: There are more than thirty network segments in the SPR500 OPS535 Virtual Lab, each network LAN segment should use the private network address space 192.168.x.0/24 for local traffic. VMs in each local LAN segment should be reachable via the gateway using with the IP address 172.1620.x.1 from other LAN segment in the lab. The value of x is also ranging from 1 to 3043.* On each VM in your LAN segment, add a route for each LAN segment in the lab. You may need to add a maximum of 29 42 routes in order to reach the other 29 42 LAN segments managed by your classmates. You <b>DO NOT</b> need a route to your own LAN segment. * Use the command "nmtui utility to add a static route add -net 192.168.x.0 netmask 255.255.255.0 gw 172.16.x.1" for each network x y that you want to reach. Replace x y with the actual value when running the route commandnmtui utility.* Use the "rip route -n" command or "netstat -rn" command to check your current kernel routing tableon your VM1.