<ol><li value="2">Run the '''ifconfig''' command on your '''c7host''' machine. Check and record the IPADDR for your default (dhcp) network interface card (possibly eno1) and the virtual bridge.</li><li>Issue the '''ip''' command on your '''c7host''' machine to determine the IPADDR and GATEWAY information (refer to above chart). How are the result similar or different than the ifconfig command?</li><li>Issue the ifconfig command on your VMs. what happened?></li><li>Use the '''ip''' command for your VMs to list the IPADDR and GATEWAY information.</li><li>Refer to the man pages or refer to following article [http://www.tecmint.com/ip-command-examples/ 10 Useful ip Commands] to see how to issue the above commands to create a <u>temporary</u> connection to your existing network.</ol>