1,576
edits
Changes
Created page with "= LAB PREPARATION = === Purpose / Objectives of Lab 7 === In this lab, you will learn how to create a very simple web application in Amazon Web Services to demonstrate a Plat..."
= LAB PREPARATION =
=== Purpose / Objectives of Lab 7 ===
In this lab, you will learn how to create a very simple web application in Amazon Web Services to demonstrate a Platform-as-a-Service deployment. We'll be using AWS Elastic Beanstalk for this lab. For more information about these technologies, refer to the Week 10 lecture and slides.
While you are working through this lab, it is highly recommended that you write down general notes and commands to help you remember how to do this lab. You may use your notes during tests, so fill it out accordingly!
If you encounter technical issues, please contact your professor via e-mail or in your section's Microsoft Teams group.
=== Minimum Requirements ===
Before beginning, you must have:
# Successfully completed [[OPS705_Lab_6 | Lab 6]]
# Watched the Week 6 video lecture
# Read through the Week 6 slides, and have them handy as a reference for concepts
# Your Seneca Azure login credentials
# Your linked mobile device for 2FA
= INVESTIGATION 1: Installing Wordpress =
In this investigation, you'll set up a Wordpress installation using AWS Elastic Beanstalk. This service takes care of all the infrastructure setup; all you need to worry about is the code platform, the code, and the database setup.
== Part 1: Creating a Wordpress Web App ==
To create your web app, perform the following steps:
# Log in to AWS Educate and navigate to the AWS Management Console.
# Search for ''Elastic Beanstalk'' and click.
# On the main page for Elastic Beanstalk, click on the big orange '''Create Application''' button.
# You are now in the ''Getting Started - Create a web app'' screen.
# For the application name, name it ''wordpress''.
# Under ''Platform'', select '''PHP'''. Leave the branch and version on their defaults.
# Under ''Application Code'', select '''Upload your code'''.
# Open a new browser tab, navigate to https://wordpress.org/download and download the latest .zip package.
# Back in the ''Getting Started - Create a web app'' screen, go to the ''Source code origin'' section.
# For the version label, use '''wordpress-5.5.3'''.
# Select '''Local file''.
# Click on ''Choose file''. A local filesystem navigation window pops up. Select the wordpress .zip file you downloaded in Step 8.
# At the bottom of the screen, click on the white ''Configure more options'' button.
# In the next screen, find the ''Software'' box and click the ''Edit'' button inside.
# In this new screen, scroll all the way to the top. In the ''Container Options'', in the ''Document root'' field, type: <code>/wordpress</code>
# Click on the ''Continue'' button at the bottom of the screen to apply and to go back to the ''Configure more options'' page.
# Scroll down to the ''Database'' box, and click ''Edit''.
# In the database options page, enter your username as '''admin''. Choose a '''complex and unique password''', and save that password in a file. It will appear in the clear occasionally, so make sure it's not reused from something else.
# If not already present, enter '''5''' in the ''Storage'' field.
# Keep all other defaults.
# Click ''Save'' at the bottom of the page.
# Back in the main page, find the ''Notifications'' box and click ''Edit'' to add your Seneca e-mail address.
# Back in the main page, click on the ''Create app'' button at the bottom of the page.
# Your new Wordpress application will now be created. This takes about 10 minutes. The log screen will update it's progress as it goes and let you know when it's complete.
== Part 2: Configuring the Wordpress Installation ==
# Once the web app has completed start up from Part 1, click on the ''Environments'' link.
# You'll have a single environment in the list, most likely named ''Wordpress-env''. Click the name.
# Here, you can see the basic status of the web app and associated information. You can also update the code running here if you'd like.
# In the left-hand menu, click on ''Configuration''.
# Near the bottom of this page, you'll see a section labelled ''Database''. Next to the ''endpoint'' field, a link will be present.
# Save this link in a text document, and then open this link in a new window.
# Welcome to the MySQL database you created with the web app. We're here to grab database connector information.
# Click on the ''Configuration'' tab link.
# At the very top, look for the ''DB name'' entry. Write this down in your text file.
# Your text document should now have four pieces of information: Database Host (endpoint), Database Name, Database Username, and Database Password
# Go back to your first window, the ''Wordpress-env'' status page. In the left-hand menu, click on the ''Go to environment'' link.
# This brings you to the Wordpress configuration webpage for your personal installation.
# Select ''English (United States)'', and then the blue ''Continue'' button.
# This page just reminds you to have the information from Step 10 handy. (Don't worry about ''Table prefix'', we'll be using the default.) Click ''Let's go!''.
# In the next page, enter the database information from your text file. Leave ''Table Prefix'' at its default.
# When ready, click ''Submit''.
# If your connector information is correct, you'll get a congratulations page. ("All right, sparky!"). Click ''Run the installation''. If you got an error page, go back and double-check your information.
# Now, we're in the blog settings page. Use the following settings:
# '''Site Title''': <code>Full Name's OPS705 Blog</code>
# '''Username''': <code>Seneca Username</code>
# '''Password''': Use the supplied password, or choose your own.
# '''Your Email''': <code>username@myseneca.ca</code>
# '''Search engine visibility''': Check the box.
# When ready, click the ''Install Wordpress'' button.
# Shortly, you'll see a ''Success!'' splash page confirming your username. Click the ''Log In'' button to login to your new blog.
== Part 3: Writing a Blog Entry ==
# Look around at the Dashboard and familarize yourself with the available settings.
# Create a blog post with the title <code>Post 1: Installing Wordpress Using AWS Elastic Beanstalk</code>.
# In the post itself, using your own words, describe how your opinion of the installation process and how it compares to other work you've done in this course (or outside this course). Write approximately 500 words. Grammar and spelling are unimportant, as long as I can understand what you're getting at.
== Part 4: A Note About Resource Usage ==
Web apps are a bit different when it comes to resource usage. They're essentially always on, and meant to be that way. This is where auto-scaling becomes important, but that's out of scope for this course. For now, leaving your new blog running is expected.
= Lab Submission =
Submit to Blackboard's ''Lab Submission'' section '''full-desktop screenshots''' (PNG/JPG) of the following:
# The Elastic Beanstalk Environment status page for ''Wordpress-env''.
# The Wordpress Dashboard.
# Your blog post.
In the text box for your submission on Blackboard, include the URL to your blog post.
Your professor will review your blog directly; the screenshots are a backup in case of catastrophic issues.
'''Labs aren't marked until screenshots have been submitted.'''
[[Category:OPS705]]
[[Category:OPS705 Labs]]
[[Category:Digital Classroom]]
[[Category:Fall 2020]]
=== Purpose / Objectives of Lab 7 ===
In this lab, you will learn how to create a very simple web application in Amazon Web Services to demonstrate a Platform-as-a-Service deployment. We'll be using AWS Elastic Beanstalk for this lab. For more information about these technologies, refer to the Week 10 lecture and slides.
While you are working through this lab, it is highly recommended that you write down general notes and commands to help you remember how to do this lab. You may use your notes during tests, so fill it out accordingly!
If you encounter technical issues, please contact your professor via e-mail or in your section's Microsoft Teams group.
=== Minimum Requirements ===
Before beginning, you must have:
# Successfully completed [[OPS705_Lab_6 | Lab 6]]
# Watched the Week 6 video lecture
# Read through the Week 6 slides, and have them handy as a reference for concepts
# Your Seneca Azure login credentials
# Your linked mobile device for 2FA
= INVESTIGATION 1: Installing Wordpress =
In this investigation, you'll set up a Wordpress installation using AWS Elastic Beanstalk. This service takes care of all the infrastructure setup; all you need to worry about is the code platform, the code, and the database setup.
== Part 1: Creating a Wordpress Web App ==
To create your web app, perform the following steps:
# Log in to AWS Educate and navigate to the AWS Management Console.
# Search for ''Elastic Beanstalk'' and click.
# On the main page for Elastic Beanstalk, click on the big orange '''Create Application''' button.
# You are now in the ''Getting Started - Create a web app'' screen.
# For the application name, name it ''wordpress''.
# Under ''Platform'', select '''PHP'''. Leave the branch and version on their defaults.
# Under ''Application Code'', select '''Upload your code'''.
# Open a new browser tab, navigate to https://wordpress.org/download and download the latest .zip package.
# Back in the ''Getting Started - Create a web app'' screen, go to the ''Source code origin'' section.
# For the version label, use '''wordpress-5.5.3'''.
# Select '''Local file''.
# Click on ''Choose file''. A local filesystem navigation window pops up. Select the wordpress .zip file you downloaded in Step 8.
# At the bottom of the screen, click on the white ''Configure more options'' button.
# In the next screen, find the ''Software'' box and click the ''Edit'' button inside.
# In this new screen, scroll all the way to the top. In the ''Container Options'', in the ''Document root'' field, type: <code>/wordpress</code>
# Click on the ''Continue'' button at the bottom of the screen to apply and to go back to the ''Configure more options'' page.
# Scroll down to the ''Database'' box, and click ''Edit''.
# In the database options page, enter your username as '''admin''. Choose a '''complex and unique password''', and save that password in a file. It will appear in the clear occasionally, so make sure it's not reused from something else.
# If not already present, enter '''5''' in the ''Storage'' field.
# Keep all other defaults.
# Click ''Save'' at the bottom of the page.
# Back in the main page, find the ''Notifications'' box and click ''Edit'' to add your Seneca e-mail address.
# Back in the main page, click on the ''Create app'' button at the bottom of the page.
# Your new Wordpress application will now be created. This takes about 10 minutes. The log screen will update it's progress as it goes and let you know when it's complete.
== Part 2: Configuring the Wordpress Installation ==
# Once the web app has completed start up from Part 1, click on the ''Environments'' link.
# You'll have a single environment in the list, most likely named ''Wordpress-env''. Click the name.
# Here, you can see the basic status of the web app and associated information. You can also update the code running here if you'd like.
# In the left-hand menu, click on ''Configuration''.
# Near the bottom of this page, you'll see a section labelled ''Database''. Next to the ''endpoint'' field, a link will be present.
# Save this link in a text document, and then open this link in a new window.
# Welcome to the MySQL database you created with the web app. We're here to grab database connector information.
# Click on the ''Configuration'' tab link.
# At the very top, look for the ''DB name'' entry. Write this down in your text file.
# Your text document should now have four pieces of information: Database Host (endpoint), Database Name, Database Username, and Database Password
# Go back to your first window, the ''Wordpress-env'' status page. In the left-hand menu, click on the ''Go to environment'' link.
# This brings you to the Wordpress configuration webpage for your personal installation.
# Select ''English (United States)'', and then the blue ''Continue'' button.
# This page just reminds you to have the information from Step 10 handy. (Don't worry about ''Table prefix'', we'll be using the default.) Click ''Let's go!''.
# In the next page, enter the database information from your text file. Leave ''Table Prefix'' at its default.
# When ready, click ''Submit''.
# If your connector information is correct, you'll get a congratulations page. ("All right, sparky!"). Click ''Run the installation''. If you got an error page, go back and double-check your information.
# Now, we're in the blog settings page. Use the following settings:
# '''Site Title''': <code>Full Name's OPS705 Blog</code>
# '''Username''': <code>Seneca Username</code>
# '''Password''': Use the supplied password, or choose your own.
# '''Your Email''': <code>username@myseneca.ca</code>
# '''Search engine visibility''': Check the box.
# When ready, click the ''Install Wordpress'' button.
# Shortly, you'll see a ''Success!'' splash page confirming your username. Click the ''Log In'' button to login to your new blog.
== Part 3: Writing a Blog Entry ==
# Look around at the Dashboard and familarize yourself with the available settings.
# Create a blog post with the title <code>Post 1: Installing Wordpress Using AWS Elastic Beanstalk</code>.
# In the post itself, using your own words, describe how your opinion of the installation process and how it compares to other work you've done in this course (or outside this course). Write approximately 500 words. Grammar and spelling are unimportant, as long as I can understand what you're getting at.
== Part 4: A Note About Resource Usage ==
Web apps are a bit different when it comes to resource usage. They're essentially always on, and meant to be that way. This is where auto-scaling becomes important, but that's out of scope for this course. For now, leaving your new blog running is expected.
= Lab Submission =
Submit to Blackboard's ''Lab Submission'' section '''full-desktop screenshots''' (PNG/JPG) of the following:
# The Elastic Beanstalk Environment status page for ''Wordpress-env''.
# The Wordpress Dashboard.
# Your blog post.
In the text box for your submission on Blackboard, include the URL to your blog post.
Your professor will review your blog directly; the screenshots are a backup in case of catastrophic issues.
'''Labs aren't marked until screenshots have been submitted.'''
[[Category:OPS705]]
[[Category:OPS705 Labs]]
[[Category:Digital Classroom]]
[[Category:Fall 2020]]
