Difference between revisions of "OPS335 Lab 7 2018"

From CDOT Wiki
Jump to: navigation, search
Line 1: Line 1:
 
[[Category:OPS335]][[Category:OPS335 Labs]]
 
[[Category:OPS335]][[Category:OPS335 Labs]]
 +
== OBJECTIVE & PREPARATION==
  
==OBJECTIVE & PREPARATION==
+
* Add a new user to your '''host''' with the same name as the one you created on '''vm3''' in lab 4b, but use a different password.
 
+
* Download and run the [http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/nfs.bash nfs.bash] script on each of your machines. This will make your '''host''' an nfs server sharing the home directories held there with the vms.  It will also make the vms automatically try to mount the home directories held on '''host''' into their own filesystem as soon as they boot.  reboot the VMs now and make sure this is working before continuing.
{{Admon/important|Prerequistites|This lab depends on changes made in several previous labs.  You must have successfully completed labs 3, 4a, 4b, and 5 in order to be able to do this lab.}}
+
* An NIS server is used to synchronize system files and other information between machines in an NIS domain.
 
+
* In this lab you will set your '''host''' as an NIS server and share user information (names, groups, and passwords) with your VM's.
Below is the same diagram that we referred to over the previous 2 email labs:
+
{{Admon/important|Prerequisites|Before you begin make sure all your machines are up to date.
 
+
Ensure both host and VM's have firewalls set up according to prior labs and all labs have been completed. }}
[[Image:Email-servers.png]]
 
 
 
Note the two globes in the above diagram. Those globes represent the Internet that your emails travel through in order to be received by an e-mail recipient. The '''smaller globe (the one your workstation is connected to) cannot be trusted to send mail messages unencrypted'''. The '''larger globe usually involves inter-ISP traffic, often through an internet trunk line, so it is also unencrypted, but it cannot be easily accessed by hackers, pen-testers, or evildoers'''.
 
 
 
There are '''two important general truths you need to understand about email encryption''':
 
 
 
:* '''Email (the way the vast majority of people use it) travels from SMTP server to SMTP server uncencrypted'''.
 
 
 
:: That means that nothing sent over email is <u>truly</u> secure. But attempting to continually intercept SMTP server to SMTP server traffic is difficult and expensive, not worth doing for the little bit of money most of us have in our bank account.
 
 
 
:* '''Email travelling over a LAN (especially Wifi, but any local network) is always encrypted'''.
 
 
 
:: If e-mail traffic on a LAN was not encrypted, it would be easy and inexpensive to intercept (in order to obtain your username and password). These days, unencrypted connections from your client to your SMTP/IMAP/POP3 server very rarely exist.
 
 
 
You see in our diagram that one of the SMTP connections is supposed to be encrypted (this is the one that would be "LAN" traffic) and the IMAP connection as well (this one is either LAN-like traffic or is connecting to localhost, which is a different scenario altogether).
 
 
 
We're going to secure the two connections that we left to be in plain text previously. Unfortunately encrypting things is rarely a straighforward process. Fortunately we have a whole week to spend on it.
 
  
 
=== Online Resources===
 
=== Online Resources===
* [https://en.wikipedia.org/wiki/Transport_Layer_Security TSL, SSL Definition]
 
* [https://www.e-rave.nl/create-a-self-signed-ssl-key-for-postfix Create a self signed SSL key for Postfix]
 
* [http://wiki2.dovecot.org/SSL/DovecotConfiguration Dovecot SSL configuration]
 
 
 
== INVESTIGATION 1: GENERATING A SELF-SIGNED CERTIFICATE ==
 
 
According to Wikipedia (https://en.wikipedia.org/wiki/Transport_Layer_Security), '''Transport Layer Security''' (TLS) and its predecessor, '''Secure Sockets Layer''' (SSL), both of which are frequently referred to as 'SSL', are cryptographic protocols designed to provide communications security over a computer network.
 
 
Normally (in production), you would need to pay a "certificate authority" to issue a '''certificate''' for you. That is essentially '''a "signed" public key''' that will tell strangers on the internet that your server is really yours (i.e. the certificate authority says so). There is an obvious problem with the previous statement but that is mainly how public key encryption works on the Internet today.
 
  
We will be generating our own public keys, mainly in order to avoid paying for a certificate. We will not have enough time to get into the details of what all the following commands do in this section. They are from [https://www.e-rave.nl/create-a-self-signed-ssl-key-for-postfix this blog post]. If you don't understand what the blog post refers to but would like to understand in more details, a good recommended book for interest, called Crypto by Steven Levy, provides a more in-depth discussion of encryption and security.
+
== INVESTIGATION 1: SETTING UP YOUR NIS SERVER ==
 +
*Install the NIS server and client onto your host.
 +
  yum install ypserv ypbind
 +
*Add the following line to the bottom of the file /etc/sysconfig/network
 +
  NISDOMAIN="<learn-id>.org"
 +
  YPSERV_ARGS="-p 783"
 +
*This should be enough to set the domain name, however there is currently a [https://www.centos.org/forums/viewtopic.php?t=47013 bug] in systemd that prevents this from working properly on its own.
 +
**You will also need to start and enable the rhel-domainname service.
 +
*Edit the file /etc/yp.conf and set up your domain:
 +
  domain <learn-id>.org server 127.0.0.1
 +
*Create the file /var/yp/securenets:
 +
  host 127.0.0.1
 +
  255.255.255.0  192.168.x.0
 +
*Enable and start the NIS (ypserv) service.
 +
systemctl start ypserv.service
 +
systemctl enable ypserv.service
 +
*Backup the configuration file for NIS databases
 +
  cp /var/yp/Makefile /var/yp/Makefile.orig
 +
* Verify that your servers (NFS, ypserv) are running correctly with the following command:
 +
  rpcinfo -p
 +
*At this step you should edit your firewalls to allow RPC and  NIS traffic through your firewall (Hint: check the output of rpcinfo -p or iptables traffic on the "lo" interface), but only if the traffic came from inside your virtual network.
 +
*The machine will essentially be communicating with its own NIS server when using the Makefile
 +
*Now change to directory /var/yp and run this command to build the information databases
 +
  make
 +
*Enable and start the NIS binding (ypbind) service.
 +
systemctl start ypbind.service
 +
*Use the following command to verify your NIS server is working - you should see your learnid password record.
 +
  ypcat passwd
 +
*Run 'ypcat passwd' again.
 +
*Note that the new user does not appear.  In order for the new user to show up you will need to recreate the map files- change directory to /var/yp and run the "make" command again.
  
The public key cryptography concepts in this lab are the same in a previous lab ([http://zenit.senecac.on.ca/wiki/index.php/OPS335_Lab_1#SSH_Keys Lab1: SSH]), although the terminology is slightly different.
 
  
A simple way to summarize the differences is:
+
== INVESTIGATION 2: CLIENT CONFIGURATION ==
:* The '''.key''' file is your private key.
 
:* The '''.crt''' file is your public key.
 
  
 +
*Log into both '''vm3''' as the new user.  Note how they require different passwords on different machines.
 +
*Log out, and log back in as '''root''' (or use your normal user and '''su''') to continue.
 +
*Install ypbind on your vm3.
 +
* You may wish to follow the logs on vm3.  In addition to your normal log in, ssh from the host to vm3 and get a continuous feed from the logs with:
 +
tail -f /var/log/messages
 +
*Edit /etc/yp.conf adding the following line:
 +
domain <learnid>.org server 192.168.x.1
 +
*Start the ypbind server with the command.
 +
systemctl start ypbind.service
 +
*Looking at your logs ensure that ypbind is registered with rpcbind, if it is unable your firewall may need to be adjusted.
 +
*Now when you run the following command:
 +
ypcat passwd
 +
*You should be able to see the users from the server.
 +
*If you added a mismatched user, you must update the map files on the server by running make again.
 +
*Edit the /etc/nsswitch.conf file (on the VM only) and change the following lines so they appear as below:
 +
passwd:    nis files
 +
shadow:    nis files
 +
group:      nis files
 +
*Save and exit the file.
 +
*Ensure ypbind will start at boot and restart the vm.
 +
*Note that a recent bug is making machines with ypbind running take extraodinarily long to shut down.
 +
*Log into vm3 as the new user. You should now be able to use the password stored on '''host'''.
 +
*Back on '''host''' change the password for the new user and rebuild the maps.  Try to log into '''vm3''' with the old password; it should now require the changed password.
  
=== Encrypting Postfix with Transport Layer Security (TLS) ===
+
== INVESTIGATION 3: ADDING THE OTHER VMS ==
 
+
*When you have successfully made this change on '''vm3''', repeat these steps so that '''vm1''' and '''vm2'['' will also use NIS for user identification from files located on '''host'''.
'''Perform the following steps:'''
+
**WarningWhen configuring the location of the NIS server to bind to, use the ip address instead of the hostnameWhen the machine is booting, you have no guarantee that '''named''' starts before '''ypbind'''.
 
 
#Let's start with the "sending" SMTP server we have on VM2. Run the following, replacing <u>andrewsmith.org</u> with '''<u>your</u> domain name''':
 
 
 
<source lang="bash">mkdir -p /root/postfix-keys /etc/ssl/{private,certs}
 
cd /root/postfix-keys
 
openssl genrsa -des3 -out vm2.andrewsmith.org.key 2048
 
chmod 600 vm2.andrewsmith.org.key
 
openssl req -new -key vm2.andrewsmith.org.key -out vm2.andrewsmith.org.csr
 
openssl x509 -req -days 365 -in vm2.andrewsmith.org.csr -signkey vm2.andrewsmith.org.key -out vm2.andrewsmith.org.crt
 
openssl rsa -in vm2.andrewsmith.org.key -out vm2.andrewsmith.org.key.nopass
 
mv vm2.andrewsmith.org.key.nopass vm2.andrewsmith.org.key
 
openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650
 
chmod 600 vm2.andrewsmith.org.key cakey.pem
 
cp vm2.andrewsmith.org.key cakey.pem /etc/ssl/private
 
cp vm2.andrewsmith.org.crt cacert.pem /etc/ssl/certs</source>
 
 
 
::'''NOTE:''' Those commands will create a certificate, a certificate signing request, a certificate authority, and sign your certificate with your certificate authority.<br>This would be the same as in the real world except there you would contact a real CA, here you're making up your own.
 
 
 
<ol><li value="2">Now, configure Postfix to use the generated certificate, by adding the following to your '''main.cf''' file:</li></ol>
 
 
 
<pre># Settings to enable secure SMTP using my self-signed certificate:
 
smtpd_tls_auth_only = no
 
smtpd_use_tls = yes
 
smtp_use_tls = yes
 
smtpd_tls_key_file = /etc/ssl/private/vm2.andrewsmith.org.key
 
smtpd_tls_cert_file = /etc/ssl/certs/vm2.andrewsmith.org.crt
 
smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem
 
tls_random_source = dev:/dev/urandom
 
smtpd_tls_loglevel = 1</pre>
 
 
 
=== Setting Up and Testing Encryption with Thunderbird ===
 
 
 
'''Perform the following steps:'''
 
 
 
#Currently your Thunderbird is set up to use '''vm2.yoursenecaid.org''' for an SMTP server, with <u>no</u> security. Change that to use '''STARTTLS''' instead (you can change it under '''account settings --> Outgoing Server''').
 
# We haven't set up any user authentication, just an encrypted channel;therefore, leave the '''authentication method''' at the value: '''none'''.
 
#When you try to send an email Thunderbird will warn you about the self-signed certificate. You obviously know it's your certificate so you can tell Thunderbird to trust it:
 
 
 
 
 
[[Image:SMTP-certificate-warning.png]]
 
 
 
 
 
::'''NOTE:''' Your message may look slightly different (This author, that created the diagram above, made a little mistake when generating the certificate).
 
 
 
<ol><li value="4">After you confirm that security exception, send another email to yourself and make sure you receive it.</li><li> Notice that from the user's point of view nothing is different. But if you were an evildoer trying to steal an identity (the difference is huge). Before it was trivial and now it's computationally prohibitive.</li></ol>
 
 
 
=== Encryption Dovecot with Secure Socket layer (SSL) ===
 
 
 
Now we will ensure that our '''Dovecot''' connection is secure, and enforce that policy. With SMTP, you will need to allow plain text connections since that is the only method to pass email from server-to-server. With IMAP, there is no server-to-server interaction, but rather only client-to-server interaction. The reason to have an unencrypted IMAP connection would be if your '''IMAP server''' and '''IMAP client''' were the <u>same</u> machine.
 
 
 
'''Perform the following steps:'''
 
 
 
# Let's start by generating a new certificate for Dovecot on your vm3 machine by issuing the following commands:
 
<source lang="bash">mkdir /etc/ssl/{private,certs}
 
openssl genrsa -des3 -out vm3.andrewsmith.org.key 2048
 
chmod 600 vm3.andrewsmith.org.key
 
openssl req -new -key vm3.andrewsmith.org.key -out vm3.andrewsmith.org.csr
 
openssl x509 -req -days 365 -in vm3.andrewsmith.org.csr -signkey vm3.andrewsmith.org.key -out vm3.andrewsmith.org.crt
 
openssl rsa -in vm3.andrewsmith.org.key -out vm3.andrewsmith.org.key.nopass
 
mv vm3.andrewsmith.org.key.nopass vm3.andrewsmith.org.key
 
openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650
 
chmod 600 vm3.andrewsmith.org.key cakey.pem
 
cp vm3.andrewsmith.org.key cakey.pem /etc/ssl/private
 
cp vm3.andrewsmith.org.crt cacert.pem /etc/ssl/certs</source>
 
 
 
::'''NOTE:''' This process is identical to what you've done for the vm2 certificate. In fact if your IMAP and SMTP servers are on the same machine you can share the certificate between them. In our case, they are not on the same machine.
 
 
 
<ol><li value="2">Next, we need to configure Dovecot to use this for encrypted connections and not allow any kind of plain text connections. Edit the '''10-auth.conf''', <u>and</u> '''10-ssl.conf''' files and change the following settings (notethese parameters already exist in those files, just find them and set them to the correct value):</li></ol>
 
 
 
<source lang="bash">ssl = required
 
ssl_cert = <path_to_your_crt_file
 
ssl_key = <path_to_your_key_file
 
disable_plaintext_auth = yes
 
</source>
 
 
 
 
 
<ol><li value="3">Now, we will disable normal imap connections, leaving only imaps (secured imap) allowed. Edit the '''10-master.conf''' file and set the port number in '''inet_listener imap''' to '''0'''.</li>
 
<li>Your key/certificate doesn't have a '''.pem''' extension but they are PEM-encoded files. You can confirm that using the '''file''' command. If you're interested, learning more about configuring Dovecot for SSL, refer to the following documentation: [http://wiki2.dovecot.org/SSL/DovecotConfiguration Dovecot SSL configuration].</li></ol>
 
 
 
=== Verifying that Mail Messages are Encrypted===
 
 
 
'''Perform the following steps:'''
 
 
 
#Use the '''ss''' command to confirm you're only listening on the '''imaps''' port, and not the plain imap port.
 
#Next, reconfigure your account settings in Thunderbird to use the '''SSL/TLS''' connection security with your IMAP server, leaving the password as '''Normal Password'''.
 
 
 
::'''NOTE:''' When you send your test email, you will get another warning because you're using a self-signed certificate on '''vm3'''.  Make certain to authorize the exception.
 
 
 
'''Record steps, commands, and your observations on this investigation in your OPS335 lab log-book'''
 
 
 
== INVESTIGATION 2: INSTALL, CONFIGURE &amp; RUN WEBMAIL APPLICATION (Roundcube Mail) ==
 
{|cellpadding="15" width="40%" align="right"
 
 
 
|- valign="top"
 
 
 
|width="10%" | [[Image:Roundcube.png|thumb|right|200px|'''Roundcube''' webmail application Logo<br>GPL,<br> https://commons.wikimedia.org/w/index.php?curid=1772791]]
 
 
 
|width="10%" |[[Image:roundcube-pic.png|thumb|right|300px|Screencapture of '''roundcube''' webmail application running in order to send and receive mail messages via a web-browser.]]
 
 
 
 
 
|}
 
 
 
In the investigation, we will simply install, configure and run the '''roundcube''' webmail application.
 
 
 
'''Perform the following steps on vm1:'''
 
 
 
*Perform a search on the roundcube application in order to access the website.
 
*Either Download the "zipped tarball" from their website from a direct link or use the wget command to download directly from a download link (This part may take some effort depending on the Sourceforge website).
 
*Extract the "zipped tarball" and rename the generated directory that contains download source code to: '''webmail'''.
 
::* Use the '''--no-same-owner''' option when extracting the tar achive to ensure that the files do not keep the original owner (who will not exist on your system).
 
*Change the ownership of the '''temp''' and '''logs''' directories so they belong to apache.
 
*This service needs to be able to write to several directories ('''temp''' and '''logs''') that SELinux prevents write access toIf you are in a section that has SELinux set to '''enforcing''', run the  
 
following commands to let it know that apache should be allowed to write to files in those directories.
 
<source lang="bash">
 
semanage fcontext -a -t httpd_log_t '/var/www/html/webmail/temp(/.*)?'
 
semanage fcontext -a -t httpd_log_t '/var/www/html/webmail/logs(/.*)?'
 
restorecon -v -R /var/www/html/webmail
 
</source>
 
::*If your machine does not have the semage command, use yum to install the policycoreutils-python package.
 
*In the directory now named "webmail", there will be a file named '''INSTALL''' which will walk you through the rest of the Roundcube installation.<br /><br />Some installation tips to consider:
 
 
 
::* Be careful about copying &amp; pasting the MySQL setup part: take time and pay attention to detail: do not try to "rush it".
 
::* You will need to install additional Apache modules including: '''php-xml''' and '''php-mbstring'''.
 
::* Don't forget to set the password in the roundcube configuration.
 
 
 
*Note that both of your IMAP and SMTP servers are on different machines (i.e. not on vm1). Therefore, you will need to set the following options for Roundcube:
 
 
 
::* '''$config['smtp_server']'''
 
::* '''$config['default_host']'''
 
::* '''$config['default_port']'''
 
 
 
:::'''NOTE:''' The last <u>two</u> entries above refer to your IMAP server
 
 
 
*You should be able to test the configuration in your Roundcube installer after completing Step 3.</li><li>Try to test if the roundcube webmail application is working by sending and receiving e-mail messages.*
 
  
 
{{Admon/important |Backup your VMs!|You MUST perform a '''full backup''' of ALL of your VMs whenever you complete your '''OPS335 labs''' or when working on your '''OPS335 assignments'''. You should be using the dump command, and you should use  the Bash shell script that you were adviced to create in order to backup all of your VMs.}}
 
{{Admon/important |Backup your VMs!|You MUST perform a '''full backup''' of ALL of your VMs whenever you complete your '''OPS335 labs''' or when working on your '''OPS335 assignments'''. You should be using the dump command, and you should use  the Bash shell script that you were adviced to create in order to backup all of your VMs.}}
  
'''Record steps, commands, and your observations on this investigation in your OPS335 lab log-book'''
+
==Completing the Lab==
 
+
You have now created an NIS server for your network and caused your other virtual machines to use it as a central repository for user information.
==COMPLETING THE LAB==
 
In completing this lab you have gained experience...
 
  
 
'''Depending on your professor you will either be asked to submit the lab in class, or online.  Follow the appropriate set of instructions below.'''
 
'''Depending on your professor you will either be asked to submit the lab in class, or online.  Follow the appropriate set of instructions below.'''
  
 
===Online Submission (Peter Callaghan's Classes only)===
 
===Online Submission (Peter Callaghan's Classes only)===
Follow the instructions for lab 8 on moodle.
+
Follow the instructions for lab 7 on moodle.
  
 
===In Class Submission===
 
===In Class Submission===
'''Arrange evidence (command output) for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:'''
+
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Download the labcheck7.bash checking bash shell script by issuing the command:<br><br>'''wget http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/labcheck7.bash'''<br><br>set execute permission and run the shell script on your '''c7host''' machine.  
 
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Thunderbird with a message sent and received using encrypted channels.
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>New Thunderbird server configuration for your account.
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Logs on vm2 and vm3 showing the message has been sent and received.
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Your webmail showing your inbox
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Your webmail sending an email out
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>You receiving that mail on an exernal account
 
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Download the labcheck8.bash checking bash shell script by issuing the command:<br><br>'''wget http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/labcheck8.bash'''<br><br>set execute permission and run the shell script on your '''c7host''' machine.  
 
 
::*For '''Peter's classes''', follow his Online Submission instructions in Moodle.
 
::*For '''Peter's classes''', follow his Online Submission instructions in Moodle.
 
::*For '''Murray's classes''', run command  (piping to the '''more''' command) and show output to instructor.
 
::*For '''Murray's classes''', run command  (piping to the '''more''' command) and show output to instructor.
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Completed Lab8 log-book notes.
+
::<span style="color:green;font-size:1.5em;">&#x2713;</span>Completed Lab7 log-book notes.
 
 
 
 
==EXPLORATION QUESTIONS==
 
  
#Briefly define the term '''TSL'''.
+
== EXPLORATION QUESTIONS ==
#Briefly define the term '''SSL'''.
+
#What is the purpose of the rpcinfo command?
#List the steps to setup Encryption for Postfix with TLS.
+
#Explain the purpose of the make command in the lab - what does it do?
#List the steps to setup Encryption for Dovecot with SSL.
+
#Explain the purpose of the /var/yp/securenets file.
#List the steps to setup Encryption for the Thunderbird application.
+
#What is the function of the portmapper service?
#Provide a brief description of the following terms as they relate to mail servers:
+
#What ports did you need to open on your firewall?
#*'''Open Relay'''
 
#*'''SPF'''
 
#*'''DKIM'''
 
# How does a webmail application differ from using another MUA like Thunderbird?
 
# List the additional Apache modules that are required in order to run the Roundcube web application?
 

Revision as of 08:54, 12 March 2017

OBJECTIVE & PREPARATION

  • Add a new user to your host with the same name as the one you created on vm3 in lab 4b, but use a different password.
  • Download and run the nfs.bash script on each of your machines. This will make your host an nfs server sharing the home directories held there with the vms. It will also make the vms automatically try to mount the home directories held on host into their own filesystem as soon as they boot. reboot the VMs now and make sure this is working before continuing.
  • An NIS server is used to synchronize system files and other information between machines in an NIS domain.
  • In this lab you will set your host as an NIS server and share user information (names, groups, and passwords) with your VM's.
Important.png
Prerequisites
Before you begin make sure all your machines are up to date. Ensure both host and VM's have firewalls set up according to prior labs and all labs have been completed.

Online Resources

INVESTIGATION 1: SETTING UP YOUR NIS SERVER

  • Install the NIS server and client onto your host.
 yum install ypserv ypbind
  • Add the following line to the bottom of the file /etc/sysconfig/network
 NISDOMAIN="<learn-id>.org"
 YPSERV_ARGS="-p 783"
  • This should be enough to set the domain name, however there is currently a bug in systemd that prevents this from working properly on its own.
    • You will also need to start and enable the rhel-domainname service.
  • Edit the file /etc/yp.conf and set up your domain:
 domain <learn-id>.org server 127.0.0.1
  • Create the file /var/yp/securenets:
 host 127.0.0.1
 255.255.255.0   192.168.x.0
  • Enable and start the NIS (ypserv) service.
systemctl start ypserv.service
systemctl enable ypserv.service
  • Backup the configuration file for NIS databases
 cp /var/yp/Makefile /var/yp/Makefile.orig
  • Verify that your servers (NFS, ypserv) are running correctly with the following command:
 rpcinfo -p
  • At this step you should edit your firewalls to allow RPC and NIS traffic through your firewall (Hint: check the output of rpcinfo -p or iptables traffic on the "lo" interface), but only if the traffic came from inside your virtual network.
  • The machine will essentially be communicating with its own NIS server when using the Makefile
  • Now change to directory /var/yp and run this command to build the information databases
 make
  • Enable and start the NIS binding (ypbind) service.
systemctl start ypbind.service
  • Use the following command to verify your NIS server is working - you should see your learnid password record.
 ypcat passwd
  • Run 'ypcat passwd' again.
  • Note that the new user does not appear. In order for the new user to show up you will need to recreate the map files- change directory to /var/yp and run the "make" command again.


INVESTIGATION 2: CLIENT CONFIGURATION

  • Log into both vm3 as the new user. Note how they require different passwords on different machines.
  • Log out, and log back in as root (or use your normal user and su) to continue.
  • Install ypbind on your vm3.
  • You may wish to follow the logs on vm3. In addition to your normal log in, ssh from the host to vm3 and get a continuous feed from the logs with:
tail -f /var/log/messages
  • Edit /etc/yp.conf adding the following line:
domain <learnid>.org server 192.168.x.1
  • Start the ypbind server with the command.
systemctl start ypbind.service
  • Looking at your logs ensure that ypbind is registered with rpcbind, if it is unable your firewall may need to be adjusted.
  • Now when you run the following command:
ypcat passwd
  • You should be able to see the users from the server.
  • If you added a mismatched user, you must update the map files on the server by running make again.
  • Edit the /etc/nsswitch.conf file (on the VM only) and change the following lines so they appear as below:
passwd:     nis files
shadow:     nis files
group:      nis files
  • Save and exit the file.
  • Ensure ypbind will start at boot and restart the vm.
  • Note that a recent bug is making machines with ypbind running take extraodinarily long to shut down.
  • Log into vm3 as the new user. You should now be able to use the password stored on host.
  • Back on host change the password for the new user and rebuild the maps. Try to log into vm3 with the old password; it should now require the changed password.

INVESTIGATION 3: ADDING THE OTHER VMS

  • When you have successfully made this change on vm3', repeat these steps so that vm1 and vm2'[ will also use NIS for user identification from files located on host.
    • Warning: When configuring the location of the NIS server to bind to, use the ip address instead of the hostname. When the machine is booting, you have no guarantee that named starts before ypbind.
Important.png
Backup your VMs!
You MUST perform a full backup of ALL of your VMs whenever you complete your OPS335 labs or when working on your OPS335 assignments. You should be using the dump command, and you should use the Bash shell script that you were adviced to create in order to backup all of your VMs.

Completing the Lab

You have now created an NIS server for your network and caused your other virtual machines to use it as a central repository for user information.

Depending on your professor you will either be asked to submit the lab in class, or online. Follow the appropriate set of instructions below.

Online Submission (Peter Callaghan's Classes only)

Follow the instructions for lab 7 on moodle.

In Class Submission

Download the labcheck7.bash checking bash shell script by issuing the command:

wget http://matrix.senecac.on.ca/~peter.callaghan/files/OPS335/labcheck7.bash

set execute permission and run the shell script on your c7host machine.
  • For Peter's classes, follow his Online Submission instructions in Moodle.
  • For Murray's classes, run command (piping to the more command) and show output to instructor.
Completed Lab7 log-book notes.

EXPLORATION QUESTIONS

  1. What is the purpose of the rpcinfo command?
  2. Explain the purpose of the make command in the lab - what does it do?
  3. Explain the purpose of the /var/yp/securenets file.
  4. What is the function of the portmapper service?
  5. What ports did you need to open on your firewall?