Move to your '''vm1''' machine in order to perform the following trouble-shooting task:<ol type="a"><li>Use the '''wget''' command to download and run the following shell script:<br>[ link shell script here ]http://matrix.senecac.on.ca/~murray.saul/ops335/break-network.bash<br><br></li><li>after you have run that shell script, restart your vm1 machine.</li><li>Use the commands taught in this lab to confirm if your network connection is broken.</li><li>Carefully check your configuration to see if there is a change to your settings</li><li>Try to temporarily connect to the Internet</li><li>Edit your network settings file to make the changes permanent</li><li>Test your connectivity (including after a reboot of your vm1.<br><br></li></ol>'''Note:''' You should be able to go through that troubleshooting process pretty quickly. Setting up the network in this course is never a primary task, but it's almost always a prerequisite for anything else we're going to do. You can't have a working web server (or any other kind of server) if you don't have a working network connection.