view the contents of the '''data.txt''' file.<br>When finished, exit the more command by pressing the letter <span style="color:blue;font-weight:bold;font-family:courier;">q</span>[[Image:sed-1.png|thumb|right|300px|Issuing the '''p''' instruction without using the '''-n''' option (to suppress original output) will display lines twice.]]<br><br>The '''p''' instruction with the '''sed''' command is used to<br>'''print''' (i.e. ''display'') the contents of a text file.<br><br>
# '''Save''' your editing session and '''exit''' the text editor.<br><br>Instead of issuing the '''bash''' command followed by your shell script pathname as an ''argument'',<br>let's simply run it by its filename. This is the most common method of running shell scripts.<br><br><table align="right"><tr valign="top"><td>[[Image:no-execute.png|thumb|right|230px|An '''error message''' will appear when trying to run a shell script by name that does NOT have '''execute''' permissions.]]</td><td>[[Image:hello1.png|thumb|right|150px|Output from running your '''hello''' shell script (YourUserID representing <u>your</u> username).]]</td></table>
+
# Issue the following Linux command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed 'p' data.txt</span><br><br>'''NOTE: You should notice that each line appears twice'''.<br><br>The reason why standard output appears twice is that the sed command<br>(without the '''-n option''') displays all lines regardless of an address used.<br><br>We will use '''pipeline commands''' to both display stdout to the screen and save to files<br>for <u>confirmation</u> of running these pipeline commands when run a '''checking-script''' later in this investigation.<br><br>
# Issue the following linux command to run your shell script in your current directory:<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello</span><br><br>You should notice an '''ERROR message''' indicating you don't have permissions to run the file. To fix this, you need to<br>'''add execute permissions''' prior to running the shell script.<br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed -n 'p' data.txt | tee sed-1.txt</span><br><br>What do you notice? You should see only one line.<br><br>You can specify an '''address''' to display lines using the sed utility<br>(eg. ''line #'', '''line #s''' or range of '''line #s''').<br><br>
# Issue the following linux command to '''add'''<br>execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x hello</span><br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed -n '1 p' data.txt | tee sed-2.txt</span><br><br>You should see the first line of the text file displayed.<br>What other command is used to only display the first line in a file?<br><br>[[Image:sed-2.png|thumb|right|500px|Using the sed command to display a '''range''' of lines.]]
# Issue the following to run your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello</span><br><br>Did your shell script run?<br><br><span style="color:red;">'''ATTENTION:''' Students might get FRUSTRATED when performing their '''assignment 3''' when their Bash shell scripts have errors.<br>One major cause is the the OUTPUT of their Bash shell script when run does not '''EXACTLY match''' the required output<br>for the '''correct''' Bash shell script.<br><br>This requires that you CAREFULLY '''read''' the requirements of your Bash shell script and create it to the EXACT specifications</span><br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed -n '2,5 p' data.txt | tee sed-3.txt</span><br><br>What is displayed? How would you modify the sed command to display the line range 10 to 50?<br><br>The '''s''' instruction is used to '''substitute''' text<br>(a similar to method was demonstrated in the vi editor in tutorial 9).<br><br>
# Issue the following Linux command to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">bash /home/murray.saul/myscripts/week10-check-1</span><br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed '2,5 s/TUTORIAL/LESSON/g' data.txt | tee sed-4.txt | more</span><br><br>What do you notice? View the original contents of lines 2 to 5 in the '''data.txt''' file<br>in another shell to confirm that the substitution occurred.<br><br>[[Image:sed-3.png|thumb|right|500px|Using the sed command with the '''-q''' option to display up to a line number, then quit.]]The '''q''' instruction terminates or '''quits''' the execution of the sed utility as soon as it is read in a particular line or matching pattern.<br><br>
# If you encounter errors, make corrections and '''re-run''' the checking script until you<br>receive a congratulations message, then you can proceed.<br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed '11 q' data.txt | tee sed-5.txt</span><br><br>What did you notice? How many lines were displayed<br>before the sed command exited?<br><br>You can use '''regular expressions''' to select lines that match a pattern. In fact,<br>the sed command was one of the <u>first</u> Linux commands that used regular expression.<br><br>The rules remain the same for using regular expressions as demonstrated in '''tutorial 9'''<br>except the regular expression must be contained within '''forward slashes'''<br>(eg. <span style="font-family:courier;font-weight:bold;">/regexp/</span> ).<br><br>[[Image:sed-4.png|thumb|right|400px|Using the sed command using regular expressions with '''anchors'''.]]
::In the next investigation, you will learn to create and run shell scripts that<br >use '''variables''', '''positional''' and '''special parameters'''. You will also learn how to<br><u>add</u> a '''she-bang line''' at the top of a shell script to force it to run in a specified shell.<br><br>Proceed to the next investigation.<br><br>
+
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed -n '/^The/ p' data.txt | tee sed-6.txt</span><br><br>What do you notice?<br><br>
 +
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">sed -n '/d$/ p' data.txt | tee sed-7.txt</span><br><br>What do you notice?<br><br>The '''sed''' utility can also be used as a '''filter''' to manipulate text that<br>was generated from Linux commands.<br><br>[[Image:sed-5.png|thumb|right|400px|Using the sed command with '''pipeline''' commands.]]
 +
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">who | sed -n '/^[a-m]/ p' | tee sed-8.txt | more</span><br><br>What did you notice?<br><br>
 +
# Issue the following Linux pipeline command:<br><span style="color:blue;font-weight:bold;font-family:courier;">ls | sed -n '/txt$/ p' | tee sed-9.txt</span><br><br>What did you notice?<br><br>
 +
# Issue the following to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">~uli101/week11-check-1</span><br><br>If you encounter errors, make corrections and '''re-run''' the checking script<br>until you receive a congratulations message, then you can proceed.<br><br>
  
=INVESTIGATION 2: SHE-BANG LINE / VARIABLES / PARAMETERS=
+
:In the next investigation, you will learn how to manipulate text using the '''awk''' utility.<br><br>
 
 
In this section, you will add a '''she-bang''' line at the top of your shell script to force the shell script to run in a<br>specified shell when executed. You will also learn how to use '''variables''', '''positional''' and '''special parameters'''<br>to make your shell scripts more adaptable.
 
  
 +
=INVESTIGATION 2: USING THE AWK UTILITY =
  
 +
In this investigation, you will learn how to use the awk utility to manipulate text and generate reports.
  
 
'''Perform the Following Steps:'''
 
'''Perform the Following Steps:'''
  
# Confirm that you are located in your '''home''' directory in your Matrix account.<br><br>Let's run shell scripts <u>with</u> and <u>without</u> '''she-bang''' line at the top of your shell script<br>to demonstrate  why using a ''she-bang'' line should be included in a shell script to force<br>the shell script to be run in a ''specific'' shell.<br><br>
+
# Change to your '''home''' directory and issue a command to '''confirm'''<br>you are located in your ''home'' directory.<br><br>
# Use a text editor to '''edit''' the '''hello''' shell script that you created in the <u>previous</u> investigation.<br><br>
+
# Issue a Linux command to create a directory called '''awk'''<br><br>
# Add the following line to the <u>bottom</u> of the file ('''copy''' and '''paste''' to prevent ''errors''):<br><span style="font-family:courier;font-weight:bold;">echo "The current shell you are using is: $(ps -o cmd= -p $$|cut -d' ' -f1)"</span><br><br>'''FYI:''' This command displays the '''name''' of the ''shell'' that the shell script is running in.<br>The command within <span style="font-family:courier;font-weight:bold;">$( )</span> uses a technique known as '''command substitution'''.<br><br>
+
# Issue a Linux command to <u>change</u> to the '''awk''' directory and confirm you are located in the '''awk''' directory.<br><br>Let's download a database file that contains information regarding classic cars.<br><br>
# Issue the following Linux command to change to an older shell called the '''Bourne Shell''':<br><span style="color:blue;font-weight:bold;font-family:courier;">sh</span><br><br>You should notice your '''shell prompt changed''' which indicates<br>that you are in a different shell.<br><br>[[Image:hello2.png|thumb|right|275px|Changing the Bourne shell and running shell script '''without''' a '''She-bang''' line.]]
+
# Issue the following linux command ('''copy and paste''' to save time):<br><span style="color:blue;font-weight:bold;font-family:courier;">wget <nowiki>https://ict.senecacollege.ca/~murray.saul/uli101/cars.txt</nowiki></span><br><br>
# Issue the following Linux command to run your shell script in the ''Bourne Shell'':<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello</span><br><br>You should see that you are currently running the shell script "'''sh'''"<br>which represents the '''Bourne shell'''.<br><br>'''NOTE:''' Due to the fact that shells (and their features) have '''evolved''' over a period of time,<br>an error may occur if you include a '''NEWER shell feature''' (e.g. ''Bash Shell'') but run it in an '''OLDER shell''' (For example: the ''Bourne Shell'').<br><br>[[Image:she-bang-1.png|thumb|right|275px|Adding a '''she-bang line''' at the BEGINNING of the first line in you shell script forces the shell script to be run in that specific shell (in this case, the Bash shell).]]You can add a '''special comment''' called a '''she-bang line''' at the BEGINNING of the <br><u>FIRST line</u> of your shell script to '''force''' it to run in the shell you want<br>(for example: the Bash shell).<br><br>
+
# Issue the '''cat''' command to quickly view the contents of the '''cars.txt''' file.<br><br>The "'''print'''" action (command) is the <u>default</u> action of awk to print<br>all selected lines that match a '''pattern'''.<br><br>This '''action''' (contained in braces) can provide more options<br>such as printing '''specific fields''' of selected lines (or records) from a database.<br><br>[[Image:awk-1.png|thumb|right|400px|Using the awk command to display matches of the pattern '''ford'''.]]
# Edit your '''hello''' shell script using a text editor.<br><br>
+
# Issue the following linux command all to display all lines (i.e. records) in the '''cars.txt''' database that matches the pattern (or "make") called '''ford''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '/ford/ {print}' cars.txt</span><br><br>We will use '''pipeline commands''' to both display stdout to the screen and save to files for <u>confirmation</u> of running these pipeline commands when run a '''checking-script''' later in this investigation.<br><br>
# '''Insert''' the following line at the '''beginning''' of the '''first''' line of your hello file:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash</span><br><br>This is referred to as a '''she-bang line'''. It forces this script to be run in the '''Bash Shell'''.<br>When your Bash Shell script finishes execution, you are returned to your current shell that you are using (which in our case in Matrix, is still the Bash shell).<br><br>[[Image:hello3.png|thumb|right|275px|Changing the Bourne shell and running shell script '''with''' a '''She-bang''' line (forcing script to run in the '''Bash''' shell).]]
+
# Issue the following linux pipeline command all to display records<br>in the '''cars.txt''' database that contain the pattern (i.e. make) '''ford''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '/ford/' cars.txt | tee awk-1.txt</span><br><br>What do you notice? You should notice ALL lines displayed <u>without</u> using '''search criteria'''.<br><br>You can use ''builtin'' '''variables''' with the '''print''' command for further processing.<br>We will discuss the following variables in this tutorial:<br><br>[[Image:awk-2.png|thumb|right|400px|Using the awk command to print search results by '''field number'''.]]'''$0''' - Current record (entire line)<br>'''$1''' - First field in record<br>'''$n''' - nth field in record<br>'''NR''' - Record Number (order in database)<br> '''NF''' - Number of fields in current record<br><br>For a listing of more variables, please consult your course notes.<br><br>
# '''Save''' your editing changes and '''exit''' your text editor.<br><br>
+
# Issue the following linux pipeline command to display the '''model''', '''year''', '''quantity''' and price<br>in the '''cars.txt''' database for makes of '''chevy''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '/chevy/ {print $2,$3,$4,$5}' cars.txt | tee awk-2.txt</span><br><br>Notice that a '''space''' is the delimiter for the fields that appear as standard output.<br><br>The '''tilde character''' '''~''' is used to search for a pattern or display standard output for a particular field.<br><br>
# While in the ''Bourne shell'', issue the following Linux command:<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello</span><br><br>You should notice that the shell name is running in the '''Bash shell''' (i.e. ''/bin/bash'').<br><br> It is a good idea to rename your shell script to include an '''extension''' to<br>indicate that it is a '''Bash Shell''' script. <br><br>
+
# Issue the following linux pipeline command to display all '''plymouths''' ('''plym''')<br>by '''model name''', '''price''' and '''quantity''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$1 ~ /plym/ {print $2,$3,$4,$5}' cars.txt | tee awk-3.txt</span><br><br>You can also use '''comparison operators''' to specify conditions for processing with matched patterns<br>when using the awk command. Since they are used WITHIN the awk expression,<br>they are not confused with redirection symbols<br><br>[[Image:awk-3.png|thumb|right|400px|Using the awk command to display results based on '''comparison operators'''.]]'''<''' &nbsp;&nbsp;&nbsp;&nbsp;Less than<br>'''<=''' &nbsp;&nbsp;Less than or equal<br>'''>''' &nbsp;&nbsp;&nbsp;&nbsp;Greater than<br>'''>=''' &nbsp;&nbsp;Greater than or equal<br>'''==''' &nbsp;&nbsp;Equal<br>'''!=''' &nbsp;&nbsp;&nbsp;Not equal<br><br>
# Issue the following Linux command to rename your shell script file:<br><span style="color:blue;font-weight:bold;font-family:courier;">mv hello hello.bash</span><br><br>
+
# Issue the following linux pipeline command to display display the '''car make''', '''model''', '''quantity''' and '''price''' of all vehicles whose '''prices are less than $5,000''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$5 < 5000 {print $1,$2,$4,$5}' cars.txt | tee awk-4.txt</span><br><br>What do you notice?<br><br>
# Confirm that the renamed Bash shell script works by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello.bash</span><br><br>
+
# Issue the following linux pipeline command to display display '''price''',<br>'''quantity''', '''model''' and '''car make''' of vehicles whose '''prices are less than $5,000''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$5 < 5000 {print $5,$4,$2,$1}' cars.txt | tee awk-5.txt</span><br><br>
# Enter the following Linux command to '''exit''' the ''Bourne shell'' and return to your ''Bash shell'':<br><span style="color:blue;font-weight:bold;font-family:courier;">exit</span><br><br>'''Environment variables''' are used to set the environment of the shell or shell scripts<br>Let's include some '''ENVIRONMENT variables''' in our Bash Shell script.<br><br>
+
# Issue the following linux pipeline command to display the '''car make''',<br>'''year''' and '''quantity''' of cars that '''begin''' with the '''letter 'f'''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$1 ~ /^f/ {print $1,$2,$4}' cars.txt | tee awk-6.txt</span><br><br>[[Image:awk-4.png|thumb|right|400px|Using the awk command to display combined search results based on '''compound operators'''.]]Combined pattern searches can be made<br>by using '''compound operator''' symbols:<br><br>'''&&''' &nbsp;&nbsp;&nbsp;&nbsp;(and)<br>'''||''' &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(or)<br><br>
# Use a text editor to edit the shell script called '''hello.bash'''<br><br>
+
# Issue the following linux pipeline command to list all '''fords'''<br>whose '''price is greater than $10,000''':<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$1 ~ /ford/ && $5 > 10000 {print $0}' cars.txt | tee awk-7.txt</span><br><br>
# Add the following lines to the <u>bottom</u> of the ''hello.bash'' file:<br><span style="font-family:courier;font-weight:bold;">echo<br>echo "The current directory location is: $PWD"<br>echo "The current user home directory is: $HOME"<br>echo</span><br><br>
+
# Issue the following linux command ('''copy and paste''' to save time):<br><span style="color:blue;font-weight:bold;font-family:courier;">wget <nowiki>https://ict.senecacollege.ca/~murray.saul/uli101/cars2.txt</nowiki></span><br><br>
# Save your editing changes and exit your text editor.<br><br>[[Image:hello4-0.png|thumb|right|330px|Running <u>modified</u> ''hello.bash'' Bash shell script by using relative pathname: <span style="font-family:courier;">''./hello.bash''</span>]]
+
# Issue the '''cat''' command to quickly view the contents of the '''cars2.txt''' file.<br><br>
# Run your modified Bash shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./hello.bash</span><br><br>Take time to view the output and the values of the environment variables.<br><br>You can modify the PATH variable to include the current directory (i.e. ".")<br>so you can run the command by just script filename<br>(eg. <span style="font-family:courier;font-weight:bold;">hello.bash</span> as opposed to <span style="font-family:courier;font-weight:bold;">./hello.bash</span>)<br><br>
+
# Issue the following linux pipeline command to display the '''year'''<br>and '''quantity''' of cars that '''begin''' with the '''letter 'f'''' for the '''cars2.txt''' database:<br><span style="color:blue;font-weight:bold;font-family:courier;">awk '$1 ~ /^f/ {print $2,$4}' cars2.txt | tee awk-8.txt</span><br><br>What did you notice?<br><br>The problem is that the '''cars2.txt''' database separates each field by a semi-colon (''';''') <u>instead</u> of '''TAB'''.<br>Therefore, it does not recognize the second and fourth fields.<br><br>You need to issue awk with the -F option to indicate that this file's fields are separated (delimited) by a semi-colorn.<br><br>
# Issue the following Linux command to add your current directory to the '''PATH''' environment variable:<br><span style="color:blue;font-weight:bold;font-family:courier;">PATH=$PATH:.</span><br><br>[[Image:hello4.png|thumb|right|330px|Running <u>modified</u> ''hello.bash'' Bash shell script by entering <u>just</u> '''filename''' (i.e. <span style="font-family:courier;">''hello.bash''</span> and NOT <span style="font-family:courier;">''./hello.bash''</span> shown in previous diagram).]]
+
# Issue the following linux pipeline command to display the '''year'''<br>and '''quantity''' of cars that '''begin''' with the '''letter 'f'''' for the '''cars2.txt''' database:<br><span style="color:blue;font-weight:bold;font-family:courier;">awk -F";" '$1 ~ /^f/ {print $2,$4}' cars2.txt | tee awk-9.txt</span><br><br>What did you notice this time?<br><br>
# Issue the following Linux command to confirm that the current directory '''"."'''<br>has been '''added''' to the <u>end</u> of the '''PATH''' environment variable:<br><span style="color:blue;font-weight:bold;font-family:courier;">echo $PATH</span><br><br>
+
# Issue the following to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">~uli101/week11-check-2</span><br><br>If you encounter errors, make corrections and '''re-run''' the checking script until you<br>receive a congratulations message, then you can proceed.<br><br>
# Issue the following to run your Bash shell script just by name:<br><span style="color:blue;font-weight:bold;font-family:courier;">hello.bash</span><br><br>Did your Bash shell script run?<br><br>
 
# Exit your Matrix session, and log back into your Matrix session.<br><br>
 
# Re-run the '''hello.bash''' shell script by just using the name.<br><br>What did you notice?<br><br>The setting of the '''PATH''' environment variable only worked in the current session only.<br>If you exit the current Matrix session, then the recently changed settings for environment variables will be lost.<br>You will in a <u>future</u> tutorial how to set environment variables in '''start-up''' files.<br><br><span style="color:red;">'''ATTENTION:''' Students might get FRUSTRATED when performing their '''assignment 3''' when their Bash shell scripts have errors.<br>One major cause is the the OUTPUT of their Bash shell script when run does not '''EXACTLY match''' the required output<br>for the '''correct''' Bash shell script.<br><br>This requires that you CAREFULLY '''read''' the requirements of your Bash shell script and create it to the EXACT specifications</span>.<br><br>
 
# Issue the following Linux command to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">bash /home/murray.saul/myscripts/week10-check-2 | more</span><br><br>If you encounter errors, make corrections and '''re-run''' the checking script until you<br>receive a congratulations message, then you can proceed.<br><br>Unlike '''Environment variables''' that are used to set the environment of the shell or shell scripts,<br>'''User-created''' variables are "customized" that the user can set or allow a user to set the variables' values.<br>Let's create a Bash shell script that contain '''user-created variables'''.<br><br>
 
# Use a text editor to create a Bash shell script called '''user-variables.bash'''<br><br>
 
# Add the following lines to the beginning of the ''user-variables.bash'' file:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>read -p "Enter your Full Name: " name<br>read -p "Enter your age (in years): " age<br>echo "Hello $name - You are $age years old"</span><br><br>
 
# Save your editing changes and exit your text editor.<br><br>[[Image:user-variable1.png|thumb|right|300px|Prompting user to enter data via the '''read -p''' command storing into '''user-created variable'''.]]
 
# Issue the '''chmod''' command to add '''execute permissions'''<br>for the '''user-variables.bash''' file.<br><br>
 
# Issue the following to run the user-variables.bash Bash shell script<br> (enter '''your Full name''' and '''your age''' when prompted):<br><span style="color:blue;font-weight:bold;font-family:courier;">./user-variables.bash</span><br><br>What did you notice?<br><br>
 
# Use a text editor to '''modify''' your Bash shell script called '''user-variables.bash'''<br><br>
 
# '''Insert''' the following lines immediately <u>'''below'''</u> the '''she-bang''' line:<br><span style="font-family:courier;font-weight:bold;">age=25<br>readonly age</span><br><br>
 
# Save your editing changes and exit your text editor.<br><br>[[Image:user-variable2.png|thumb|right|330px|Trying to change the value of a '''read-only''' variable'''.]]
 
# Issue the following to run the user-variables.bash Bash shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">./user-variables.bash</span><br><br>What do you notice when you try to change the age variable? Why?<br><br>A '''positional parameter''' is a special variable within a shell program; its value is set from '''arguments''' contained in a shell script or using the set command.<br>Let's use '''positional parameters''' and '''special parameters''' in a Bash shell script.<br><br>
 
# Use a text editor to create a file called '''parameters.bash'''<br><br>
 
# Add the following lines to the beginning of this file:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>echo \$0: $0<br>echo \$2: $2<br>echo \$3: $3<br><br>echo \$#: $#<br>echo \$*: $*<br><br>shift 2<br>echo \$#: $#<br>echo \$*: $*</span><br><br>
 
# Save your editing changes and exit your text editor.<br><br>Notice how the quoting character "'''\'''" is used to display positional parameters like "'''$2'''"<br>as opposed to the value stored in the <u>second</u> positional parameter.<br><br>
 
# Issue the '''chmod''' command to add '''execute permissions''' for the user for the '''parameters.bash''' file.<br><br>[[Image:parameter1.png|thumb|right|250px|Results from running shell script (with arguments) that use '''positional parameters''' and '''special parameters'''.]]
 
# Issue the following to run the '''user-variables.bash''' Bash shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">./parameters.bash</span><br><br>What happened?<br><br>The values for some of the ''positional parameters'' and ''special parameters'' may NOT be<br>displayed properly since you did NOT provide any '''arguments''' when <u>running</u> your Bash shell script.<br><br>
 
# Issue the following to run the user-variables.bash Bash shell script with arguments:<br><span style="color:blue;font-weight:bold;font-family:courier;">./parameters.bash 1 2 3 4 5 6 7 8</span><br><br>What do you notice?<br><br>Take some time to view the results and how the ''parameters'' have changed when using the '''shift''' command. <br>
 
  
 +
= LINUX PRACTICE QUESTIONS =
  
:In the next investigation, you will learn to use '''command substitution''' and '''math operations''' in your shell scripts.
+
The purpose of this section is to obtain '''extra practice''' to help with '''quizzes''', your '''midterm''', and your '''final exam'''.
<br>
 
  
=INVESTIGATION 3: COMMAND SUBSTITUTION / MATH OPERATIONS=
+
Here is a link to the MS Word Document of ALL of the questions displayed below but with extra room to answer on the document to
<br>
+
simulate a quiz:
In this section, you will learn how to use '''command substitution''' and '''math operations''' in your shell scripts.
 
  
 +
https://ict.senecacollege.ca/~murray.saul/uli101/uli101_week11_practice.docx
  
'''Command Substitution'''
+
Your instructor may take-up these questions during class. It is up to the student to attend classes in order to obtain the answers to the following questions. Your instructor will NOT provide these answers in any other form (eg. e-mail, etc).
  
Command Substitution is a method of running a Linux command that provides '''stdout'''<br>that is used as '''argument(s)''' for <u>another</u> Linux command.
 
  
''For example:''
+
'''Review Questions:'''
  
<span style="font-family:courier;font-weight:bold;">echo "The current date and time is: $(date)"</span>
+
'''Part A: Display Results from Using the sed Utility'''
  
 +
Note the contents from the following tab-delimited file called '''~murray.saul/uli101/stuff.txt''':
 +
(this file pathname exists for checking your work)
  
Let's create a Bash shell script that uses command substitution that displays<br>'''text''' and values of '''environment variables''' in a series of <span style="font-family:courier;font-weight:bold;">echo</span> statements.<br><br>
+
<pre>
 
+
Line one.
'''Perform the Following Steps:'''
+
This is the second line.
 
+
This is the third.
# Confirm that you are located in your '''home''' directory in your Matrix account.<br><br>
+
This is line four.
# Use a text editor to create a Bash shell script called '''command-substitution.bash'''<br><br>
+
Five.
# Add the following lines to the beginning of this file:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>echo<br>echo "MY ACCOUNT INFORMATION:"<br>echo<br>echo "Username: $(whoami)"<br>echo<br>echo "Current Directory: $(pwd)"<br>echo<br></span><br>[[Image:commandsubstitution1.png|thumb|right|275px|Output of a shell script using command substitution.]]
+
Line six follows
# Save your editing changes and exit your text editor.<br><br>
+
Followed by 7
# Issue the '''chmod''' command to add execute permissions<br>for the '''command-substitution.bash''' file.<br><br>
+
Now line 8
# Issue the following to run the user-variables.bash Bash shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">./command-substitution.bash</span><br><br>Confirm that your shell script displays the correct information for your Matrix account.<br><br>
+
and line nine
 
+
Finally, line 10
'''Math Operations'''
+
</pre>
 
 
Since you do NOT have to declare the '''data-type''' of a variable (as opposed to compiled program<br>such as the C-programming language), numbers would be stored as '''text''' in variables.<br>Therefore, it is important to use the construct <span style="color:blue;font-family:courier;font-weight:bold">(( ))</span> to <u>convert</u> numbers (stored as ''text'') into '''numbers'''.
 
 
 
We will now learn how to use this construct in order to perform math operations for shell scripts.
 
<br><br>
 
'''Perform the Following Steps:'''
 
  
# Confirm that you are located in your '''home''' directory in your Matrix account.<br><br>Let's demonstrate that the Unix/Linux shell stores numbers as ascii text<br>which can cause problems when performing math operations.<br><br>
 
# Issue the following Linux command from the shell:<br><span style="color:blue;font-family:courier;font-weight:bold">echo "1 + 2"</span><br><br>What did you notice?<br><br>
 
# To demonstrate the need for the '''(( ))''' construct, issue the following Linux commands (using the ''math construct''):<br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((1 + 2))"</span><br><br>What did you notice?<br>The <span style="font-family:courier;font-weight:bold">(( ))</span> construct converted values '''1''' and '''2''' from ''text'' to '''binary numbers'''.<br>The '''$''' in front of the construct '''expands''' the result of the calculation.<br><br>
 
# Issue the following Linux commands demonstrating other types of math calculations:<br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((2 - 3))"</span><br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((2 * 3))"</span><br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((2 / 3))"</span><br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((2 ** 3))"</span><br><br>'''NOTE:''' You may notice that '''dividing''' '''2''' by '''3''' shows a '''zero''' result. To perform decimal calculations would require<br>the use the '''awk''' or '''bc''' Linux commands (we will '''NOT''' cover that method to work with ''decimal numbers'' in this course).<br><br>You can use the ''math construct'' with variables as well.<br><br>
 
# Issue the following Linux commands demonstrating using the ''math construct'' with '''variables''':<br><span style="color:blue;font-family:courier;font-weight:bold">num1=34</span><br><span style="color:blue;font-family:courier;font-weight:bold">num2=12</span><br><span style="color:blue;font-family:courier;font-weight:bold">echo "$((num1 * num2))"</span><br><br>What did you notice?<br><br>You can create variables and assign them values in the ''math construct'' as well.<br><br>
 
# Issue the following Linux commands demonstrating using the math construct with '''variables''':<br><span style="color:blue;font-family:courier;font-weight:bold">num1=5</span><br><span style="color:blue;font-family:courier;font-weight:bold">num2=3</span><br><span style="color:blue;font-family:courier;font-weight:bold">((result = num1 ** num2))</span><br><span style="color:blue;font-family:courier;font-weight:bold">echo "The result is: $result"</span><br><br>
 
# Use a text editor to create a Bash shell script called '''dog-years.bash'''<br><br>
 
# Add the following lines to the beginning of this file:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>echo<br>dogFactor=7<br>read -p "Please enter your age (in years): " humanYears<br>((dogYears = humanYears * dogFactor))<br>echo "You age in dog-years is: $dogYears"<br>echo<br></span><br>
 
# Save your editing changes and exit your text editor.<br><br>[[Image:mathops1.png|thumb|right|275px|Output of a shell script with math operations using the '''math construct'''.]]
 
# Issue the '''chmod''' command to add execute permissions<br>for the user for the '''dog-years.bash''' file.<br><br>
 
# Issue the following to run the '''user-variables.bash''' Bash shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">./dog-years.bash</span><br><br>Enter <u>your</u> age to see what happens.<br><br>
 
# Issue the following to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">bash /home/murray.saul/myscripts/week10-check-3 | more</span><br><br>If you encounter errors, make corrections and '''re-run''' the checking script until you<br>receive a congratulations message, then you can proceed.<br><br>
 
  
:In the next investigation, you will use '''control-flow statements''' to allow your shell scripts<br>to perform differently under different situations.<br><br>
+
Write the results of each of the following Linux commands for the above-mentioned file:
  
=INVESTIGATION 4: CONTROL FLOW STATEMENTS =
 
<br>
 
In this section, you will learn how to use '''control-flow statements'''<br>to make your shell script ''behave differently'' under ''different situations or conditions''.
 
  
 +
# <span style="font-family:courier;font-weight:bold">sed -n '3,6 p' ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">sed '4 q' ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">sed '/the/ d' ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">sed 's/line/NUMBER/g' ~murray.saul/uli101/stuff.txt</span>
  
'''Perform the Following Steps:'''
 
<br><br>
 
# Confirm that you are located in your '''home''' directory in your Matrix account.<br><br>
 
# Issue the following Linux commands at the Bash shell prompt to assign values to several variables:<br><span style="color:blue;font-weight:bold;font-family:courier;">course="ULI101"<br>number1=5<br>number2=10</span><br><br>You can test conditions by issuing '''Linux commands / pipeline commands''' <u>or</u><br>by using the '''test''' command. We  will demonstrate using the '''test''' command in this tutorial,<br>and then demonstrate by issuing a ''Linux command / pipeline command'' in a later tutorial.<br><br>
 
# Issue the following Linux command to test a condition:<br><span style="color:blue;font-weight:bold;font-family:courier;">test $course = "ULI101"</span><br><br>The '''$?''' variable is used to store an '''exit status''' of the <u>previously-issued</u> command (including the test command).<br>If the exit status is '''zero''', then it indicates a ''TRUE'' value and if the status is '''non-zero''', then it indicates a ''FALSE'' value.<br><br>
 
# Issue the following Linux command to view the '''exit status''' of the previously-issued '''test''' command:<br><span style="color:blue;font-weight:bold;font-family:courier;">echo $?</span><br><br>Based on the ''exit status'' value, is the result ''TRUE'' or ''FALSE''?<br><br>
 
# Issue the following Linux command to test another condition:<br><span style="color:blue;font-weight:bold;font-family:courier;">test $course = "uli101"</span><br><br>
 
# Issue the following Linux command to view the ''exit status'' of the previously-issued '''test''' command:<br><span style="color:blue;font-weight:bold;font-family:courier;">echo $?</span><br><br>Based on the ''exit status'' value, is the result TRUE or FALSE?<br>The value is non-zero (FALSE) since UPPERCASE characters<br>are different than lowercase characters.<br><br>
 
# Issue the following Linux command to test another condition:<br><span style="color:blue;font-weight:bold;font-family:courier;">test $course != "uli101"</span><br><br>
 
# Issue a linux command to display the value of '''$?'''<br><br>What is the result? Why?<br><br>
 
# Issue the following Linux command to test a condition involving earlier assigned variables:<br><span style="color:blue;font-weight:bold;font-family:courier;">test $number1 > $number2</span><br><br>
 
# Issue a Linux command to display the value of '''$?'''<br><br>'''NOTE:''' You will notice that something is '''wrong'''.<br>The exit status '''$?''' shows a zero (TRUE) value, but the number 5 is definitely NOT greater than 10.<br>The problem is that the symbols '''&lt;''' and '''&gt;''' are interpreted as REDIRECTION symbols!<br><br>
 
# To prove this, issue the following Linux command :<br><span style="color:blue;font-weight:bold;font-family:courier;">ls  -l 10</span><br><br>You should notice a file called "'''10'''". The incorrectly issued '''test''' command '''used redirection'''<br>to create an empty file and assigning the exit status variable a ''TRUE'' value!<br><br>To prevent problems when issuing the '''test''' command when comparing numbers,<br>you can use the following options:<br>'''-lt''' (&lt;), '''-le''' (&lt;&#61;), '''-gt''' (&gt;), '''-ge''' (&gt;&#61;;), '''-eq''' (&#61;), '''-ne''' (!&#61;)<br><br>
 
# Issue the correct Linux command to properly test both values:<br><span style="color:blue;font-weight:bold;font-family:courier;">test $number1 -gt $number2</span><br><br>
 
# Issue a Linux command to display the value of '''$?'''.<br><br>You should notice that the exit status value is now ''FALSE'' which is the correct result.<br><br>
 
# The '''test''' command can be substituted by '''square brackets''' '''&#91;  &#93;''' which contains the '''test''' condition<br>within the square brackets. You need to have spaces between the brackets and the test condition;<br>otherwise, you will get a test error.<br><br>
 
# To generate a '''test error''', copy and paste the following '''test''' command:<br><span style="color:blue;font-weight:bold;font-family:courier;">&#91;$number1 -gt $number2&#93;</span><br><br>The reason for the error was that you need '''spaces''' between the '''square brackets''' and the '''test condition'''.<br><br>
 
# Copy and paste the following (correct) '''test''' command:<br><span style="color:blue;font-weight:bold;font-family:courier;">&#91; $number1 -gt $number2 &#93;</span><br><br>
 
# Issue a command to view the value of the '''exit status''' of the previously issued '''test''' command.<br>You should notice that is works properly.<br><br>Now that we have learned how to test conditions, let's learn about '''control-flow''' statements.<br><br>'''Logic statements''' are used to create '''different paths''' or directions that the shell script will take<br>based on the <u>result</u> of the '''test condition'''. In this tutorial,<br>we will only focus on the '''if''' and '''if-else''' logic statement.<br><br>
 
# Use a text editor like vi or nano to create the text file called '''if-1.bash''' (eg. <span style="color:blue;font-weight:bold;font-family:courier;">vi if-1.bash</span>)<br><br>
 
# Enter the following lines in your shell script:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>num1=5<br>num2=10<br>if [ $num1 -lt $num2 ]<br>then<br>&nbsp;&nbsp;&nbsp;echo "num1 is less than num2"<br>fi</span><br><br>
 
# Save your editing session and exit the text editor<br>(eg. with vi: press '''ESC''', then type ''':wx''' followed by '''ENTER''').<br><br>[[Image:if-1.png|thumb|right|200px|Output of a shell script using the '''if''' control-flow statement.]]
 
# Issue the following Linux command to add execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x if-1.bash</span><br><br>
 
# Run your shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./if-1.bash</span><br><br>Confirm that the output indicates a correct result.<br><br>
 
# Use a text editor like vi or nano to create the text file called '''if-2.bash''' (eg. <span style="color:blue;font-weight:bold;font-family:courier;">vi if-2.bash</span>)<br><br>
 
# Enter the following lines in your shell script:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>read -p "Enter the first number: " num1<br>read -p "Enter the second number: " num2<br>if [ $num1 -gt $num2 ]<br>then<br>&nbsp;&nbsp;&nbsp;echo "The first number is greater than the second number."<br>fi</span><br><br>
 
# Save your editing session and exit the text editor<br>(eg. with vi: press '''ESC''', then type ''':wx''' followed by '''ENTER''').<br><br>[[Image:if-2.png|thumb|right|320px|Output of a shell script using the '''read''' command and the '''if''' control-flow statement.]]
 
# Issue the following Linux command to add execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x if-2.bash</span><br><br>
 
# Run your shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./if-2.bash</span><br><br>When prompted, make certain that the '''first number'''<br>is <u>greater than</u> the '''second number'''<br><br>
 
# Run the <span style="font-weight:bold;font-family:courier;">./if-2.bash</span> Bash shell script again.<br><br> When prompted, make certain that the '''first number'''<br>is <u>less than or equal to</u> the '''second number'''<br>What happens?<br><br>Let's use an '''if-else''' statement to provide an alternative if the first number is less than or equal to the second number.<br><br>
 
# Use a text editor like vi or nano to create the text file called '''if-3.bash''' (eg. <span style="color:blue;font-weight:bold;font-family:courier;">vi if-3.bash</span>)<br><br>
 
# Enter the following lines in your shell script:<br><span style="font-family:courier;font-weight:bold">#!/bin/bash<br>read -p "Enter the first number: " num1<br>read -p "Enter the second number: " num2<br>if [ $num1 -gt $num2 ]<br>then<br>&nbsp;&nbsp;&nbsp;echo "The first number is greater than the second number."<br>else<br>&nbsp;&nbsp;&nbsp;echo "The first number is less than or equal to the second number."<br>fi</span><br><br>
 
# Save your editing session and exit the text editor (eg. with vi: press '''ESC''', then type ''':wx''' followed by '''ENTER''').<br><br>[[Image:if-3.png|thumb|right|330px|Output of a shell script using the '''if-else''' control-flow statement.]]
 
# Issue the following Linux command to add execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x if-3.bash</span><br><br>
 
# Run your shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./if-3.bash</span><br><br>What do you notice? Try running the script several times with numbers different and equal to each other to confirm that the shell script works correctly.<br><br>Let's learn how to use a '''loop''' with shell scripting. In this tutorial, we will only focus on one simple use with the '''for''' loop.<br><br>
 
# Use a text editor like vi or nano to create the text file called '''for-1.bash''' (eg. <span style="color:blue;font-weight:bold;font-family:courier;">vi for-1.bash</span>)<br><br>
 
# Enter the following lines in your shell script:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>echo<br>for x in 5 4 3 2 1<br>do<br>&nbsp;&nbsp;&nbsp;echo $x<br>done<br>echo "blast-off!"<br>echo</span><br><br>
 
# Save your editing session and exit the text editor (eg. with vi: press '''ESC''', then type ''':wx''' followed by '''ENTER''').<br><br>[[Image:for-1.png|thumb|right|125px|Output of a shell script using the '''for''' loop with a '''list'''.]]
 
# Issue the following Linux command to add execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x for-1.bash</span><br><br>
 
# Run your shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./for-1.bash</span><br><br>
 
# Use a text editor like vi or nano to create the text file called '''for-2.bash''' (eg. <span style="color:blue;font-weight:bold;font-family:courier;">vi for-2.bash</span>)<br><br>
 
# Enter the following lines in your shell script:<br><span style="font-family:courier;font-weight:bold;">#!/bin/bash<br>echo<br>for x<br>do<br>&nbsp;&nbsp;&nbsp;echo $x<br>done<br>echo "blast-off!"<br>echo</span><br><br>
 
# Save your editing session and exit the text editor (eg. with vi: press '''ESC''', then type ''':wx''' followed by '''ENTER''').<br><br>
 
# Issue the following Linux command to add execute permissions for your shell script:<br><span style="color:blue;font-weight:bold;font-family:courier;">chmod u+x for-2.bash</span><br><br>[[Image:for-2.png|thumb|right|175px|Output of a shell script using the '''for''' loop <u>without</u> a '''list'''.]]
 
# Run your shell script by issuing:<br><span style="color:blue;font-weight:bold;font-family:courier;">./for-2.bash 10 9 8 7 6 5 4 3 2 1</span><br><br>How does this differ from the previous shell script?<br><br>You will learn in a couple of weeks more examples of using loop statements.<br><br>Let's run a '''checking-script''' to confirm that both your '''for-1.bash''' and '''for-2.bash'''<br>Bash shell scripts exist, have execute permissions, and when run, produce<br>the same OUTPUT as required in this tutorial's instructions.<br><br>
 
# Issue the following Linux command to run a checking script:<br><span style="color:blue;font-weight:bold;font-family:courier;">bash /home/murray.saul/myscripts/week10-check-4 | more</span><br><br>If you encounter errors, make corrections and '''re-run''' the checking script until you<br>receive a congratulations message, then you can proceed.<br><br>
 
# After you complete the Review Questions sections to get additional practice, then work on your '''online assignment 3''',<br>'''sections 2 and 3''' labelled '''Interactive Shell Environment''' and '''Introduction To Scripting (phone)'''.<br><br>
 
  
= LINUX PRACTICE QUESTIONS =
+
'''Part B: Writing Linux Commands Using the sed Utility'''
  
The purpose of this section is to obtain '''extra practice''' to help with '''quizzes''', your '''midterm''', and your '''final exam'''.
+
Write a single Linux command to perform the specified tasks for each of the following questions.
 
 
Here is a link to the MS Word Document of ALL of the questions displayed below but with extra room to answer on the document to
 
simulate a quiz:
 
  
https://ict.senecacollege.ca/~murray.saul/uli101/uli101_week10_practice.docx
 
  
Your instructor may take-up these questions during class. It is up to the student to attend classes in order to obtain the answers to the following questions. Your instructor will NOT provide these answers in any other form (eg. e-mail, etc).
+
# Write a Linux sed command to display only lines 5 to 9 for the file: '''~murray.saul/uli101/stuff.txt'''<br><br>
 +
# Write a Linux sed command to display only lines the begin the pattern “and” for the file: '''~murray.saul/uli101/stuff.txt'''<br><br>
 +
# Write a Linux sed command to display only lines that end with a digit for the file: '''~murray.saul/uli101/stuff.txt'''<br><br>
 +
# Write a Linux sed command to save lines that match the pattern “line” (upper or lowercase) for the file: '''~murray.saul/uli101/stuff.txt''' and save results (overwriting previous contents) to: '''~/results.txt'''<br><br>
  
  
'''Review Questions:'''
+
'''Part C: Writing Linux Commands Using the awk Utility'''
  
 +
Note the contents from the following tab-delimited file called '''~murray.saul/uli101/stuff.txt''':
 +
(this file pathname exists for checking your work)
  
'''PART A: WRITE BASH SHELL SCRIPT CODE'''
+
<pre>
 +
Line one.
 +
This is the second line.
 +
This is the third.
 +
This is line four.
 +
Five.
 +
Line six follows
 +
Followed by 7
 +
Now line 8
 +
and line nine
 +
Finally, line 10
 +
</pre>
  
'''Write the answer to each question below the question in the space provided.'''
 
  
 +
'''Write the results of each of the following Linux commands for the above-mentioned file:'''
  
# Write a Bash shell script that clears the screen and displays the text Hello World on the screen.<br><br>What permissions are required to run this Bash shell script?<br><br>What are the different ways that you can run this Bash shell script from the command line?<br><br>
 
# Write a Bash shell script that clears the screen, prompts the user for their '''full name''' and then prompts the user for their '''age''',<br>then clears the screen again and welcomes the user by their name and tells them their age.<br><br>What comments would you add to the above script’s contents to properly document this Bash shell script to be understood<br>for those users that would read / edit this Bash shell script’s contents?<br><br>
 
# Write a Bash shell script that will first set the value of a variable called '''number''' to '''23''' and make this variable '''read-only'''.<br>Then the script will clear the screen and prompt the user to enter a value for that variable called number to another value.<br>Have the script display the value of the variable called number to prove that it is a read-only variable.<br><br>When you ran this Bash shell script, did you encounter an error message?<br>How would you run this Bash shell script, so the error message was NOT displayed?<br><br>
 
# Write a Bash shell script that will clear the screen and then display all arguments that were entered after your Bash shell script when it was run. Also have the Bash shell script display the number of arguments that were entered after your Bash shell script.<br><br><br>
 
  
'''PART B: WALK-THRUS'''
+
# <span style="font-family:courier;font-weight:bold">awk ‘NR == 3 {print}’ ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">awk ‘NR >= 2 && NR <= 5 {print}’ ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">awk ‘$1 ~ /This/ {print $2}’ ~murray.saul/uli101/stuff.txt</span><br><br>
 +
# <span style="font-family:courier;font-weight:bold">awk ‘$1 ~ /This/ {print $3,$2}’ ~murray.saul/uli101/stuff.txt</span><br><br>
  
'''Write the expected output from running each of the following Bash shell scripts You can assume that these Bash shell script files have execute permissions. Show your work.'''
 
  
:'''Walkthru #1:'''
+
'''Part D: Writing Linux Commands Using the awk Utility'''
  
:'''cat walkthru1.bash'''
 
<pre>
 
#!/usr/bin/bash
 
word1=”counter”
 
word2=”clockwise”
 
echo “The combined word is: $word2$word1”
 
</pre>
 
  
:WRITE OUTPUT FROM ISSUING:
+
Write a single Linux command to perform the specified tasks for each of the following questions.
:'''./walkthru1.bash'''
 
  
  
:'''Walkthru #2:'''
+
# Write a Linux awk command to display all records for the file: '''~/cars''' whose fifth field is greater than 10000.<br><br>
 +
# Write a Linux awk command to display the first and fourth fields for the file: '''~/cars''' whose fifth field begins with a number.<br><br>
 +
# Write a Linux awk command to display the second and third fields for the file: '''~/cars''' for records that match the pattern “chevy”.<br><br>
 +
# Write a Linux awk command to display the first and second fields for all the records contained in the file: '''~/cars'''<br><br>
  
:'''cat walkthru2.bash'''
 
<pre>
 
#!/usr/bin/bash
 
echo “result1: $1”
 
echo “result2: $2”
 
echo “result3: $3”
 
echo “result 4:”
 
echo “$*”
 
</pre>
 
  
:WRITE OUTPUT FROM ISSUING:
 
:'''./walkthru2.bash apple orange banana'''
 
<br><br>
 
  
  
 
[[Category:ULI101]]
 
[[Category:ULI101]]

Latest revision as of 07:17, 29 April 2022

USING SED & AWK UTILTIES


Main Objectives of this Practice Tutorial

  • Use the sed command to manipulate text contained in a file.
  • List and explain several addresses and instructions associated with the sed command.
  • Use the sed command as a filter with Linux pipeline commands.
  • Use the awk command to manipulate text contained in a file.
  • List and explain comparison operators, variables and actions associated with the awk command.
  • Use the awk command as a filter with Linux pipeline commands.



Tutorial Reference Material

Course Notes
Linux Command/Shortcut Reference
YouTube Videos
Slides:


Text Manipulation: Commands:


Brauer Instructional Videos:

KEY CONCEPTS

Using the sed Utility

Usage:

Syntax: sed [-n] 'address instruction' filename


How it Works:

  • The sed command reads all lines in the input file and will be exposed to the expression
    (i.e. area contained within quotes) one line at a time.
  • The expression can be within single quotes or double quotes.
  • The expression contains an address (match condition) and an instruction (operation).
  • If the line matches the address, then it will perform the instruction.
  • Lines will display be default unless the –n option is used to suppress default display


Address:

  • Can use a line number, to select a specific line (for example: 5)
  • Can specify a range of line numbers (for example: 5,7)
  • Regular expressions are contained within forward slashes (e.g. /regular-expression/)
  • Can specify a regular expression to select all lines that match a pattern (e.g /^[0-9].*[0-9]$/)
  • If NO address is present, the instruction will apply to ALL lines


Sed.png

Instruction:

  • Action to take for matched line(s)
  • Refer to table on right-side for list of some
    common instructions and their purpose



Using the awk Utility

Usage:

awk [-F] 'selection-criteria {action}’ file-name


How It Works:

  • The awk command reads all lines in the input file and will be exposed to the expression (contained within quotes) for processing.
  • The expression (contained in quotes) represents selection criteria, and action to execute contained within braces {}
  • if selection criteria is matched, then action (between braces) is executed.
  • The –F option can be used to specify the default field delimiter (separator) character
    eg. awk –F”;” (would indicate a semi-colon delimited input file).


Selection Criteria

  • You can use a regular expression, enclosed within slashes, as a pattern. For example: /pattern/
  • The ~ operator tests whether a field or variable matches a regular expression. For example: $1 ~ /^[0-9]/
  • The !~ operator tests for no match. For example: $2 !~ /line/
  • You can perform both numeric and string comparisons using relational operators ( > , >= , < , <= , == , != ).
  • You can combine any of the patterns using the Boolean operators || (OR) and && (AND).
  • You can use built-in variables (like NR or "record number" representing line number) with comparison operators.
    For example: NR >=1 && NR <= 5


Action (execution):

  • Action to be executed is contained within braces {}
  • The print command can be used to display text (fields).
  • You can use parameters which represent fields within records (lines) within the expression of the awk utility.
  • The parameter $0 represents all of the fields contained in the record (line).
  • The parameters $1, $2, $3$9 represent the first, second and third to the 9th fields contained within the record.
  • Parameters greater than nine requires the value of the parameter to be placed within braces (for example: ${10},${11},${12}, etc.)
  • You can use built-in variables (such as NR or "record number" representing line number)
    eg. {print NR,$0} (will print record number, then entire record).

INVESTIGATION 1: USING THE SED UTILITY

ATTENTION: Effective May 9, 2022 - this online tutorial will be required to be completed by Friday in week 11 by midnight
to obtain a grade of 2% towards this course


In this investigation, you will learn how to manipulate text using the sed utility.


Perform the Following Steps:

  1. Login to your matrix account and confirm you are located in your home directory.

  2. Issue a Linux command to create a directory called sed

  3. Issue a Linux command to change to the sed directory and confirm that you are located in the sed directory.

  4. Issue the following Linux command to download the data.txt file
    (copy and paste to save time):
    wget https://ict.senecacollege.ca/~murray.saul/uli101/data.txt

  5. Issue the more command to quickly view the contents of the data.txt file.
    When finished, exit the more command by pressing the letter q
    Issuing the p instruction without using the -n option (to suppress original output) will display lines twice.


    The p instruction with the sed command is used to
    print (i.e. display) the contents of a text file.

  6. Issue the following Linux command:
    sed 'p' data.txt

    NOTE: You should notice that each line appears twice.

    The reason why standard output appears twice is that the sed command
    (without the -n option) displays all lines regardless of an address used.

    We will use pipeline commands to both display stdout to the screen and save to files
    for confirmation of running these pipeline commands when run a checking-script later in this investigation.

  7. Issue the following Linux pipeline command:
    sed -n 'p' data.txt | tee sed-1.txt

    What do you notice? You should see only one line.

    You can specify an address to display lines using the sed utility
    (eg. line #, line #s or range of line #s).

  8. Issue the following Linux pipeline command:
    sed -n '1 p' data.txt | tee sed-2.txt

    You should see the first line of the text file displayed.
    What other command is used to only display the first line in a file?

    Using the sed command to display a range of lines.
  9. Issue the following Linux pipeline command:
    sed -n '2,5 p' data.txt | tee sed-3.txt

    What is displayed? How would you modify the sed command to display the line range 10 to 50?

    The s instruction is used to substitute text
    (a similar to method was demonstrated in the vi editor in tutorial 9).

  10. Issue the following Linux pipeline command:
    sed '2,5 s/TUTORIAL/LESSON/g' data.txt | tee sed-4.txt | more

    What do you notice? View the original contents of lines 2 to 5 in the data.txt file
    in another shell to confirm that the substitution occurred.

    Using the sed command with the -q option to display up to a line number, then quit.
    The q instruction terminates or quits the execution of the sed utility as soon as it is read in a particular line or matching pattern.

  11. Issue the following Linux pipeline command:
    sed '11 q' data.txt | tee sed-5.txt

    What did you notice? How many lines were displayed
    before the sed command exited?

    You can use regular expressions to select lines that match a pattern. In fact,
    the sed command was one of the first Linux commands that used regular expression.

    The rules remain the same for using regular expressions as demonstrated in tutorial 9
    except the regular expression must be contained within forward slashes
    (eg. /regexp/ ).

    Using the sed command using regular expressions with anchors.
  12. Issue the following Linux pipeline command:
    sed -n '/^The/ p' data.txt | tee sed-6.txt

    What do you notice?

  13. Issue the following Linux pipeline command:
    sed -n '/d$/ p' data.txt | tee sed-7.txt

    What do you notice?

    The sed utility can also be used as a filter to manipulate text that
    was generated from Linux commands.

    Using the sed command with pipeline commands.
  14. Issue the following Linux pipeline command:
    who | sed -n '/^[a-m]/ p' | tee sed-8.txt | more

    What did you notice?

  15. Issue the following Linux pipeline command:
    ls | sed -n '/txt$/ p' | tee sed-9.txt

    What did you notice?

  16. Issue the following to run a checking script:
    ~uli101/week11-check-1

    If you encounter errors, make corrections and re-run the checking script
    until you receive a congratulations message, then you can proceed.

In the next investigation, you will learn how to manipulate text using the awk utility.

INVESTIGATION 2: USING THE AWK UTILITY

In this investigation, you will learn how to use the awk utility to manipulate text and generate reports.

Perform the Following Steps:

  1. Change to your home directory and issue a command to confirm
    you are located in your home directory.

  2. Issue a Linux command to create a directory called awk

  3. Issue a Linux command to change to the awk directory and confirm you are located in the awk directory.

    Let's download a database file that contains information regarding classic cars.

  4. Issue the following linux command (copy and paste to save time):
    wget https://ict.senecacollege.ca/~murray.saul/uli101/cars.txt

  5. Issue the cat command to quickly view the contents of the cars.txt file.

    The "print" action (command) is the default action of awk to print
    all selected lines that match a pattern.

    This action (contained in braces) can provide more options
    such as printing specific fields of selected lines (or records) from a database.

    Using the awk command to display matches of the pattern ford.
  6. Issue the following linux command all to display all lines (i.e. records) in the cars.txt database that matches the pattern (or "make") called ford:
    awk '/ford/ {print}' cars.txt

    We will use pipeline commands to both display stdout to the screen and save to files for confirmation of running these pipeline commands when run a checking-script later in this investigation.

  7. Issue the following linux pipeline command all to display records
    in the cars.txt database that contain the pattern (i.e. make) ford:
    awk '/ford/' cars.txt | tee awk-1.txt

    What do you notice? You should notice ALL lines displayed without using search criteria.

    You can use builtin variables with the print command for further processing.
    We will discuss the following variables in this tutorial:

    Using the awk command to print search results by field number.
    $0 - Current record (entire line)
    $1 - First field in record
    $n - nth field in record
    NR - Record Number (order in database)
    NF - Number of fields in current record

    For a listing of more variables, please consult your course notes.

  8. Issue the following linux pipeline command to display the model, year, quantity and price
    in the cars.txt database for makes of chevy:
    awk '/chevy/ {print $2,$3,$4,$5}' cars.txt | tee awk-2.txt

    Notice that a space is the delimiter for the fields that appear as standard output.

    The tilde character ~ is used to search for a pattern or display standard output for a particular field.

  9. Issue the following linux pipeline command to display all plymouths (plym)
    by model name, price and quantity:
    awk '$1 ~ /plym/ {print $2,$3,$4,$5}' cars.txt | tee awk-3.txt

    You can also use comparison operators to specify conditions for processing with matched patterns
    when using the awk command. Since they are used WITHIN the awk expression,
    they are not confused with redirection symbols

    Using the awk command to display results based on comparison operators.
    <     Less than
    <=   Less than or equal
    >     Greater than
    >=   Greater than or equal
    ==   Equal
    !=    Not equal

  10. Issue the following linux pipeline command to display display the car make, model, quantity and price of all vehicles whose prices are less than $5,000:
    awk '$5 < 5000 {print $1,$2,$4,$5}' cars.txt | tee awk-4.txt

    What do you notice?

  11. Issue the following linux pipeline command to display display price,
    quantity, model and car make of vehicles whose prices are less than $5,000:
    awk '$5 < 5000 {print $5,$4,$2,$1}' cars.txt | tee awk-5.txt

  12. Issue the following linux pipeline command to display the car make,
    year and quantity of cars that begin with the letter 'f':
    awk '$1 ~ /^f/ {print $1,$2,$4}' cars.txt | tee awk-6.txt

    Using the awk command to display combined search results based on compound operators.
    Combined pattern searches can be made
    by using compound operator symbols:

    &&     (and)
    ||        (or)

  13. Issue the following linux pipeline command to list all fords
    whose price is greater than $10,000:
    awk '$1 ~ /ford/ && $5 > 10000 {print $0}' cars.txt | tee awk-7.txt

  14. Issue the following linux command (copy and paste to save time):
    wget https://ict.senecacollege.ca/~murray.saul/uli101/cars2.txt

  15. Issue the cat command to quickly view the contents of the cars2.txt file.

  16. Issue the following linux pipeline command to display the year
    and quantity of cars that begin with the letter 'f' for the cars2.txt database:
    awk '$1 ~ /^f/ {print $2,$4}' cars2.txt | tee awk-8.txt

    What did you notice?

    The problem is that the cars2.txt database separates each field by a semi-colon (;) instead of TAB.
    Therefore, it does not recognize the second and fourth fields.

    You need to issue awk with the -F option to indicate that this file's fields are separated (delimited) by a semi-colorn.

  17. Issue the following linux pipeline command to display the year
    and quantity of cars that begin with the letter 'f' for the cars2.txt database:
    awk -F";" '$1 ~ /^f/ {print $2,$4}' cars2.txt | tee awk-9.txt

    What did you notice this time?

  18. Issue the following to run a checking script:
    ~uli101/week11-check-2

    If you encounter errors, make corrections and re-run the checking script until you
    receive a congratulations message, then you can proceed.

LINUX PRACTICE QUESTIONS

The purpose of this section is to obtain extra practice to help with quizzes, your midterm, and your final exam.

Here is a link to the MS Word Document of ALL of the questions displayed below but with extra room to answer on the document to simulate a quiz:

https://ict.senecacollege.ca/~murray.saul/uli101/uli101_week11_practice.docx

Your instructor may take-up these questions during class. It is up to the student to attend classes in order to obtain the answers to the following questions. Your instructor will NOT provide these answers in any other form (eg. e-mail, etc).


Review Questions:

Part A: Display Results from Using the sed Utility

Note the contents from the following tab-delimited file called ~murray.saul/uli101/stuff.txt: (this file pathname exists for checking your work)

Line one.
This is the second line.
This is the third.
This is line four.
Five.
Line six follows
Followed by 7
Now line 8
and line nine
Finally, line 10


Write the results of each of the following Linux commands for the above-mentioned file:


  1. sed -n '3,6 p' ~murray.saul/uli101/stuff.txt

  2. sed '4 q' ~murray.saul/uli101/stuff.txt

  3. sed '/the/ d' ~murray.saul/uli101/stuff.txt

  4. sed 's/line/NUMBER/g' ~murray.saul/uli101/stuff.txt


Part B: Writing Linux Commands Using the sed Utility

Write a single Linux command to perform the specified tasks for each of the following questions.


  1. Write a Linux sed command to display only lines 5 to 9 for the file: ~murray.saul/uli101/stuff.txt

  2. Write a Linux sed command to display only lines the begin the pattern “and” for the file: ~murray.saul/uli101/stuff.txt

  3. Write a Linux sed command to display only lines that end with a digit for the file: ~murray.saul/uli101/stuff.txt

  4. Write a Linux sed command to save lines that match the pattern “line” (upper or lowercase) for the file: ~murray.saul/uli101/stuff.txt and save results (overwriting previous contents) to: ~/results.txt


Part C: Writing Linux Commands Using the awk Utility

Note the contents from the following tab-delimited file called ~murray.saul/uli101/stuff.txt: (this file pathname exists for checking your work)

Line one.
This is the second line.
This is the third.
This is line four.
Five.
Line six follows
Followed by 7
Now line 8
and line nine
Finally, line 10


Write the results of each of the following Linux commands for the above-mentioned file:


  1. awk ‘NR == 3 {print}’ ~murray.saul/uli101/stuff.txt

  2. awk ‘NR >= 2 && NR <= 5 {print}’ ~murray.saul/uli101/stuff.txt

  3. awk ‘$1 ~ /This/ {print $2}’ ~murray.saul/uli101/stuff.txt

  4. awk ‘$1 ~ /This/ {print $3,$2}’ ~murray.saul/uli101/stuff.txt


Part D: Writing Linux Commands Using the awk Utility


Write a single Linux command to perform the specified tasks for each of the following questions.


  1. Write a Linux awk command to display all records for the file: ~/cars whose fifth field is greater than 10000.

  2. Write a Linux awk command to display the first and fourth fields for the file: ~/cars whose fifth field begins with a number.

  3. Write a Linux awk command to display the second and third fields for the file: ~/cars for records that match the pattern “chevy”.

  4. Write a Linux awk command to display the first and second fields for all the records contained in the file: ~/cars