Difference between revisions of "RPM-based Kernels for Fedora ARM"

From CDOT Wiki
Jump to: navigation, search
(→‎Project Release 0.3)
 
(24 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
== Project Description ==
 
== Project Description ==
 
This project is related to making a RPM for kernels in Fedora ARM. Because of different
 
This project is related to making a RPM for kernels in Fedora ARM. Because of different
−
architecture and hardware compared to PCs, the way that ARM loads kernels,  
+
architecture and hardware compared to PCs, the way that ARM loads kernels and other boot
 +
processes is different than PCs. We are going to make a RPM that loads kernels, modules,
 +
init, and other boot process in ARM system in standard way like PCs (Finding an alternative way for GRUB) and try to bind these
 +
packages together.
 +
 
 
<!-- Description should be no longer than a paragraph.  Include links to any relevant on-line resources.  For example, [http://fedoraproject.org/wiki] or [http://developer.mozilla.org MDC]. -->
 
<!-- Description should be no longer than a paragraph.  Include links to any relevant on-line resources.  For example, [http://fedoraproject.org/wiki] or [http://developer.mozilla.org MDC]. -->
  
 
== Project Leader(s) ==
 
== Project Leader(s) ==
−
Chris Tyler
+
Chris Tyler, Fedora ARM List
 
<!-- Name(s) of primary people working on the project.  If you want to join a project as leader, discuss with other leaders first.  Include links to personal pages within wiki and to blog sites. -->
 
<!-- Name(s) of primary people working on the project.  If you want to join a project as leader, discuss with other leaders first.  Include links to personal pages within wiki and to blog sites. -->
  
 
== Project Contributor(s) ==
 
== Project Contributor(s) ==
−
[http://ktaraghi.blogspot.com/ Khosro Taraghi]
+
[[http://ktaraghi.blogspot.com/ Khosro Taraghi]]
 
<!-- Name(s) of people casually working on the project, or who have contributed significant help.  Include links to personal pages within wiki. Adding the names of your contributors here is a nice way to thank them.
 
<!-- Name(s) of people casually working on the project, or who have contributed significant help.  Include links to personal pages within wiki. Adding the names of your contributors here is a nice way to thank them.
  
Line 18: Line 22:
  
 
== Project Details ==
 
== Project Details ==
−
 
+
In PCs, when you turn on the machine, the system reads BIOS to locate the MBR which is the first 512 byte of hard disk. Then, the MBR says the location of GRUB and the
 +
GRUB program starts to load kernel. Finally, the kernel loads modules and init scripts to boot system up. In ARM system, because we do not have any BIOS or Hard disk, the
 +
process is different and it dose not have any GRUB. Instead, it has a Ramdisk or an image from file system that kernel loads that and boots from that. Now, we are going to make a package or RPM in case that we have several kernels installed in ARM and it should figure out to select the current kernel that it wants to load because it does not have any GRUB like PCs. So, this is the first approach for this project. Because we want to use initrd and modules which has a lot of features, we should build a kernel for a specific device which is impossible. Instead, we go to or load the generic kernel and the generic kernel can grab the module to know how to have access to hardware, but in order to do that, we should use a software such as Dracut to make the right module for a particular system. So, the Dracut is the second approach, and we should find a solution for working Dracut in ARM system.
 
<!-- Provides more depth than the Project Description.  This is the place for technical discussions, project specs, or other details.  If this gets very long, you might consider breaking this part into multiple pages and linking to them. -->
 
<!-- Provides more depth than the Project Description.  This is the place for technical discussions, project specs, or other details.  If this gets very long, you might consider breaking this part into multiple pages and linking to them. -->
  
Line 31: Line 37:
 
<!-- Note: each contributor is expected to have unique goals. These goals may be ''related'' to other students' work, but must be ''distinct'' and ''attainable'' regardless of the state of the other students' work. For example, under the umbrella of one project title, one student may work on packaging a piece of software and another may work on documentation, or one may work on solving one bug and another on solving another bug, but two students must not work on the same bug or depend on the other students' work in order to be able to complete their own project. -->
 
<!-- Note: each contributor is expected to have unique goals. These goals may be ''related'' to other students' work, but must be ''distinct'' and ''attainable'' regardless of the state of the other students' work. For example, under the umbrella of one project title, one student may work on packaging a piece of software and another may work on documentation, or one may work on solving one bug and another on solving another bug, but two students must not work on the same bug or depend on the other students' work in order to be able to complete their own project. -->
 
* 0.1
 
* 0.1
 +
      Find a solution for Dracut to work in ARM system
 +
Please see Project News and release 0.1.
 
* 0.2
 
* 0.2
 +
      Design Spec file for ARM Kernel and find an alternative way for GRUB in ARM system
 +
At this stage, I am trying to design a spec file for current kernel in my Fedora-ARM board since there is no any specific design in current rpm and spec file for kernel. This will merge to the main spec file in the kernel to include the ARM architecture for my ARM board. I should include my initramfs and current kernel to my spec file and find an alternative way to replace the GRUB since there is no any GRUB in ARM architecture. Although the hardware for this board doesn't change except adding hardware to the board such as RAID, which is good in designing iniramfs with dracut, different kinds of ARM board, for example, Beagleboard(OMAP3) or Panada boards and so on, make it hard and complicate in designing rpm kernel for ARM architecture.       
 
* 0.3
 
* 0.3
 +
      Bind together as a package, Documentation, and Presentation.
  
 
== Communication ==
 
== Communication ==
Line 38: Line 49:
 
=== Mailing Lists ===
 
=== Mailing Lists ===
 
<!-- Add any appropriate mailing lists to which you are subscribed (e.g., see http://lists.fedoraproject.org -->
 
<!-- Add any appropriate mailing lists to which you are subscribed (e.g., see http://lists.fedoraproject.org -->
−
 
+
* arm@lists.fedoraproject.org
 +
* devel@lists.fedoraproject.org
 
=== Upsteam Wiki and Web ===
 
=== Upsteam Wiki and Web ===
 
<!-- Links to upstream wiki/web pages -->
 
<!-- Links to upstream wiki/web pages -->
−
 
+
[http://fedoraproject.org/wiki/Features/Dracut Fedora Dracut wiki]
 
=== Links/Bugs/Tracking ===
 
=== Links/Bugs/Tracking ===
 
<!-- Add a link to any page(s) related to your work, including the bug numbers (on bugzilla or trac) -->
 
<!-- Add a link to any page(s) related to your work, including the bug numbers (on bugzilla or trac) -->
Line 61: Line 73:
 
== Project News ==
 
== Project News ==
  
 +
== '''Project Release 0.3''' ==
 +
I released my SBR600 project version 0.3. I tested my last package several times and it worked successfully. It was actually an extension of my project version 0.2. Not only I changed version 0.2 to works with any kernel, including the new kernels, but also I merged my package with primary kernel package. So, when the Arch is ARM, it installs my package (RPM-based kernel for ARM) and when the Arch is something else, it works as a regular kernel installation. In other words, I could create a RPM-based kernel for ARM which was my project. I built my package on both ARM and Primary architecture to make sure that it works.
 +
 +
This is the output of ll command before installing of last version of kernel in my ARM board:
 +
 +
[root@fedora-arm khosro]# ll /boot/
 +
 +
total 7824
 +
 +
drwxr-xr-x 2 root root    4096 Apr 14 2011 grub
 +
 +
-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs-2.6.32.img
 +
 +
-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs.img
 +
 +
-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage-2.6.32
 +
 +
-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage.bin
 +
 +
And here is the output of ll command after installing my package which shows the new files: (pay attention to link files):
 +
 +
[root@fedora-arm ~]# ll /boot/
 +
 +
total 11900
 +
 +
drwxr-xr-x 2 root root    4096 Apr 14 2011 grub
 +
 +
-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs-2.6.32.img
 +
 +
-rw-r--r-- 2 root root 2070985 Dec 31 1999 initramfs-2.6.35.img
 +
 +
-rw-r--r-- 2 root root 2070985 Dec 31 1999 initramfs.img
 +
 +
-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage-2.6.32
 +
 +
-rw-r--r-- 2 root root 2003236 Apr 21 2011 uImage-2.6.35
 +
 +
-rw-r--r-- 2 root root 2003236 Apr 21 2011 uImage.bin
 +
 +
The 2.6.35 is the last version of kernel up to this point that I wrote this blog.
 +
 +
Now, this is the output of booting my ARM board with new kernel (also, pay attention to “uname” command after logging to system):
 +
 +
:Booting kernel from Legacy Image at 80200000 ...
 +
 +
'''Image Name:  Linux-2.6.35
 +
 +
'''Image Type:  ARM Linux Kernel Image (uncompressed)''''''
 +
 +
Data Size:    2003172 Bytes =  1.9 MB
 +
 +
Load Address: 80008000
 +
 +
Entry Point:  80008000
 +
 +
Verifying Checksum ... OK
 +
 +
:Loading init Ramdisk from Legacy Image at 81600000 ...
 +
 +
'''Image Name:  boot initramfs
 +
 +
'''Image Type:  ARM Linux RAMDisk Image (gzip compressed)''''''
 +
 +
Data Size:    2631748 Bytes =  2.5 MB
 +
 +
Load Address: 81600000
 +
 +
Entry Point:  81600000
 +
 +
Verifying Checksum ... OK
 +
 +
Loading Kernel Image ... OK
 +
 +
OK
 +
 +
'''Starting kernel ...'''
 +
 +
Uncompressing Linux... done, booting the kernel.
 +
 +
'''Data Size: Linux version 2.6.35 (mockbuild@koji3.laptop.org) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #1 Thu Apr 21 14:40:04 EDT 2011'''
 +
 +
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
 +
 +
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
 +
 +
'''Machine: OMAP3 Beagle Board'''
 +
 +
Memory policy: ECC disabled, Data cache writeback
 +
 +
'''OMAP3430/3530''' ES3.1 (l2cache iva sgx neon isp )
 +
 +
SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
 +
 +
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
 +
 +
Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext2 eq rootdelay=1 nohz=off
 +
 +
PID hash table entries: 1024 (order: 0, 4096 bytes)
 +
 +
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
 +
 +
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
 +
 +
Memory: 128MB 128MB = 256MB total
 +
 +
Memory: 253360k/253360k available, 8784k reserved, 0K highmem
 +
 +
Virtual kernel memory layout:
 +
 +
vector  : 0xffff0000 - 0xffff1000  (  4 kB)
 +
 +
fixmap  : 0xfff00000 - 0xfffe0000  ( 896 kB)
 +
 +
DMA    : 0xffc00000 - 0xffe00000  (  2 MB)
 +
 +
vmalloc : 0xd0800000 - 0xf8000000  ( 632 MB)
 +
 +
lowmem  : 0xc0000000 - 0xd0000000  ( 256 MB)
 +
 +
modules : 0xbf000000 - 0xc0000000  (  16 MB)
 +
 +
.init : 0xc0008000 - 0xc0027000  ( 124 kB)
 +
 +
.text : 0xc0027000 - 0xc037d000  (3416 kB)
 +
 +
.data : 0xc0394000 - 0xc03c58c0  ( 199 kB)
 +
 +
Hierarchical RCU implementation.
 +
 +
Verbose stalled-CPUs detection is disabled.
 +
 +
NR_IRQS:402
 +
 +
Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
 +
 +
omap_hwmod: l3_hwmod: cannot be enabled (3)
 +
 +
omap_hwmod: l4_core_hwmod: cannot be enabled (3)
 +
 +
omap_hwmod: l4_per_hwmod: cannot be enabled (3)
 +
 +
omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
 +
 +
Reprogramming SDRC clock to 332000000 Hz
 +
 +
GPMC revision 5.0
 +
 +
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
 +
 +
Total of 96 interrupts on 1 active controller
 +
 +
OMAP GPIO hardware version 2.5
 +
 +
OMAP clockevent source: GPTIMER12 at 32768 Hz
 +
 +
Console: colour dummy device 80x30
 +
 +
Calibrating delay loop... 742.58 BogoMIPS (lpj=2899968)
 +
 +
pid_max: default: 32768 minimum: 301
 +
 +
Mount-cache hash table entries: 512
 +
 +
CPU: Testing write buffer coherency: ok
 +
 +
regulator: core version 0.5
 +
 +
NET: Registered protocol family 16
 +
 +
Found NAND on CS0
 +
 +
Registering NAND on CS0
 +
 +
Unable Setting up Logical Volume Management:  No volume groups found
 +
 +
[  OK  ]
 +
 +
Checking filesystems
 +
 +
Checking all file systems.
 +
 +
[/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/mmcblk0p2
 +
 +
/dev/mmcblk0p2: Superblock last mount time is in the future.
 +
 +
(by less than a day, probably due to the hardware clock being incorrectly set)  FIXED.
 +
 +
/dev/mmcblk0p2: Superblock last write time is in the future.
 +
 +
(by less than a day, probably due to the hardware clock being incorrectly set).  FIXED.
 +
 +
/dev/mmcblk0p2: clean, 46024/425152 files, 301506/1699840 blocks (check after next mount)
 +
 +
[  OK  ]
 +
 +
Remounting root filesystem in read-write mode:  [  OK  ]
 +
 +
Mounting local filesystems:  [  OK  ]
 +
 +
Enabling /etc/fstab swaps:  [  OK  ]
 +
 +
Entering non-interactive startup
 +
 +
FATAL: Module ipv6 not found.
 +
 +
Bringing up loopback interface:  [  OK ]
 +
 +
Bringing up interface eth0:  [ OK ]
 +
 +
FATAL: Module ipv6 not found.
 +
 +
Mounting other filesystems:  [  OK  ]
 +
 +
Retrigger failed udev events[  OK  ]
 +
 +
Starting sshd: [  OK  ]
 +
 +
'''Fedora release 13 (Goddard)'''
 +
 +
'''Kernel 2.6.35 on an armv7l (console)'''
 +
 +
fedora-arm login: root
 +
 +
Password:
 +
 +
Last login: Fri Dec 31 19:01:49 on console
 +
 +
[root@fedora-arm ~]# uname -a
 +
 +
'''Linux fedora-arm 2.6.35 #1 Thu Apr 21 14:40:04 EDT 2011 armv7l armv7l armv7l GNU/Linux'''
 +
 +
These are the all links for downloading packages and also more details and explanations about release 0.3:<br />
 +
 +
[http://ktaraghi.blogspot.com/2011/04/sbr600-project-release-03-how-my.html More details about release 0.3]<br />
 +
[http://matrix.senecac.on.ca/~ktaraghi/kernel.0.3.spec SPEC File]<br />
 +
[http://matrix.senecac.on.ca/~ktaraghi/linux-2.6.35-1.fc13.armv5tel.rpm Download Package]<br />
 +
[http://ktaraghi.blogspot.com/ My Blog Page]<br />
 +
 +
Best Regards,
 +
 +
Khosro Taraghi
 +
 +
== '''Project Release 0.2''' ==
 +
I released SBR600 project release 0.2. It is a rough package to install kernel and initramfs in a ARM board. It is almost close to end and I should change some parameters and hardcodes and then merge it to the original file such as kernel or grub, or even a separate package. You can find more details about release 0.2 in my weblog. Furthermore, you can download my spec, rpm, and srpm files from my weblog to further review. <br />
 +
These are the links:<br />
 +
[http://ktaraghi.blogspot.com/2011/04/rough-rpm-based-kernel-for-fedora-arm.html My blog page]<br />
 +
[http://matrix.senecac.on.ca/~ktaraghi rpm file]<br />
 +
[http://arm.koji.fedoraproject.org/koji/getfile?taskID=92730&name=linux-2.6.32-1.fc13.src.rpm srpm file]<br />
 +
[http://matrix.senecac.on.ca/~ktaraghi/kernel.spec spec file] <br />
 
<!-- This is where a permanent record of your releases and updates will go.  In these you should discuss the status or your work, your interactions with other members of the community (e.g., Seneca and Mozilla), problems you have encountered, etc. -->
 
<!-- This is where a permanent record of your releases and updates will go.  In these you should discuss the status or your work, your interactions with other members of the community (e.g., Seneca and Mozilla), problems you have encountered, etc. -->
 +
 +
== '''Project Release 0.1 Update''' ==
 +
Hello,
 +
After working on my project for the whole study week, I could figure out how to make initramfs with dracut for my Fedora-ARM board. After successfully booting and getting prompt for logging to Fedora 13 beta, I had trouble to install dracut on my ARM borad.Fortunately, I solved the problem and you can click on this link to get full details that I posted on my blob.[http://ktaraghi.blogspot.com/2011/03/installation-of-dracut-in-fedora-13-arm.html Installation of dracut in Fedora-ARM 13 Beta]After installing dracut, I had to compile the kernel in order to get modules for the ARM board which is a must for dracut to work properly. For full details and explanations, click on this link that I posted on my blog page:[http://ktaraghi.blogspot.com/2011/03/kernel-compilation-for-arm.html Kernel Compilation for ARM and Installation of Modules.] Finally, I could boot my ARM board up with initramfs that I made it with dracut. Here is the link to my initramfs for Fedora 13 beta so that you click on this link to download the initramfs file(uImage.ramdisk) [http://matrix.senecac.on.ca/~ktaraghi/ Download my initramfs]. This just work with OMAP3 family.And here is the output of the kernel before logging that shows booting system with dracut and initramfs:
 +
 +
:Booting kernel from Legacy Image at 80200000 ...
 +
: Image Name:  Linux-2.6.28-omap1
 +
: Image Type:  ARM Linux Kernel Image (uncompressed)
 +
: Data Size:    2577980 Bytes =  2.5 MB
 +
: Load Address: 80008000
 +
: Entry Point:  80008000
 +
: Verifying Checksum ... OK
 +
:'''Loading init Ramdisk from Legacy Image at 81600000 ...
 +
: Image Name:  boot initramfs
 +
: Image Type:  ARM Linux RAMDisk Image (gzip compressed)
 +
: Data Size:    2631748 Bytes =  2.5 MB
 +
: Load Address: 81600000
 +
: Entry Point:  81600000
 +
: Verifying Checksum ... OK
 +
: Loading Kernel Image ... OK
 +
: OK'''
 +
 +
: Starting kernel ...
 +
 +
: Uncompressing Linux..................................................................................................................................................................... done, booti.
 +
: Linux version 2.6.28-omap1 (root@tiioss) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #2 Thu Feb 19 12:45:34 IST 2009
 +
: CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f
 +
: CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
 +
: Machine: OMAP3 Beagle Board
 +
: .
 +
: .
 +
: .
 +
: .
 +
: mmc0: new high speed SDHC card at address 0007
 +
: mmcblk0: mmc0:0007 SD08G 7.48 GiB
 +
: mmcblk0: p1 p2
 +
: '''dracut: Mounted root filesystem /dev/mmcblk0p2'''
 +
: '''dracut: Switching root'''
 +
: Welcome to Fedora
 +
: Press 'I' to enter [  OK  ]
 +
: FATAL: Module ipv6 not found.
 +
: Mounting other filesystems:  [  OK  ]
 +
: Retrigger failed udev events[  OK  ]
 +
: Starting sshd: [  OK  ]
 +
 +
: Fedora release 13 (Goddard)
 +
: Kernel 2.6.28-omap1 on an armv7l (console)
 +
 +
: fedora-arm login:
 +
 +
== '''Project Release 0.1''' ==
 +
 +
'''Hello everybody,
 +
 +
I released version 0.1 of my SBR600 project. It is roughly close to what I expected. After several problems in booting system up, I could figure out how to boot the Fedora ARM system. The next step that I am working on that is "dracut". I am looking for a way to create an initial ramdisk image for preloading modules. This can be done by dracut command. After this step, it is the final step which is packaging(I hope).Now, let's see some of my testing result and my explanations on those test.
 +
 +
'''This shows my successful boot on Fedora-ARM:''''''
 +
 +
: VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
 +
: Console: switching to colour frame buffer device 80x30
 +
: clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000
 +
: clock: new_div = 9, new_rate = 48000000
 +
: twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
 +
: Waiting 1sec before mounting root device...
 +
: mmc0: new high speed SDHC card at address 0007
 +
: mmcblk0: mmc0:0007 SD08G 7.48 GiB
 +
: mmcblk0: p1 p2
 +
: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
 +
: VFS: Mounted root (ext2 filesystem).
 +
: Freeing init memory: 168K
 +
: Welcome to Fedora
 +
: Press 'I' to enter interactive startup.
 +
: Starting udev: udevd-work[652]: error opening ATTR{/sys/class/sound/controlC0/../uevent} for writing: No such file or directory
 +
 +
: [  OK  ]
 +
: Setting hostname fedora-arm:  [  OK  ]
 +
: Checking filesystems
 +
: Checking all file systems.
 +
: [/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/mmcblk0p2
 +
: /dev/mmcblk0p2 is mounted.
 +
 +
: WARNING!!!  Running e2fsck on a mounted filesystem may cause
 +
: SEVERE filesystem damage.
 +
 +
: Do you really want to continue (y/n)? no
 +
 +
: check aborted.
 +
: [  OK  ]
 +
: Mounting local filesystems:  [  OK  ]
 +
: Enabling /etc/fstab swaps:  [  OK  ]
 +
: Entering non-interactive startup
 +
: FATAL: Module ipv6 not found.
 +
: Bringing up loopback interface:  [  OK  ]
 +
: Bringing up interface eth0:  RTNETLINK answers: File exists
 +
: [  OK  ]
 +
: FATAL: Module ipv6 not found.
 +
: Starting system logger: [  OK  ]
 +
: Mounting other filesystems:  [  OK  ]
 +
: Retrigger failed udev events[  OK  ]
 +
: Starting sshd: [  OK  ]
 +
 +
: Fedora release 12 (Constantine)
 +
: Kernel 2.6.28-omap1 on an armv7l (console)
 +
 +
: fedora-arm login: root
 +
: Password:
 +
: Last login: Fri Dec 31 19:32:49 on console
 +
 +
'''This one shows my network configuration and successful connection to getway and Internet:'''
 +
 +
: [root@fedora-arm ~]# ifconfig
 +
: lo        Link encap:Local Loopback
 +
: inet addr:127.0.0.1  Mask:255.0.0.0
 +
: UP LOOPBACK RUNNING  MTU:16436  Metric:1
 +
: RX packets:2 errors:0 dropped:0 overruns:0 frame:0
 +
: TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
 +
: collisions:0 txqueuelen:0
 +
: RX bytes:168 (168.0 b)  TX bytes:168 (168.0 b)
 +
 +
: usb0      Link encap:Ethernet  HWaddr 1E:11:18:90:28:EF
 +
: inet addr:10.0.0.2  Bcast:10.255.255.255  Mask:255.0.0.0
 +
: UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 +
: RX packets:6 errors:0 dropped:0 overruns:0 frame:0
 +
: TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
 +
: collisions:0 txqueuelen:1000
 +
: RX bytes:1444 (1.4 KiB)  TX bytes:504 (504.0 b)
 +
 +
: [root@fedora-arm ~]# route -n
 +
: Kernel IP routing table
 +
: Destination    Gateway        Genmask        Flags Metric Ref    Use Iface
 +
: 169.254.0.0    0.0.0.0        255.255.0.0    U    1002  0        0 usb0
 +
: 10.0.0.0        0.0.0.0        255.0.0.0      U    0      0        0 usb0
 +
: 0.0.0.0        10.0.0.1        0.0.0.0        UG    0      0        0 usb0
 +
: [root@fedora-arm ~]# ping 10.0.0.1
 +
: PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
 +
: 64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=8.14 ms
 +
: 64 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=1.49 ms
 +
: 64 bytes from 10.0.0.1: icmp_seq=3 ttl=64 time=1.55 ms
 +
 +
'''And ping google.ca:'''
 +
 +
: [root@fedora-arm ~]# ping 74.125.225.16
 +
: PING 74.125.225.16 (74.125.225.16) 56(84) bytes of data.
 +
: 64 bytes from 74.125.225.16: icmp_seq=2 ttl=55 time=849 ms
 +
: 64 bytes from 74.125.225.16: icmp_seq=3 ttl=55 time=26.9 ms
 +
: 64 bytes from 74.125.225.16: icmp_seq=4 ttl=55 time=28.3 ms
 +
 +
'''Then I tried to update my Fedora-Arm system. It was successful too:'''
 +
 +
: root@fedora-arm ~]# yum update
 +
: fedora                                                  | 3.4 kB    00:00   
 +
: fedora/primary_db                                        | 7.5 MB    06:46   
 +
: updates                                                  |  951 B    00:00   
 +
: updates/primary                                          |  204 B    00:00   
 +
: Setting up Update Process
 +
: Resolving Dependencies
 +
: --> Running transaction check
 +
: ---> Package cpp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
 +
: ---> Package gcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
 +
: ---> Package libgcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
 +
: ---> Package libgomp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
 +
: ---> Package libstdc++.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
 +
: --> Finished Dependency Resolution
 +
 +
: Dependencies Resolved
 +
 +
: ================================================================================
 +
: Package          Arch            Version                  Repository    Size
 +
: ================================================================================
 +
: Updating:
 +
: cpp              armv5tel        4.4.2-5.fc12.fa4          fedora        3.1 M
 +
: gcc              armv5tel        4.4.2-5.fc12.fa4          fedora        6.1 M
 +
: libgcc          armv5tel        4.4.2-5.fc12.fa4          fedora        248 k
 +
: libgomp          armv5tel        4.4.2-5.fc12.fa4          fedora        89 k
 +
: libstdc++        armv5tel        4.4.2-5.fc12.fa4          fedora        234 k
 +
 +
: Transaction Summary
 +
: ================================================================================
 +
: Install      0 Package(s)
 +
: Upgrade      5 Package(s)
 +
 +
: Total download size: 9.8 M
 +
: Is this ok [y/N]: y
 +
: Downloading Packages:
 +
: (1/5): cpp-4.4.2-5.fc12.fa4.armv5tel.rpm                | 3.1 MB    03:58   
 +
: (2/5): gcc-4.4.2-5.fc12.fa4.armv5tel.rpm                | 6.1 MB    03:21   
 +
: (3/5): libgcc-4.4.2-5.fc12.fa4.armv5tel.rpm              | 248 kB    00:20   
 +
: (4/5): libgomp-4.4.2-5.fc12.fa4.armv5tel.rpm            |  89 kB    00:01   
 +
: (5/5): libstdc++-4.4.2-5.fc12.fa4.armv5tel.rpm          | 234 kB    00:43   
 +
: --------------------------------------------------------------------------------
 +
: Total                                            20 kB/s | 9.8 MB    08:31   
 +
: warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 35805f14
 +
: fedora/gpgkey                                            | 2.7 kB    00:00 ...
 +
: Importing GPG key 0x35805F14 "Fedora 12 ARM (Signing key for F-12 ARM) <fedora-arm@redhat.com>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-armv5tel
 +
: Is this ok [y/N]: y
 +
: Running rpm_check_debug
 +
: Running Transaction Test
 +
: Finished Transaction Test
 +
: Transaction Test Succeeded
 +
: Running Transaction
 +
: Updating      : libgcc-4.4.2-5.fc12.fa4.armv5tel                        1/10
 +
: Updating      : libgomp-4.4.2-5.fc12.fa4.armv5tel                      2/10
 +
: Updating      : libstdc++-4.4.2-5.fc12.fa4.armv5tel                    3/10
 +
: Updating      : cpp-4.4.2-5.fc12.fa4.armv [################          ]  4/10
 +
: Updating      : gcc-4.4.2-5.fc12.fa4.armv5tel                          5/10
 +
: Cleanup        : libstdc++-4.4.2-5.fc12.fa3.armv5tel                    6/10
 +
: Cleanup        : libgcc-4.4.2-5.fc12.fa3.armv5tel                        7/10
 +
: Cleanup        : cpp-4.4.2-5.fc12.fa3.armv5tel                          8/10
 +
: Cleanup        : libgomp-4.4.2-5.fc12.fa3.armv5tel                      9/10
 +
: Cleanup        : gcc-4.4.2-5.fc12.fa3.armv5tel                          10/10
 +
 +
: Updated:
 +
: cpp.armv5tel 0:4.4.2-5.fc12.fa4        gcc.armv5tel 0:4.4.2-5.fc12.fa4   
 +
: libgcc.armv5tel 0:4.4.2-5.fc12.fa4      libgomp.armv5tel 0:4.4.2-5.fc12.fa4
 +
: libstdc++.armv5tel
 +
 +
'''And finally, I used git for dracut since I couldn't install through yum command:'''
 +
 +
: racut@fedora-arm ~]# git clone git://dracut.git.sourceforge.net/gitroot/dracut/d
 +
: Initialized empty Git repository in /root/dracut/.git/
 +
: remote: Counting objects: 9670, done.
 +
: remote: Compressing objects: 100% (6208/6208), done.
 +
: remote: Total 9670 (delta 6805), reused 4965 (delta 3351)
 +
: Receiving objects: 100% (9670/9670), 1.23 MiB | 8 KiB/s, done.
 +
: Resolving deltas:  11% (754/6805)[root@fedora-arm ~]#
 +
: [root@fedora-arm ~]# ls
 +
: dracut
 +
: [root@fedora-arm ~]# cd dracut/
 +
: [root@fedora-arm dracut]# ls
 +
: AUTHORS        debian                  dracut.conf.d
 +
: COPYING        dracut                  dracut.kernel.7.xml
 +
: HACKING        dracut-catimages        dracut.png
 +
: Makefile        dracut-catimages.8.xml  dracut.spec
 +
: NEWS            dracut-functions        dracut.svg
 +
: PKGBUILD        dracut-gencmdline        dracut.xml
 +
: README          dracut-gencmdline.8.xml  lsinitrd
 +
: README.generic  dracut-update-initramfs  mkinitrd-dracut.sh
 +
: README.kernel  dracut.8.x

Latest revision as of 05:02, 22 April 2011

RPM-based Kernels for Fedora ARM

Project Description

This project is related to making a RPM for kernels in Fedora ARM. Because of different architecture and hardware compared to PCs, the way that ARM loads kernels and other boot processes is different than PCs. We are going to make a RPM that loads kernels, modules, init, and other boot process in ARM system in standard way like PCs (Finding an alternative way for GRUB) and try to bind these packages together.


Project Leader(s)

Chris Tyler, Fedora ARM List

Project Contributor(s)

[Khosro Taraghi]

Project Details

In PCs, when you turn on the machine, the system reads BIOS to locate the MBR which is the first 512 byte of hard disk. Then, the MBR says the location of GRUB and the GRUB program starts to load kernel. Finally, the kernel loads modules and init scripts to boot system up. In ARM system, because we do not have any BIOS or Hard disk, the process is different and it dose not have any GRUB. Instead, it has a Ramdisk or an image from file system that kernel loads that and boots from that. Now, we are going to make a package or RPM in case that we have several kernels installed in ARM and it should figure out to select the current kernel that it wants to load because it does not have any GRUB like PCs. So, this is the first approach for this project. Because we want to use initrd and modules which has a lot of features, we should build a kernel for a specific device which is impossible. Instead, we go to or load the generic kernel and the generic kernel can grab the module to know how to have access to hardware, but in order to do that, we should use a software such as Dracut to make the right module for a particular system. So, the Dracut is the second approach, and we should find a solution for working Dracut in ARM system.

Project Plan

Tracking mechanism (bugzilla, trac, github, ...):

Key contacts:

Goals for each release and plans for reaching those goals:

  • 0.1
     Find a solution for Dracut to work in ARM system

Please see Project News and release 0.1.

  • 0.2
     Design Spec file for ARM Kernel and find an alternative way for GRUB in ARM system

At this stage, I am trying to design a spec file for current kernel in my Fedora-ARM board since there is no any specific design in current rpm and spec file for kernel. This will merge to the main spec file in the kernel to include the ARM architecture for my ARM board. I should include my initramfs and current kernel to my spec file and find an alternative way to replace the GRUB since there is no any GRUB in ARM architecture. Although the hardware for this board doesn't change except adding hardware to the board such as RAID, which is good in designing iniramfs with dracut, different kinds of ARM board, for example, Beagleboard(OMAP3) or Panada boards and so on, make it hard and complicate in designing rpm kernel for ARM architecture.

  • 0.3
     Bind together as a package, Documentation, and Presentation.

Communication

Mailing Lists

  • arm@lists.fedoraproject.org
  • devel@lists.fedoraproject.org

Upsteam Wiki and Web

Fedora Dracut wiki

Links/Bugs/Tracking

Source Code Control

Blogs

Seneca Particpants

Non-Seneca Participants

Planets

Project News

Project Release 0.3

I released my SBR600 project version 0.3. I tested my last package several times and it worked successfully. It was actually an extension of my project version 0.2. Not only I changed version 0.2 to works with any kernel, including the new kernels, but also I merged my package with primary kernel package. So, when the Arch is ARM, it installs my package (RPM-based kernel for ARM) and when the Arch is something else, it works as a regular kernel installation. In other words, I could create a RPM-based kernel for ARM which was my project. I built my package on both ARM and Primary architecture to make sure that it works.

This is the output of ll command before installing of last version of kernel in my ARM board:

[root@fedora-arm khosro]# ll /boot/

total 7824

drwxr-xr-x 2 root root 4096 Apr 14 2011 grub

-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs-2.6.32.img

-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs.img

-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage-2.6.32

-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage.bin

And here is the output of ll command after installing my package which shows the new files: (pay attention to link files):

[root@fedora-arm ~]# ll /boot/

total 11900

drwxr-xr-x 2 root root 4096 Apr 14 2011 grub

-rw-r--r-- 1 root root 2071652 Apr 14 2011 initramfs-2.6.32.img

-rw-r--r-- 2 root root 2070985 Dec 31 1999 initramfs-2.6.35.img

-rw-r--r-- 2 root root 2070985 Dec 31 1999 initramfs.img

-rw-r--r-- 1 root root 1909048 Apr 14 2011 uImage-2.6.32

-rw-r--r-- 2 root root 2003236 Apr 21 2011 uImage-2.6.35

-rw-r--r-- 2 root root 2003236 Apr 21 2011 uImage.bin

The 2.6.35 is the last version of kernel up to this point that I wrote this blog.

Now, this is the output of booting my ARM board with new kernel (also, pay attention to “uname” command after logging to system):

Booting kernel from Legacy Image at 80200000 ...

Image Name: Linux-2.6.35

Image Type: ARM Linux Kernel Image (uncompressed)'

Data Size: 2003172 Bytes = 1.9 MB

Load Address: 80008000

Entry Point: 80008000

Verifying Checksum ... OK

Loading init Ramdisk from Legacy Image at 81600000 ...

Image Name: boot initramfs

Image Type: ARM Linux RAMDisk Image (gzip compressed)'

Data Size: 2631748 Bytes = 2.5 MB

Load Address: 81600000

Entry Point: 81600000

Verifying Checksum ... OK

Loading Kernel Image ... OK

OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Data Size: Linux version 2.6.35 (mockbuild@koji3.laptop.org) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #1 Thu Apr 21 14:40:04 EDT 2011

CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: OMAP3 Beagle Board

Memory policy: ECC disabled, Data cache writeback

OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )

SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024

Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootfstype=ext2 eq rootdelay=1 nohz=off

PID hash table entries: 1024 (order: 0, 4096 bytes)

Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

Memory: 128MB 128MB = 256MB total

Memory: 253360k/253360k available, 8784k reserved, 0K highmem

Virtual kernel memory layout:

vector  : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA  : 0xffc00000 - 0xffe00000 ( 2 MB)

vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)

lowmem  : 0xc0000000 - 0xd0000000 ( 256 MB)

modules : 0xbf000000 - 0xc0000000 ( 16 MB)

.init : 0xc0008000 - 0xc0027000 ( 124 kB)

.text : 0xc0027000 - 0xc037d000 (3416 kB)

.data : 0xc0394000 - 0xc03c58c0 ( 199 kB)

Hierarchical RCU implementation.

Verbose stalled-CPUs detection is disabled.

NR_IRQS:402

Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz

omap_hwmod: l3_hwmod: cannot be enabled (3)

omap_hwmod: l4_core_hwmod: cannot be enabled (3)

omap_hwmod: l4_per_hwmod: cannot be enabled (3)

omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)

Reprogramming SDRC clock to 332000000 Hz

GPMC revision 5.0

IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts

Total of 96 interrupts on 1 active controller

OMAP GPIO hardware version 2.5

OMAP clockevent source: GPTIMER12 at 32768 Hz

Console: colour dummy device 80x30

Calibrating delay loop... 742.58 BogoMIPS (lpj=2899968)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

regulator: core version 0.5

NET: Registered protocol family 16

Found NAND on CS0

Registering NAND on CS0

Unable Setting up Logical Volume Management: No volume groups found

[ OK ]

Checking filesystems

Checking all file systems.

[/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/mmcblk0p2

/dev/mmcblk0p2: Superblock last mount time is in the future.

(by less than a day, probably due to the hardware clock being incorrectly set) FIXED.

/dev/mmcblk0p2: Superblock last write time is in the future.

(by less than a day, probably due to the hardware clock being incorrectly set). FIXED.

/dev/mmcblk0p2: clean, 46024/425152 files, 301506/1699840 blocks (check after next mount)

[ OK ]

Remounting root filesystem in read-write mode: [ OK ]

Mounting local filesystems: [ OK ]

Enabling /etc/fstab swaps: [ OK ]

Entering non-interactive startup

FATAL: Module ipv6 not found.

Bringing up loopback interface: [ OK ]

Bringing up interface eth0: [ OK ]

FATAL: Module ipv6 not found.

Mounting other filesystems: [ OK ]

Retrigger failed udev events[ OK ]

Starting sshd: [ OK ]

Fedora release 13 (Goddard)

Kernel 2.6.35 on an armv7l (console)

fedora-arm login: root

Password:

Last login: Fri Dec 31 19:01:49 on console

[root@fedora-arm ~]# uname -a

Linux fedora-arm 2.6.35 #1 Thu Apr 21 14:40:04 EDT 2011 armv7l armv7l armv7l GNU/Linux

These are the all links for downloading packages and also more details and explanations about release 0.3:

More details about release 0.3
SPEC File
Download Package
My Blog Page

Best Regards,

Khosro Taraghi

Project Release 0.2

I released SBR600 project release 0.2. It is a rough package to install kernel and initramfs in a ARM board. It is almost close to end and I should change some parameters and hardcodes and then merge it to the original file such as kernel or grub, or even a separate package. You can find more details about release 0.2 in my weblog. Furthermore, you can download my spec, rpm, and srpm files from my weblog to further review.
These are the links:
My blog page
rpm file
srpm file
spec file

Project Release 0.1 Update

Hello, After working on my project for the whole study week, I could figure out how to make initramfs with dracut for my Fedora-ARM board. After successfully booting and getting prompt for logging to Fedora 13 beta, I had trouble to install dracut on my ARM borad.Fortunately, I solved the problem and you can click on this link to get full details that I posted on my blob.Installation of dracut in Fedora-ARM 13 BetaAfter installing dracut, I had to compile the kernel in order to get modules for the ARM board which is a must for dracut to work properly. For full details and explanations, click on this link that I posted on my blog page:Kernel Compilation for ARM and Installation of Modules. Finally, I could boot my ARM board up with initramfs that I made it with dracut. Here is the link to my initramfs for Fedora 13 beta so that you click on this link to download the initramfs file(uImage.ramdisk) Download my initramfs. This just work with OMAP3 family.And here is the output of the kernel before logging that shows booting system with dracut and initramfs:

Booting kernel from Legacy Image at 80200000 ...
Image Name: Linux-2.6.28-omap1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2577980 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: boot initramfs
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 2631748 Bytes = 2.5 MB
Load Address: 81600000
Entry Point: 81600000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux..................................................................................................................................................................... done, booti.
Linux version 2.6.28-omap1 (root@tiioss) (gcc version 4.2.1 (CodeSourcery Sourcery G++ Lite 2007q3-51)) #2 Thu Feb 19 12:45:34 IST 2009
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: OMAP3 Beagle Board
.
.
.
.
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD08G 7.48 GiB
mmcblk0: p1 p2
dracut: Mounted root filesystem /dev/mmcblk0p2
dracut: Switching root
Welcome to Fedora
Press 'I' to enter [ OK ]
FATAL: Module ipv6 not found.
Mounting other filesystems: [ OK ]
Retrigger failed udev events[ OK ]
Starting sshd: [ OK ]
Fedora release 13 (Goddard)
Kernel 2.6.28-omap1 on an armv7l (console)
fedora-arm login:

Project Release 0.1

Hello everybody,

I released version 0.1 of my SBR600 project. It is roughly close to what I expected. After several problems in booting system up, I could figure out how to boot the Fedora ARM system. The next step that I am working on that is "dracut". I am looking for a way to create an initial ramdisk image for preloading modules. This can be done by dracut command. After this step, it is the final step which is packaging(I hope).Now, let's see some of my testing result and my explanations on those test.

This shows my successful boot on Fedora-ARM:'

VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Console: switching to colour frame buffer device 80x30
clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000
clock: new_div = 9, new_rate = 48000000
twl4030_rtc twl4030_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
Waiting 1sec before mounting root device...
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD08G 7.48 GiB
mmcblk0: p1 p2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 168K
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: udevd-work[652]: error opening ATTR{/sys/class/sound/controlC0/../uevent} for writing: No such file or directory
[ OK ]
Setting hostname fedora-arm: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext2 (1) -- /] fsck.ext2 -a /dev/mmcblk0p2
/dev/mmcblk0p2 is mounted.
WARNING!!! Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.
Do you really want to continue (y/n)? no
check aborted.
[ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
FATAL: Module ipv6 not found.
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: RTNETLINK answers: File exists
[ OK ]
FATAL: Module ipv6 not found.
Starting system logger: [ OK ]
Mounting other filesystems: [ OK ]
Retrigger failed udev events[ OK ]
Starting sshd: [ OK ]
Fedora release 12 (Constantine)
Kernel 2.6.28-omap1 on an armv7l (console)
fedora-arm login: root
Password:
Last login: Fri Dec 31 19:32:49 on console

This one shows my network configuration and successful connection to getway and Internet:

[root@fedora-arm ~]# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:168 (168.0 b) TX bytes:168 (168.0 b)
usb0 Link encap:Ethernet HWaddr 1E:11:18:90:28:EF
inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1444 (1.4 KiB) TX bytes:504 (504.0 b)
[root@fedora-arm ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 usb0
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 usb0
0.0.0.0 10.0.0.1 0.0.0.0 UG 0 0 0 usb0
[root@fedora-arm ~]# ping 10.0.0.1
PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
64 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=8.14 ms
64 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=1.49 ms
64 bytes from 10.0.0.1: icmp_seq=3 ttl=64 time=1.55 ms

And ping google.ca:

[root@fedora-arm ~]# ping 74.125.225.16
PING 74.125.225.16 (74.125.225.16) 56(84) bytes of data.
64 bytes from 74.125.225.16: icmp_seq=2 ttl=55 time=849 ms
64 bytes from 74.125.225.16: icmp_seq=3 ttl=55 time=26.9 ms
64 bytes from 74.125.225.16: icmp_seq=4 ttl=55 time=28.3 ms

Then I tried to update my Fedora-Arm system. It was successful too:

root@fedora-arm ~]# yum update
fedora | 3.4 kB 00:00
fedora/primary_db | 7.5 MB 06:46
updates | 951 B 00:00
updates/primary | 204 B 00:00
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package cpp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
---> Package gcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
---> Package libgcc.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
---> Package libgomp.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
---> Package libstdc++.armv5tel 0:4.4.2-5.fc12.fa4 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Updating:
cpp armv5tel 4.4.2-5.fc12.fa4 fedora 3.1 M
gcc armv5tel 4.4.2-5.fc12.fa4 fedora 6.1 M
libgcc armv5tel 4.4.2-5.fc12.fa4 fedora 248 k
libgomp armv5tel 4.4.2-5.fc12.fa4 fedora 89 k
libstdc++ armv5tel 4.4.2-5.fc12.fa4 fedora 234 k
Transaction Summary
================================================================================
Install 0 Package(s)
Upgrade 5 Package(s)
Total download size: 9.8 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): cpp-4.4.2-5.fc12.fa4.armv5tel.rpm | 3.1 MB 03:58
(2/5): gcc-4.4.2-5.fc12.fa4.armv5tel.rpm | 6.1 MB 03:21
(3/5): libgcc-4.4.2-5.fc12.fa4.armv5tel.rpm | 248 kB 00:20
(4/5): libgomp-4.4.2-5.fc12.fa4.armv5tel.rpm | 89 kB 00:01
(5/5): libstdc++-4.4.2-5.fc12.fa4.armv5tel.rpm | 234 kB 00:43
--------------------------------------------------------------------------------
Total 20 kB/s | 9.8 MB 08:31
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 35805f14
fedora/gpgkey | 2.7 kB 00:00 ...
Importing GPG key 0x35805F14 "Fedora 12 ARM (Signing key for F-12 ARM) <fedora-arm@redhat.com>" from /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-armv5tel
Is this ok [y/N]: y
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Updating  : libgcc-4.4.2-5.fc12.fa4.armv5tel 1/10
Updating  : libgomp-4.4.2-5.fc12.fa4.armv5tel 2/10
Updating  : libstdc++-4.4.2-5.fc12.fa4.armv5tel 3/10
Updating  : cpp-4.4.2-5.fc12.fa4.armv [################ ] 4/10
Updating  : gcc-4.4.2-5.fc12.fa4.armv5tel 5/10
Cleanup  : libstdc++-4.4.2-5.fc12.fa3.armv5tel 6/10
Cleanup  : libgcc-4.4.2-5.fc12.fa3.armv5tel 7/10
Cleanup  : cpp-4.4.2-5.fc12.fa3.armv5tel 8/10
Cleanup  : libgomp-4.4.2-5.fc12.fa3.armv5tel 9/10
Cleanup  : gcc-4.4.2-5.fc12.fa3.armv5tel 10/10
Updated:
cpp.armv5tel 0:4.4.2-5.fc12.fa4 gcc.armv5tel 0:4.4.2-5.fc12.fa4
libgcc.armv5tel 0:4.4.2-5.fc12.fa4 libgomp.armv5tel 0:4.4.2-5.fc12.fa4
libstdc++.armv5tel

And finally, I used git for dracut since I couldn't install through yum command:

racut@fedora-arm ~]# git clone git://dracut.git.sourceforge.net/gitroot/dracut/d
Initialized empty Git repository in /root/dracut/.git/
remote: Counting objects: 9670, done.
remote: Compressing objects: 100% (6208/6208), done.
remote: Total 9670 (delta 6805), reused 4965 (delta 3351)
Receiving objects: 100% (9670/9670), 1.23 MiB | 8 KiB/s, done.
Resolving deltas: 11% (754/6805)[root@fedora-arm ~]#
[root@fedora-arm ~]# ls
dracut
[root@fedora-arm ~]# cd dracut/
[root@fedora-arm dracut]# ls
AUTHORS debian dracut.conf.d
COPYING dracut dracut.kernel.7.xml
HACKING dracut-catimages dracut.png
Makefile dracut-catimages.8.xml dracut.spec
NEWS dracut-functions dracut.svg
PKGBUILD dracut-gencmdline dracut.xml
README dracut-gencmdline.8.xml lsinitrd
README.generic dracut-update-initramfs mkinitrd-dracut.sh
README.kernel dracut.8.x
Retrieved from "https://wiki.cdot.senecapolytechnic.ca/w/index.php?title=RPM-based_Kernels_for_Fedora_ARM&oldid=63463"