Difference between revisions of "OPS235 Lab 2 - Fedora17"

From CDOT Wiki
Jump to: navigation, search
 
(240 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 
[[Category:OPS235]][[Category:OPS235 Labs]]
 
[[Category:OPS235]][[Category:OPS235 Labs]]
[[Category:OPS235]]{{Draft}}
+
{{Admon/caution|THIS IS AN OLD VERSION OF THE LAB|'''This is an archived version. Do not use this in your OPS235 course.'''}}
{{Admon/important|The course schedule, labs, and links are subject to change.|Check with your professor for details and changes specific to your section.}}
+
 
=OPS235 Lab 2: Fedora 16 Installation Methods (on Virtual Machines)=
+
= Fedora 17 Installation Methods (on Virtual Machines: fedora1, fedora2, fedora3) =
  
 
== Introduction ==
 
== Introduction ==
Line 8: Line 8:
 
A '''virtual machine''' is a software simulation of a computer which can be used as though it were actual hardware. It's possible to run multiple virtual machines on one computer, reducing hardware requirements and introducing flexibility. Some common uses of virtualization include:
 
A '''virtual machine''' is a software simulation of a computer which can be used as though it were actual hardware. It's possible to run multiple virtual machines on one computer, reducing hardware requirements and introducing flexibility. Some common uses of virtualization include:
  
* '''Software testing''' -- Using multiple operating systems simultaneously on a single computer for testing and experimentation.
+
:* '''Software testing''' -- Using multiple operating systems simultaneously on a single computer for testing and experimentation.
* '''Network simulation''' -- Testing network services, protocols, and security scenarios with a small number of computers.
+
:* '''Network simulation''' -- Testing network services, protocols, and security scenarios with a small number of computers.
* '''Isolation''' -- Protecting multiple sets of data by storing them on multiple virtual machines. If one of the virtual machines is compromised, the data on other virtual machines is still protected.
+
:* '''Isolation''' -- Protecting multiple sets of data by storing them on multiple virtual machines. If one of the virtual machines is compromised, the data on other virtual machines is still protected.
* '''Server consolidation''' -- Reducing the number of physical servers in a network by moving physical machines to virtual machines. This saves hardware, administration, cooling, and electricity costs, and it can increase the utilization of hardware (by ensuring that the hardware is not under-loaded).
+
:* '''Server consolidation''' -- Reducing the number of physical servers in a network by moving physical machines to virtual machines. This saves hardware, administration, cooling, and electricity costs, and it can increase the utilization of hardware (by ensuring that the hardware is not under-loaded).
* '''Load-balancing and disaster recovery''' -- It is possible to migrate virtual machines between different physical machines, to ensure that a workload is balanced across multiple computers, to allow routine hardware maintenance and upgrading, and to compensate for hardware failure or other disasters.
+
:* '''Load-balancing and disaster recovery''' -- It is possible to migrate virtual machines between different physical machines, to ensure that a workload is balanced across multiple computers, to allow routine hardware maintenance and upgrading, and to compensate for hardware failure or other disasters.
 +
 
 +
{|cellpadding="8" width="100%"
 +
|- valign="top"
 +
|
 +
 
 +
'''In this lab, you will create three virtual machines'''. This also gives you an opportunity to experiment with different ways of installing Fedora. Later in this course you will install another operating system distribution in a virtual machine.
  
'''In this lab, you will create three virtual machines'''. This also gives you an opportunity to experiment with different ways of installing Fedora. Later in this course you will install another operating system distribution in a virtual machines.
 
  
You should already have both a Fedora installation DVD and a Fedora LIVE CD. In both cases, the boot media (which you used to load the installation software) and the installation source (where the software that got installed came from) were the same: your CD/DVD provides both. However, the Fedora (and most other Linux distributions) permits you to use any combination of boot media and installation media:
+
You should already have both a '''Fedora installation DVD''' and a '''Fedora LIVE CD'''.
  
* '''Boot Media:'''
 
** CD or DVD
 
** Hard disk
 
** USB flash drive
 
** Network boot
 
  
* '''Installation Source:'''
+
In both cases, the boot media (which you used to load the installation software) and the installation source (the software that got installed) were the same: your CD/DVD provides both. However, the Fedora (and most other Linux distributions) permits you to use any combination of boot media and installation media:
** CD or DVD
+
 
** Hard disk
+
|
** USB flash drive
+
{|border="1" cellpadding="3" width="100%"
** Network HTTP or NFS software repository
+
|-
 +
! Method
 +
! Boot Media
 +
! Install. Source
 +
|-
 +
! CD or DVD
 +
! ✓
 +
! ✓
 +
|-
 +
! Hard Disk
 +
! ✓
 +
! ✓
 +
|-
 +
! USB Flash Drive
 +
! ✓
 +
! ✓
 +
|-
 +
! Network (http/nfs repository)
 +
! ✓
 +
! ✓
 +
|-
 +
! PXE Network Boot
 +
! ✓
 +
! X
 +
|}
 +
 
 +
|}
  
 
== Objectives ==
 
== Objectives ==
Line 38: Line 64:
 
** Network Installation
 
** Network Installation
 
** Kickstart Installation
 
** Kickstart Installation
 +
* '''Understand the advantages and disadvantages of each type of installation, and be able to select the best installation method for a particular situation.'''
  
== Reference Material ==
 
  
'''Virtualization''':
+
== Required Materials (Bring to All Labs) ==
* <span style="background-color:yellow;font-weight:bold'">[http://docs.fedoraproject.org/virtualization-guide/f13/en-US/html/ Fedora Virtualization Guide]</span>
 
  
'''Installation Methods:'''
+
* Fedora 17 LIVE CD
* Live Image Installation
+
* Fedora 17 x86_64 Installation DVD
** [http://docs.fedoraproject.org/en-US/Fedora/16/html/Fedora_Live_Images/ Fedora 16 Live Image Guide]
+
* SATA Hard Disk (in removable disk tray)
** [http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Quick_Start_Guide/ Fedora 16 Installation Quick Start Guide]
+
* USB Memory Stick
* '''Network Installation:'''
+
* Lab Logbook
** [http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Guide/ Fedora 16 Installation Guide]
 
*** [http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Guide/ch-Preparing-x86.html#s1-steps-network-installs-x86/ Preparing for a Network Installation]
 
*** [http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Guide/ch-Preparing-x86.html#s1-steps-network-installs-x86 Performing a Network Installation]
 
* '''Kickstart Installation:'''
 
** [http://docs.fedoraproject.org/install-guide/f16/en-US/html/ Fedora 16 Installation Guide]
 
*** [http://docs.fedoraproject.org/install-guide/f16/en-US/html/sn-automating-installation.html Automating the Installation with Kickstart]
 
*** [http://docs.fedoraproject.org/install-guide/f16/en-US/html/ch-kickstart2.html Kickstart Installations]
 
*** [http://docs.fedoraproject.org/install-guide/f16/en-US/html/ch-redhat-config-kickstart.html Kickstart Configurator]
 
  
== Required Materials ==
 
  
* Removable disk pack with Fedora installed (see [[OPS235 Lab 2|Lab 2]]).
+
==Prerequisites==
* Fedora 16 x86_64 Live CD.
 
  
{{Admon/tip|Performing this Lab off the Seneca network|This lab uses servers which are on the Seneca network and which are not available from other locations (such as your home). If you attempt this lab from another location, adjust the belmont.senecac.on.ca URLs to point to another [http://mirrors.fedoraproject.org/publiclist Fedora mirror server] -- note that you may need to change the directory name as well as the server name. The installation of the '''fedora3''' virtual machine <u>must</u> be done at Seneca.}}
+
* Completion and Instructor "Sign-off" of Lab 1: [[OPS235 Lab 1]]
  
  
==Objectives==
+
==Linux Command Online Reference==
 +
Each Link below displays online manpages for each command (via [http://linuxmanpages.com/ http://linuxmanpages.com]):
 +
:* '''virsh''' (Refer to Fedora Virtualization Guide link in the "Resources on the Web" section)
 +
:* [http://linuxmanpages.com/man1/gzip.1.php gzip / gunzip]
  
#To perform a GNU/Linux installation using the Fedora 13 distribution
 
#To perform boot time customization and configuration
 
#To obtain network configuration from a DHCP server
 
#To secure the boot loader by adding password protection
 
#To investigate GRUB boot loader configuration
 
  
==Reference==
+
== Resources on the Web ==
* [http://linuxmanpages.com/ man pages]
+
{|cellpadding="8" width="100%"
** mount
+
|- valign="top"
** rpm
+
| '''Virtualization''':
** hostname
+
| '''Live Image Installation:'''
** uname
+
| '''Network Installation:'''
** ps
+
| '''Kickstart Installation:'''
** ifconfig
 
** netstat
 
** route
 
** nslookup
 
** wc
 
** grub
 
  
* Resources on the web
+
|- valign="top"
** [http://fedora.redhat.com/docs/release-notes/ Fedora Release Notes]
+
|
** [http://docs.fedoraproject.org/install-guide/ Fedora Installation Guide]
+
[http://docs.fedoraproject.org/virtualization-guide/f13/en-US/html/ Fedora Virtualization Guide]
** [http://www.gnu.org/software/grub/manual/html_node/Security.html#Security Protecting Grub]
+
|
** [http://opensource.sgi.com/LDP/HOWTO/Kernel-HOWTO/grubconf.html Grub Details and Sample Config]
+
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Fedora_Live_Images/ Fedora 17 Live Image Guide]
** [http://www.aspencrypt.com/crypto101_hash.html One-way Hash Function]
+
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Quick_Start_Guide/ Fedora 17 Installation Quick Start Guide]
** [http://www.dedoimedo.com/computers/grub.html GRUB Tutorial]
+
|
** [http://www.securitystats.com/tools/password.php Password Security]
+
[http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ Fedora 17 Installation Guide]
 +
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ch-Preparing-x86.html#s1-steps-network-installs-x86/ Preparing for a Network Installation]
 +
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ch-Preparing-x86.html#s1-steps-network-installs-x86 Performing a Network Installation]
 +
|
 +
[http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ Fedora 17 Installation Guide]
 +
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/sn-automating-installation.html Automating the Installation with Kickstart]
 +
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ch-kickstart2.html Kickstart Installations]
 +
* [http://docs.fedoraproject.org/en-US/Fedora/17/html/Installation_Guide/ch-redhat-config-kickstart.html Kickstart Configurator]
  
==Required Material==
+
|}
  
* Fedora 13 x_64 Installation DVD - You can burn this onto a DVD-R in the Open Lab
+
=Performing Lab 2=
* SATA Hard Disk (the same one used for Lab 1)
+
== Preparation ==
* USB Memory Stick (minimum 64M)
 
  
==Prerequisite==
+
{{Admon/tip|Performing this Lab off the Seneca network (eg. at home)|'''It is recommended to perform this lab in one of Seneca College's labs'''. This lab uses servers which are on the Seneca network and which are not available from other locations (such as your home). If you attempt this lab from another location, adjust the belmont.senecac.on.ca URLs to point to another [http://mirrors.fedoraproject.org/publiclist Fedora mirror server] -- note that you may need to change the directory name as well as the server name. The installation of the '''fedora3''' virtual machine <u>must</u> be done at Seneca.}}
  
* Completion of Lab 1
+
# '''Open a web-browser''', and open the '''OPS235 Lab #2 WIKI'''. '''<br /><br />NOTE:''' You need to enter your "MySeneca" username and password to obtain a "wired" Internet connection (otherwise, you will not be able to perform the "groupinstall" command in the next step). Remember to perform a "wired-connection" (logging in with your MySeneca username and password via a web-browser) every time you boot-up your host machine...<br /><br />
 +
# Install the Fedora virtualization software: <code>yum groupinstall "Virtualization"</code> or <code>pkcon install @virtualization</code>  The virtualization software installed is in three parts:
 +
:* '''A system service named ''libvirtd''''' that manages the VMs.
 +
:* '''Tools to manage virtualization''', including the <code>virt-manager</code> graphical tool and the <code>virsh</code> command-line tool.
 +
:* The actual '''virtual machines''' themselves.
 +
<ol>
 +
<li value="3">Start the virtualization service: <code>service libvirtd start</code></li>
 +
<li>The firewall configuration is altered by the addition of the virtualization software. Restart the firewall so that these changes become active: <code>service iptables restart</code></li>
 +
</ol>
  
 +
{{Admon/caution|Reboot your fedora host now|virt-manager may not work properly unless you reboot after installing the virtualization software.}}
  
 +
<ol>
 +
<li value="5">After rebooting your computer system, and logging back into your account, start the graphical tool by selecting the menu options '''Activities'''>'''Applications'''>'''System Tools'''>'''Virtual Machine Manager''' or by typing the command <code>virt-manager</code></li>
 +
</ol>
  
==Instructions==
+
{{Admon/important|Run virt-manager as a regular user|Running virt-manager as root may not work due to configuration issues.}}
  
# Insert and secure your SATA hard disk to the removable disk slot.
+
== Investigation 1: Installing from a Live Disc ==
# Power up the computer.
 
# Insert the Fedora 13 x86_64 Installation DVD into the DVD drive.
 
# Reboot the system.
 
  
===Investigation 1: How do you install Fedora?===
+
{{Admon/tip|Using an Image instead of a Live Disc|It is recommended that you perform this installation from your Fedora LIVE CD. As a matter of interest (for future reference), it is possible to install directly from the ISO file you used to burn your Live CD. There are many Internet tutorials that show the individual how to perform that task.}}
{{Admon/important | Logical Volume Management | Fedora uses a type of storage management called Logical Volume Management (LVM). In LVM, disk partitions are called Physical Volumes (PVs) and provide storage to a Volume Group (VG). This storage is then split into various Logical Volumes (LVs). The advantage to this scheme is that you can change LV size and you can add and remove PVs after installation. For example, you can add a new disk to your system and then increase the size of your existing filesystems using that extra disk space. ''Please be careful to enter all LVM information accurately, including the VG and LV names.'' We will investigate and manipulate LVM in future labs.}}
 
  
{{Admon/note | Installation Time | The installation process will take about 15 minutes to complete when using DVD. Click the Reboot button on the screen to reboot the system after the installation is complete. There is a post installation setup after boot.}}
+
==== Introduction ====
  
 +
In this investigation, you will install Fedora from your live disc, and observe the differences between this type of installation and the DVD installation previously performed.
  
# After booting from the Installation DVD, at the Welcome Screen choose "Install or upgrade an existing system" to launch the Graphical installation program and select the following options (you can use the media test to verify that your DVD burned correctly -- It will take some time -- otherwise, skip it):
+
==== VM Details ====
#* Language - English
 
#* Keyboard Configuration - U.S. English
 
#* Type of devices: Basic Storage Devices
 
#* There should only be one storage drive listed - select it
 
#* If you get a warning that the drive may need to be initialized, it is because your drive is new and contains no partitition table. Select "Re-Initialize"
 
#* Set your hostname to - f13host (one word, no space, all lowercase)
 
#* Root Password: enter a password of your own choosing. Pick one that is really, really hard to guess to protect your system. (Recommendation: use the first letter and all the punctuation from a favorite phrase or song verse. For example, "To be or not to be, that is the question!" could become the password "Tbontb,titq!").
 
#* Disk Partition Setup - Specify a Custom Layout, and then set up the installation with this configuration:
 
#** Find your existing 300MB partition (/dev/sda1). Edit this entry so that the mountpoint is /boot and is formatted as an ext3 filesystem.
 
#** Don't touch the other existing 300M partition (/dev/sda5).
 
#** Create 4 new LVM Physical Volumes that are 25000 MB in size. Set the File System Type to Physical Volume (LVM). Should be /dev/sda6 to /dev/sda9.
 
#** Create an LVM Volume Group. Set the Volume Group Name to '''vg_main''' and set the Physical Extent size to '''4MB'''.
 
#** Click on the Add button (within the "Make LVM Volume Group" window) to create a logical volume within that volume group:
 
#*** Mount point / (root), filesystem type ext4, logical volume name '''root''', size 90000MB.
 
#* Say yes to continue without a swap partition.
 
#* Say yes to format /dev/sda1.
 
#* Accept Boot Loader defaults.
 
#* Accept Graphical Desktop and repository defaults.
 
# Proceed with the installation. '''Note how long it takes to perform the installation.'''
 
# Reboot using the controls on the screen. When the system starts, it will ask you some final configuration questions.
 
#* Check the License Agreement. What license is used for the Fedora distribution? What activities do have restrictions and obligations?
 
#* Create a user account for yourself using the same name as your learn account.
 
#* Set date and time. Normally, you would want to enable Network Time Protocol, but since we will be experimenting with the networking turned off in later labs, leave it disabled.
 
#* Click on Do Not Send Hardware Profile.
 
#* Finish the post-installation customization, wait for the login screen to appear, and then login to your Learn account.
 
  
Answer the Investigation 1 question in your lab log book.
+
* '''Name:''' fedora1
 +
* '''Boot media:''' Fedora Live CD
 +
* '''Installation source:''' Fedora Live CD
 +
* '''Memory:''' 768MB
 +
* '''Disk space:''' 10GB
 +
* '''CPUs:''' 1
  
{{Admon/tip|Forcing the Resolution on the Projector|The podium computers in the lab rooms are connected to a video splitter. This splitter then connects to both the LCD screen on the podium and the projector at the front of the room. However, the splitter prevents the computer from successfully querying the LCD or screen to find the supported resolutions, and Fedora therefore selects a very low (safe) resolution. If you are using a podium system, you can force the native 1680x1050 resolution of the LCD display using [http://matrix.senecac.on.ca/~chris.tyler/fedora-scripts/1680x1050 this script].}}
+
==== Screen-Shot Thumbnail Reference ====
  
===Investigation 2: How many files packages and files are installed on the system?===
+
{{Admon/note|Virtual Machine Screen Shots Thumbnails|While performing the Virtual Machine setup, click on the thumbnails below to provide a '''"visual reference"''' while performing this section.
 +
}}
  
For the rest of the tasks in this lab, you must login to your system using your Learn account and execute all commands under your learn account. If you get a Permission Denied message when trying to execute a command, then switch to the superuser account by running the command su -  and type in the password for "root". Once the intended command is executed, type "exit" to exit from the superuser account and return to your regular Learn account.
+
{|cellpadding="8" width="100%"
  
Record the commands used and the output generated in each of the following steps:
+
|[[Image:Virt-manager1.png|thumb|125px| '''Virtual Machine Manager:''' Create a New Virtual Machine]]
 +
|[[Image:Virt-manager2.png|thumb|100px|'''Step 1 of 5:''' Create a New Virtual Machine ]]
 +
|[[Image:virtual-manager3.png|thumb|100px|'''Step 2 of 5:''' Create a New Virtual Machine ]]
 +
|[[Image:virtual-manager4.png|thumb|100px|'''Step 3 of 5:''' Create a New Virtual Machine ]]
 +
|[[Image:virtual-manager5.png|thumb|100px|'''Step 4 of 5:''' Create a New Virtual Machine ]]
 +
|[[Image:virtual-manager6.png|thumb|100px|'''Step 5 of 5:''' Create a New Virtual Machine ]]
 +
|}
 +
 
 +
==== Steps ====
 +
 
 +
# In the Virtual Machine Manger, click on the icon to ''Create a Virtual Machine'' in the upper-left corner: <br />(refer to '''Virtual Machine Manager''' thumbnail above).
 +
# A window will appear with the title ''New VM''. There are five steps to be completed; click Forward after each step:
 +
# '''Step 1 of 5:''' Enter the virtual machine (called '''fedora1''') name and select '''Local install media'''  (refer to ''Step 1 of 5'' thumbnail above).
 +
# '''Step 2 of 5:''' '''Insert the CDROM or DVD containing the Fedora Live Disc image. Wait a moment for the disc to be recognized''', then select '''Use CDROM or DVD''' as the install media. Set the ''OS type'' to '''Linux''' and the ''Version'' to '''Fedora 17''' (refer to ''Step 2 of 5'' thumbnail above).
 +
<!-- {{Admon/tip|Using an ISO image|Instead of using a physical CD or DVD, you can use an ISO image of a CD or DVD. The virtualization software will make this ISO image appear like an actual CD within the virtual machine. Because hard disks are faster then optical discs, this will work faster than an actual CD/DVD.}}{{Admon/note|Choosing the operating system type and version|The purpose of the ''OS type'' and ''Version'' fields is to fine-tune some of the virtual machine settings for best performance. The VM will work even if these are set incorrectly.}} -->
 +
# '''Step 3 of 5:''' Set the memory to '''768 MB''' and the number of CPUs to '''1''' (refer to ''Step 3 of 5'' thumbnail above).
 +
# '''Step 4 of 5:''' This next step creates a disk file that will be used to simulate the virtual machine's disk drive. Select a size of '''10 GB''' and checkmark the box labeled '''Allocate entire disk now''' (refer to ''Step 4 of 5'' thumbnail above).
 +
# '''Step 5 of 5:''' Review the options that you have selected. '''Make a note of the storage location.''' If anything needs to be changed, use the ''Back'' button to go back and edit it; otherwise, click '''Finish''' (refer to ''Step 5 of 5'' thumbnail above).
 +
 
 +
{{Admon/important|Removing and Recreating VMs|If for some reason the user wants to remove a Virtual Machine, they can right-click the VM, and select delete in the Virtual Machine Manager. It is recommended to '''"delete the image file" in the remove VM dialog box when removing and then recreating a VM'''. Note: If you fail to properly remove the VM image file, it may affect the hard disk size for the new VM (i.e. use the old smaller size. Make certain to remove that VM image file prior to recreating the VM.|'''}}
 +
 
 +
 
 +
{{Admon/note|Fedora LIVE CD Install Screen Shots Thumbnails|While performing the Fedora 17 LIVE CD install, click on the thumbnails below to provide a '''"visual reference"''' while performing this particular Fedora installation.
 +
}}
 +
 
 +
{|cellpadding="8" width="100%"
  
# To find all the mount points, enter the command: <code>mount</code>
+
|[[Image:fedoralive1.png|thumb|100px| The Virtual Machine will now start.]]
#* Study the output and record all the mount points in your log book.
+
|[[Image:failedtoload.png|thumb|140px| '''Ignore and close the "Failed To Load" dialog box'''. Search for the panel on the upper-left-hand side of the screen.]]
# The name of the installation log file is <code>/root/install.log</code> -- It is an ASCII file (how can you be sure?) and can be viewed with the <code>less</code> command.  
+
|[[Image:fedoralive2.png|thumb|140px|Login to the VM and double-click:<br /> '''Applications'''<br />>'''System Tools'''<br />>'''Install to Hard Disk'''.]]
# You can make use of this file to determine how many packages have been installed: complete the following command to count the number of packages listed in the installation log file:
+
|[[Image:selectstorage1.png|thumb|100px|Select '''Specialized Storage Devices''']]
#* <code>grep ________________ /root/install.log | wc -l</code>
+
|[[Image:selectstorage2.png|thumb|100px|Select '''Virtio Block Device'''.]]
# Using the <code>rpm</code> command: you can also use the following commands to list all the installed packages, and the total number of packages installed:
+
|[[Image:finishcdinstall.png|thumb|100px|You will get the ''Firstboot'' configuration questions during the boot process.]]
#* <code>rpm -q -a</code>
+
|}
#* <code>rpm -q -a | wc -l</code>
+
<ol>
#* <code>rpm -qa  | wc -l</code>
+
<li value="8">'''The virtual machine will now start'''. Select the default menu item labelled: '''Start Fedora 17'''. The virtual machine is running from the live disc at this point, and no software has been installed on the ''hard drive'' of the virtual machine.</li>
# The <code>-q</code> option means query, and the <code>-a</code> option means all (in other words, query all installed software packages). Did you get the same number of packages from the above two methods?
+
</ol>
# Some of the files on your system were installed with the software packages, and some were created by system activity (for example, by creating your Learn account and by logging in). If you know the package name (from the <code>install.log</code>), you can list all the files that were installed from the package by using the following command:
 
#* <code>rpm -q -l package_name</code>
 
# This combines the <code>-q</code> (query) option with the <code>-l</code> (list filenames) option.
 
# You can pipe the outupt through <code>wc -l</code> to count the number of lines:
 
#* <code>rpm -ql package_name| wc -l</code>
 
# Using what you learned in steps 3, 4, and 8, get a count of the total number of files installed by all of the software packages on your system.
 
# To find out the name that you have assigned to your Linux system, enter the command:  <code>hostname</code>
 
# To find out the kernel version of your GNU/Linux workstation and the date it was created, enter the command:  <code>uname -r</code>
 
# To find out all the system processes running on your GNU/Linux workstation, enter the command: <code>ps -ef</code>
 
# To capture the list of all the system processes to a file called <code>ps.lst</code>, enter the command: <code>ps -ef > ps.lst''</code>
 
# Copy the installation log file <code>/root/install.log</code> and the file ps.lst to a USB memory key, or scp to your matrix account as a backup.
 
  
{{Admon/tip |Updating Fedora|The Fedora 13 software is updated frequently to add features, fix bugs, and upgrade security. Perform a system update to get the latest versions of the packages installed in Fedora: Start the Firefox web browser, turn off popup window blocking (select ''Edit>Preferences'', then select the Content tab and uncheck the box to Block Popups), then login to SeneNET. Open a terminal and type <code>su</code> to start a shell as root. Enter the command <code>yum update</code> This will download and install all of the packages that have been updated since the installation DVD image was created.  If you complete this command at Seneca it should run quite fast as Seneca College hosts a Fedora Repository mirror (a copy of all of the current fedora packages, on a local web server).}}
+
<ol>
 +
<li value="9">Login to the VM and click: '''Applications'''>'''System Tools'''>'''Install to Hard Drive'''. The installation program, similar to the one used when installing Fedora in Lab 1, will appear. You will get a warning at one point during the installation process that the disk "May contain data" or "may need to be re-initialized" -- this is simply a warning that the virtual disk is completely blank, and it is safe to proceed with the installation.</li>
 +
</ol>
  
=== Investigation 3: What is a runlevel? ===
+
{{Admon/note|Virtual Machine Screen Size|The virtual machine screen size will change resolution as it switches from text to graphics mode. Use the VM menu option View>Resize to VM to resize the window to show the entire VM display. If this is larger than your screen size, use View>Scale Display>Always to scale the image so it fits on your screen.
 +
}}
 +
<ol>
 +
<li value="10">During the installation process, when prompted for a storage device, first select '''Specialized Storage Devices''', and then select the '''Virtio Block Device''' option.</li>
 +
<li>When prompted for the hostname, enter '''fedora1''', and when prompted for the timezone, select '''Toronto - Eastern Time Ontario''', and when asked about storage, select '''Use All Space'''. '''Use the default values for all other fields.''' Notice that the installer does not ask you what software should be installed; compare the installation time to the amount of time it took to do your Lab 2 installation. Record this information in the '''table contained in Investigation 4'''.</li>
 +
<li>When the installation is complete, click on the '''reboot''' button at the bottom right-hand corner of the screen.</li>
 +
</ol>
  
After the kernel boots, it starts a single program, called <code>init</code>. A running instance of a program is called a '''process''' -- the init process always has a process ID (PID) of 1. All other processes on the system are started by init, or they are started by processes started by init.
+
<ol>
 +
<li value="13">Start the VM from its disk image. This can be done graphically by selecting the Virual machine name, and then clicking on the '''Open''' button, and then click the '''play''' button when the next screen appears (or by selecting Virtual Machine>Run from the virtual machine menu). You will get the ''Firstboot'' configuration questions during the boot process (asking you to create a user, set the date and time, and optionally send the hardware profile to the Fedora Project). Create a user with the same name as your Matrix account.</li>
 +
<li>Login using the new user account.</li>
 +
</ol>
  
Most current Linux systems use some variation of the init system originally developed for Unix System V (called "sysvinit") or a newer version called "upstart".
+
{{Admon/note|Network / Service Considerations|Please perform the tasks below in order allow these Fedora systems to be able to communicate with each other. '''Failure to properly perform these operations can cause problems in future labs'''.|
 +
}}
  
These systems employ the concept of "runlevels" -- groups of software that can be selected, so that the system can be run in various modes. In Fedora systems, these runlevels are used:
+
<ol>
 +
<li value="15">Enable SSH access to your virtual machine with these commands (semi-colon allows commands to be run in sequence):<br /> <code>service sshd start; chkconfig sshd on</code></li>
 +
<li>Find out the IP address of your virtual machine: <code>ifconfig eth0</code> </li>
 +
<li>Enter the following command on your virtual machine to create a firewall exception to allow ssh traffic into the machine:<br />  <code>iptables -I INPUT -p tcp -s0/0 -d0/0 --dport 22 -j ACCEPT</code></li>
 +
<li>Confirm that you can ssh to your virtual machine from the host (your main Fedora installation): <code>ssh ''IPaddress''</code></li>
 +
</ol>
  
{|class="mediawiki" border="1"
+
{{Admon/tip|Switch to Virtual Machine Manager Window|If you are currently in a Virtual machine, but want to switch to the Virtual Machine Manager Window, simply click '''Activities'''> '''Select the Virtual Machine manager window'''.}}
!Runlevel
+
 
!Description
+
'''Answer the Investigation 1 observations / questions in your lab log book.'''
 +
 
 +
== Investigation 2: Installing from the Network ==
 +
 
 +
{{Admon/tip|Authenticate to the network|The rest of this lab uses network access.''' Be sure to authenticate to the network using your browser before proceeding'''.}}
 +
 
 +
=== Introduction ===
 +
 
 +
It is possible to install Fedora entirely from the network. In this investigation, you will install Fedora from a webserver on Seneca's LAN.
 +
 
 +
==== VM details ====
 +
 
 +
* '''Name:''' fedora2
 +
* '''Boot media:''' Network installation
 +
* '''Installation source:''' http://belmont.senecac.on.ca/fedora/releases/17/Fedora/x86_64/os/
 +
* '''Memory:''' 1024MB
 +
* '''Disk space:''' 20GB
 +
* '''CPUs:''' 1
 +
 
 +
==== Steps ====
 +
# Create the VM (called '''fedora2''') as you did with the ''fedora1'' virtual machine, except:
 +
#* In '''step 1 of 5''', set the installation type to '''Network Install (HTTP, FTP, or NFS)'''.
 +
#* In '''step 2 of 5''', provide the location of the software source by providing the URL http://belmont.senecac.on.ca/fedora/releases/17/Fedora/x86_64/os/
 +
#* In '''step 2 of 5''', set the ''OS Type'' to '''Linux''' and ''Version'' to '''Fedora 17'''.
 +
# Observe the boot process. How is it different from booting from an optical disc (CD/DVD)?
 +
# Start the installation process (make certain to use information in the ''VM Details'' section above).
 +
# When you get to the disk partitioning step, select '''Use All Space''' and enable the checkbox labelled '''Review and modify partition layout'''.If an dialog box displays a permissions problem, then click yes to proceed. On the next screen, change the logical volumes as follows:
 +
#* Reduce the size of the root LV to '''8000 MB'''.
 +
#* '''Add a logical volume with a size of 2000 MB and a mountpoint of /home''' (you can name it whatever you want, and use '''ext4''' as the file-system type).
 +
# On the software selection screen, select '''Graphical Desktop'''.
 +
# '''On the same screen, select the "Fedora 17 - x86_64" and the "Fedora 17 - x86_64 - Updates". Leave "Installation Repo" selected. ''DO NOT'' enable the "Test Updates" repository'''.
 +
# Complete the installation. Record the time taken to install, and compare this to the time taken by the previous installations.Record this information in the '''table contained in Investigation 4'''.
 +
 
 +
'''Answer the Investigation 2 observations / questions in your lab log book.'''
 +
 
 +
== Investigation 3: Installing from the Network using Kickstart ==
 +
 
 +
=== Introduction ===
 +
 
 +
When Fedora is installed using the techniques you have used so far, the user is asked a number of questions. In some situations, it is better to provide the answers to these questions in a file rather than answer them individually. This type of file is called a ''kickstart'' file.
 +
 
 +
In this investigation, a kickstart file is provided for you. You can also create or modify a kickstart file using a regular text editor or a graphical tool.
 +
 
 +
==== VM details ====
 +
 
 +
* '''Name:''' fedora3
 +
* '''Boot media:''' Network installation
 +
* '''Installation source:''' http://belmont.senecac.on.ca/fedora/releases/17/Fedora/x86_64/os/
 +
* '''Kickstart location:''' http://www.drivehq.com/file/df.aspx/shareID10606286/fileID1269952040/Fedora17-kickstart.cfg
 +
* '''Memory:''' 1024MB
 +
* '''Disk space:''' 15GB
 +
* '''CPUs:''' 1
 +
 
 +
==== Steps ====
 +
# Create the VM as you did with the ''fedora2'' virtual machine, specifying a network install as before, except:
 +
#* In step 2 of 5, after entering the URL for the installation source, click on the '''URL Options''' control.
 +
#* Enter the Kickstart URL: http://www.drivehq.com/file/df.aspx/shareID10606286/fileID1269952040/Fedora17-kickstart.cfg
 +
# Observe the installation. How is it different from booting from an optical disc (CD/DVD)?
 +
# Complete the installation. Record the time taken to install, and compare this to the time taken by the previous installations.
 +
# What happens when the installation is finished?
 +
# '''Take a look at the kickstart file (using the URL you entered) to <u>determine</u> the root password as well as the name and password for the first user account'''.
 +
# Boot the virtual machine and log in (use the user ID and password information from the previous step). Compare the experience to the first time you booted the other virtual machines.Record this information in the '''table contained in Investigation 4'''.
 +
 
 +
'''Answer the Investigation 3 observations / questions in your lab log book.'''
 +
 
 +
== Investigation 4: Updating and Comparing the VMs ==
 +
 
 +
# In each VM, run this command: <code>yum update</code>
 +
# Record the answers to these questions in your log book:
 +
#* How long did it take to run on each VM? How many packages were updated?
 +
#* Why does it take longer in some VMs than others?
 +
 
 +
Complete the following table (and transfer into your lab2 log-book notes):
 +
 
 +
{|border="1" width="100%" cellpadding="5"
 +
|-
 +
! ||f17host||fedora1||fedora2||fedora3
 +
|-
 +
|'''Installation Method'''||Installation Disc||Live Disc||Network Installation||Network Installation + Kickstart
 +
|-
 +
|'''Packages Installed'''|| || || ||
 +
|-
 +
|'''Updates Installed immediately after installation'''|| || || ||
 +
|-
 +
|'''Software could be selected during installation'''|| || || ||
 +
|-
 +
|'''Disk layout could be selected during installation'''|| || || ||
 
|-
 
|-
|0
+
|'''No questions asked during installation'''|| || || ||
|Halt (powers off the system)
 
 
|-
 
|-
|1
+
|'''Total installation time''' (after installation questions)|| || || ||
|Single-user maintenance mode, network not running, character-mode display
 
 
|-
 
|-
|2
+
|'''Amount of disk space used'''|| || || ||
|''Not normally used - originally meant: Multi-user mode, network not running, character-mode display''
 
 
|-
 
|-
|3
+
|'''Questions asked during first boot'''|| || || ||
|Multi-user mode, network running, character-mode display
 
 
|-
 
|-
|4
+
|'''Advantages of this type of installation'''|| || || ||
|''Not normally used''
 
 
|-
 
|-
|5
+
|'''Disadvantages of this type of installation'''|| || || ||
|Multi-user mode, network running, graphical user interface
 
 
|-
 
|-
|6
+
|'''This type of installation is recommended for...'''|| || || ||
|Reboot
 
 
|}
 
|}
  
{{Admon/note|Different runlevel systems|Various Linux distributions may use the runlevel numbers differently. For example, on some Debian/Ubuntu systems, the default (standard) runlevel is 2.}}
+
== Investigation 5: Managing Virtual Machines from the Command Line ==
  
In order to implement runlevels, init uses a configuration file and a number of script files:
+
{{Admon/note|Manage virtual machines from the host|The commands used to manage virtual machines must be executed on the host (your disk pack) and not inside a virtual machine.}}
  
* <code>/etc/inittab</code> is the configuration file, which sets the default runlevel.
+
# Start the ''fedora1'' virtual machine, and stop the ''fedora2'' and ''fedora3'' virtual machines.
* <code>/etc/rc.d/init.d</code> is a directory of scripts.
+
# Switch to the f19host machine, and open a shell terminal.
 +
# Enter these commands into your f19host machine and note the result:
 +
#* <code>'''virsh list'''</code>
 +
#* <code>'''virsh list --all'''</code>
 +
#* <code>'''virsh list --inactive'''</code>
 +
# Now, shut-down your fedora1 VM normally, and close the fedora1 VM window. Make certain NOT to close the Virtual Machine Manager main window.
 +
# Switch to your terminal and issue the command: <code>'''virsh start fedora1'''</code>
 +
# Check to see if your fedora1 VM is now running.
 +
# Switch to the terminal and issue<code>'''virsh list --all'''</code> and confirm the status of the fedora1 VM.
 +
# There are other commands that can be used (such as suspend, or shutdown). The "shutdown" command may not always work since it sends a request to "shutdown virtual machine gracefully", but may not always work. Why do you think it is useful to have commands to manipulate VMs?
  
In order to determine which of the startup scripts should be executed in each runlevel, the one directory per runlevel is created (<code>/etc/rc.d/rc'''X'''.d</code>, where '''X''' is the runlevel). This directory is filled with symbolic links to the startup scripts in <code>/etc/rc.d/init.d</code>
+
{{Admon/note|Virtual Machine Does not Shutdown from Command|If the Virtual machine fails to shutdown from the <code>virsh shutdown</code> command, then you can go to the '''Virtual Machine manager''' and  '''halt''' or '''shutdown''' within the VM itself, then you can click the '''PowerOff''' button in the VM window. You'll want to avoid a forced shutdown since those are equivalent to yanking the cord out of the wall on a physical machine!|}}
  
# To find out the value of the runlevel your GNU/Linux system goes into after boot, enter the command: <code>grep initdefault /etc/inittab</code>
 
# You should get a single line containing ":" as the field delimiter. The second field stores the value of the runlevel the init process will use after a reboot. Record the output in your log book.
 
# A list of processes that should be running at a given runlevel can be found in the directory <code>/etc/rc.d/rc'''X'''.d</code> where '''X''' is the runlevel. Do a directory listing of that directory and study what files are in there. Pay attention to the first three characters of each file name. They have special meaning to the system. Record your observation in your log book.
 
# Make a backup of the file /etc/inittab with the command:  <code>cp /etc/inittab /etc/inittab.original</code>
 
# Edit the file <code>/etc/inittab</code> and change the default runlevel to 3. Save the change and reboot your system.
 
# After the reboot, you should get a "Text Login Screen". Login with your Learn account and type startx at the command prompt. Describe what happens in your log book.
 
# Enter the command: <code>runlevel</code> -- this shows the previous and current runlevel. Record the values in your book.
 
  
 +
'''Answer the Investigation 5 observations / questions in your lab log book.'''
  
Answer the Investigation 3 question.
+
== Investigation 6: How do I backup a virtual machine? ==
  
=== Investigation 4: What is the network configuration? ===
+
{{Admon/important|Backing up VMs|There are two general processes in order to back up your images:<ol><li>'''Compressing your images''' (also recommended to backup up to external storage USB Key) using the '''gzip''' command.</li><li>'''Backup the VM xlm configuration file''' (preferably to USB key) using '''virsh''' shell command to add VM to virtual machine manager list (in the event that the HOST machine is "wiped" and re-installed, but VM images and xml configuration files have been backed up external storage).</li></ol><br />Taking the time to backup the image of the Operating System's file system allows the user to return to a '''"restoration point"''' using the '''gunzip''' command in case something bad occurs to the OS during a lab.<br />Failure to take the time to make and confirm backups can result in loss of lab work for the student!|}}
  
# To check the network configuration settings obtained from the DHCP server, run the following commands, describing the output in your log book:
+
# Shut down all of the virtual machines.
#* ifconfig
+
# Change to the directory <code>/var/lib/libvirt/images/</code>. Note the size of the files in this directory. What do these files contain?
#* route
+
# Make a compressed backup of the <code>fedora3.img</code> file to your home directory with this command: <code>'''gzip < fedora3.img > ~YourUserId/fedora3.img.backup.gz'''</code><br />('''Note: Make certain to use the redirection signs "<" and ">" properly in the command!''')
#* netstat -rn
+
{{Admon/caution| Make sure the backup is successful!|If there are any error messages, '''DO NOT''' proceed past this point. You're going to destroy your fedora3 virtual machine and restore it using the backup you have created -- if there are any problems with the backup, you will not have a working virtual machine, and will have to re-install it.}}
#* nslookup (at the > prompt, enter the word "server" (do not type the quotes) and record the output. Type exit to leave nslookup).
+
<ol>
# Find the following information in the output of the above commands:
+
<li value="4">Compare the size of the compressed and original files.</li>
#* MAC address (physical or hardware address) of the ethernet network interface
+
<li>Start the '''''fedora3''''' VM.</li>
#* The IP address (logical address) assigned by the DHCP server
+
<li>'''Make certain that you are in your fedora VM and <u>not</u> in your Fedora main system!'''</li>
#* The default route (gateway)
+
<li>Wreck <u>only</u> your fedora 3 system! Try this command inside the fedora3 virtual machine: <code>'''rm -rf /*'''</code></li>
#* The DNS nameserver
+
<li>Shut down the VM. If you tried to start the Fedora3 VM, it would not boot since all system files have been removed!</li>
 
+
<li>Restore the original image from the backup in your home directory by typing this command: <code>'''gunzip < ~YourUserId/fedora3.img.backup.gz > fedora3.img'''</code></li>
Answer the Investigation 4 question.
+
<li>Restart the VM. Is it working normally?</li>
 
+
  <li>Create compressed backups of your other virtual machines.</li>
=== Investigation 5: How do You Secure the Grub Boot Loader? ===
+
</ol>
 
+
<ol>
{{Admon/caution|Duplicate UUIDs|Before proceeding, use the <code>mount</code> command to check to see which filesystem is mounted on the mount point <code>/boot</code>. If it is <code>/dev/sda5</code>, it is the wrong filesystem. This may be caused by a duplication of serial numbers which is the result of Lab 1; you can fix this problem with this series of commands:
+
<li value="12">You should make a copy of the xml configuration file in case you "wipe" and re-install the host machine, and want to add a restored VM backups to the virtual machine manager list. We will demonstrate using the fedora 3 xml configuration file, and prove that a "clone" can be added to your list.Please perform the following step:<ol type="a">
mkdir /media/sda5 /tmp/sda5-files
+
<li>Verify that you are in the directory: <code>/var/lib/libvirt/images/</code>.</li>
  umount /dev/sda5
+
  <li>Execute the following command: <code>virsh dumpxml fedora3 >fedora3.xml</code></li>
  mount /dev/sda5 /media/sda5
+
  <li>Examine the file <code>fedora3.xml</code>. What does it contain? What format is it in?</li>
  cp -v -R /media/sda5/* /tmp/sda5-files
+
<li>Make a copy of <code>fedora3.xml</code> called <code>fedora3a.xml</code>.</li>
  umount /dev/sda5
+
  <li>Edit the file <code>fedora3a.xml</code>, making the following changes:</li>
  mkfs -t ext3 /dev/sda5
+
</ol>
  mount /dev/sda5 /media/sda5
+
::* Change the name (in the file, not the file name) to <code>fedora3a</code>
  cp -v -R /tmp/sda5-files/* /media/sda5
+
::* Change at least one of the hexadecimal characters in the UUID. Do not change the length of the UUID. Valid hexadecimal characters are 0-9 and a-f.
rm -rf /tmp/sda5-files
+
<ol type="a" >
mount -a
+
  <li value="6">Issue this command: <code>virsh define fedora3a.xml</code>
}}
+
  <li>Issue the command <code>virsh list --all</code> and record any changes.
 +
<li>Issue the command: <code>virsh undefine fedora3a</code>
 +
  <li>List all of the virtual machines again, and note any changes. </li></ol>
 +
  <li>For the remainder of these labs, it is assumed that you will backup <u>'''both'''</u> the images and xml configuration files for <u>'''all'''</u> Virtual machines, when asked to backup your virtual machines. It is also highly recommended to backup these files to an external storage device (eg. USB key) in case the host machine gets "wiped" and you need to rebuild your HOST machine and then restore your Virtual Machines...</li>
 +
<li>Answer this question in your log book:</li>
 +
</ol>
 +
::* In order to fully back up a virtual machine, what information should be saved in addition to the virtual machine image?
  
By default, the Grub boot loader allows anyone with access to the computer at boot time to set the runlevel, or change the boot parameters, which can allow them to influence the init process and which kernel image is loaded. Anyone with access to the boot prompt can therefore bypass security controls and control which software is loaded. For example, rebooting to runlevel 1, known as single user mode, gives the user root priveleges without the need for a password! Obviously, giving a non-administrator this much control can be dangerous, and it is wise to protect the boot loader with a secure password.  
+
{{Admon/important|Backing up VMs|It is essential to back up your VMs at the end of each lab, so you can easily restore them if something goes wrong in the next lab.}}
  
We will need to choose a password, encrypt with the grub programs hash utility (called md5crypt), and add the encrypted hash of your password to the grub configuration file, /etc/grub.conf
+
{{Admon/tip|Shutting Down the Host while Virtual Machines are Running|If you shut down your host system while virtual machines are running, they will be suspended, and will resume the next time you boot your host system.}}
  
{{Admon/important|Do not lose the GRUB password|If you lose the GRUB password you will not be able to change boot parameters when you boot the system. If you need to write it down, put it in a safe place, where no one will be able to tell what it is for.}}
+
'''Answer the Investigation 6 observations / questions in your lab log book.'''
  
# Choose a suitable password.
+
== Investigation 7: Kickstart Files ==
# Open the grub program by typing the command: <code>grub</code>
 
# At the grub prompt, type in the command: <code>md5crypt</code>
 
# When prompted for a password, carefully type in your password. The program will display the encrypted hash of your password. Carefully write down that encrypted hash generated by the program.
 
# Type the command: <code>quit</code> to exit the grub program.
 
# Open the grub configuration file, <code>/etc/grub.conf</code> for editing. (This file is actually linked to /boot/grub/grub.conf).
 
# Carefully add the line: <code>password --md5 ''password-hash''</code> (note: ''password-hash'' is the hash you generated with md5crypt) Place this line between the splashimage line and the title line. If there are other lines there, there is no need to remove them. Just insert your password line as a new line.
 
# Make sure you have not made a mistake. What you type in must match exactly the output from the md5crypt command.
 
# While you are editing the file you should also increase the timeout for grub to automatically boot the default OS. Edit the line <code>timeout=0</code> to <code>timeout=5</code> to give us more time to interrupt the process.
 
# You should also ensure that the grub boot menu is not hidden. Add a hash sign (<code>#</code>) to the start of the line which reads: <code>hiddenmenu</code>
 
# Save the file and exit. Your Grub boot loader is now password protected.
 
# Find the section of [http://fedorasolved.org/post-install-solutions/runlevel this article] that explains how to change the runlevel at boot time, and read it. Reboot your system, trying to change to runlevel 1 from the boot prompt, and see if the password protection worked.
 
# From now on, when you want to change boot parameters when you boot, you must type lowercase <code>p</code> at the boot prompt and enter the required password.
 
  
== Completing the Lab ==
+
{{Admon/tip|SSHD and Firewall|If you have restarted your virtual machine ''fedora1'', the sshd server you started in investigation 1 (step 15) will no longer be running. In addition, the firewall will have reverted to its original state. In order to use '''scp''', below, you will need to restart ssh and adjust the firewall again.<br /><br />If students cannot backup their kickstart files using the '''scp''' command, they can use a web-browser to access their Seneca e-mail with attachment (copy kickstart file to their home directory first!). For the text-based Linux system "fedora3", students can use the '''mail''' command (refer to the man command to learn how to send e-mail attachments). }}
  
Check off the following items before asking your instructor to check your lab:
+
When you perform a non-Kickstart installation, the installation program creates a Kickstart file in the <code>/root</code> directory for reference.
  
* Task 1 - Install GNU/Linux Workstation using Fedora
+
# Obtain the kickstart files for all four of your installations (your disk pack ''f17host'', plus the ''fedora1'', ''fedora2'', and ''fedora3'' virtual machines).
* Task 2 - Collect system information after installation.
+
# To prevent confusion, copy your kickstart files to kickstart filenames that describe their purpose (eg. kickstart_host, kickstart_fedora1, kickstart_fedora2, etc...)
* Task 3 - Customize and configure boot time environment
+
# Copy them all to your f17host system (tip: use <code>scp</code>), or use the hint in the tip box above to send via e-mail.
* Task 4 - Collect network information
+
# Compare these files. What are the differences? Similarities? (Tip: you may want to use tools such as <code>sdiff</code> to help with the comparison).
* Task 5 - Password protect Grub Bootloader
+
# How could you use the kickstart file produced by the installation program to perform additional, identical installations?
  
Arrange evidence for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:
+
'''Answer the Investigation 7 observations / questions in your lab log book.'''
  
* Grub is password protected.
+
= Completing the Lab =
* Can login with your "learn" account name
 
* Has all the mount points
 
* Has the package count
 
* Has edited the default runlevel
 
* Has the correct IP address and MAC address
 
* Find out the default route (gateway)
 
* IP of the DNS name server
 
* '''Name and contact information on your disk pack'''
 
  
{{Admon/tip|Runlevel|Feel free to change your default runlevel to 3 or 5 according to your own personal preference. Note that later labs may assume a particular runlevel.}}
+
'''Arrange evidence for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:'''
  
== Preparing for the Quizzes ==
+
# Three working virtual machines created.
 +
# Four kickstart files.
 +
# All virtual machines fully updated.
 +
# All virtual machines backed up.
 +
# Installation comparison table filled in.
 +
# Lab Logbook (lab2) notes filled-in.
  
# How many packages were installed?
+
= Preparing for Quizzes =
# How many files (correct to the nearest hundred) were installed?
 
# How many mount points were used?
 
# How many users were created automatically on your system (do not count your learn account)?
 
# What is your learn account's UID and GID?
 
# What is your learn account's home directory?
 
# What is the home directory for the user "root"?
 
# How do you determine the host name of your GNU/Linux workstation?
 
# What command can display the NIC's MAC address?
 
# Which file contains the default "runlevel" value for your GNU/Linux workstation?
 
  
{{Admon/important|Unbind your MAC address|Before moving your disk pack to another system, [[Unbinding MAC Addresses on Fedora|unbind your MAC address]].}}
+
# What is the name of the Fedora installation program?
 +
# Which factors recorded in your table (above) were due to the type of installation performed, and which factors were due to the amount of software installed?
 +
# Which type of installation works best for confirming compatibility with hardware before installation? Why?
 +
# Which type of installation works best for installing large numbers of computers? Why?
 +
# What factors affect installation time?
 +
# How can you reduce the number of software updates required immediately after installation?
 +
# Why would you enable additional repositories during installation?
 +
# What does the file <code>/root/anaconda-ks.cfg</code> contain, and how is it created?
 +
# How do you start and stop virtual machines?
 +
# How do you SSH into your virtual machines?
 +
# What is the purpose of and relationship between these pieces of software?
 +
#* libvirt
 +
#* libvirtd
 +
#* virsh
 +
#* virt-manager
 +
#* virt-install
 +
#* kvm
 +
# The kickstart installation (fedora3) was a network installation. Can a kickstart file be used with a DVD installation?
 +
# The kickstart installation (fedora3) was fairly fast. Why? Under what circumstances would it take a long time, even on a fast network?
 +
# What other types of installation sources are possible (besides Live Disc, Installation Disc, and Network?)

Latest revision as of 12:29, 24 September 2018

Stop (medium size).png
THIS IS AN OLD VERSION OF THE LAB
This is an archived version. Do not use this in your OPS235 course.

Fedora 17 Installation Methods (on Virtual Machines: fedora1, fedora2, fedora3)

Introduction

A virtual machine is a software simulation of a computer which can be used as though it were actual hardware. It's possible to run multiple virtual machines on one computer, reducing hardware requirements and introducing flexibility. Some common uses of virtualization include:

  • Software testing -- Using multiple operating systems simultaneously on a single computer for testing and experimentation.
  • Network simulation -- Testing network services, protocols, and security scenarios with a small number of computers.
  • Isolation -- Protecting multiple sets of data by storing them on multiple virtual machines. If one of the virtual machines is compromised, the data on other virtual machines is still protected.
  • Server consolidation -- Reducing the number of physical servers in a network by moving physical machines to virtual machines. This saves hardware, administration, cooling, and electricity costs, and it can increase the utilization of hardware (by ensuring that the hardware is not under-loaded).
  • Load-balancing and disaster recovery -- It is possible to migrate virtual machines between different physical machines, to ensure that a workload is balanced across multiple computers, to allow routine hardware maintenance and upgrading, and to compensate for hardware failure or other disasters.

In this lab, you will create three virtual machines. This also gives you an opportunity to experiment with different ways of installing Fedora. Later in this course you will install another operating system distribution in a virtual machine.


You should already have both a Fedora installation DVD and a Fedora LIVE CD.


In both cases, the boot media (which you used to load the installation software) and the installation source (the software that got installed) were the same: your CD/DVD provides both. However, the Fedora (and most other Linux distributions) permits you to use any combination of boot media and installation media:

Method Boot Media Install. Source
CD or DVD
Hard Disk
USB Flash Drive
Network (http/nfs repository)
PXE Network Boot X

Objectives

  • Understand Virtualization
  • Use KVM virtualization on Fedora
  • Use a variety of installation methods:
    • Live Image Installation
    • Network Installation
    • Kickstart Installation
  • Understand the advantages and disadvantages of each type of installation, and be able to select the best installation method for a particular situation.


Required Materials (Bring to All Labs)

  • Fedora 17 LIVE CD
  • Fedora 17 x86_64 Installation DVD
  • SATA Hard Disk (in removable disk tray)
  • USB Memory Stick
  • Lab Logbook


Prerequisites

  • Completion and Instructor "Sign-off" of Lab 1: OPS235 Lab 1


Linux Command Online Reference

Each Link below displays online manpages for each command (via http://linuxmanpages.com):

  • virsh (Refer to Fedora Virtualization Guide link in the "Resources on the Web" section)
  • gzip / gunzip


Resources on the Web

Virtualization: Live Image Installation: Network Installation: Kickstart Installation:

Fedora Virtualization Guide

Fedora 17 Installation Guide

Fedora 17 Installation Guide

Performing Lab 2

Preparation

Idea.png
Performing this Lab off the Seneca network (eg. at home)
It is recommended to perform this lab in one of Seneca College's labs. This lab uses servers which are on the Seneca network and which are not available from other locations (such as your home). If you attempt this lab from another location, adjust the belmont.senecac.on.ca URLs to point to another Fedora mirror server -- note that you may need to change the directory name as well as the server name. The installation of the fedora3 virtual machine must be done at Seneca.
  1. Open a web-browser, and open the OPS235 Lab #2 WIKI.

    NOTE:
    You need to enter your "MySeneca" username and password to obtain a "wired" Internet connection (otherwise, you will not be able to perform the "groupinstall" command in the next step). Remember to perform a "wired-connection" (logging in with your MySeneca username and password via a web-browser) every time you boot-up your host machine...

  2. Install the Fedora virtualization software: yum groupinstall "Virtualization" or pkcon install @virtualization The virtualization software installed is in three parts:
  • A system service named libvirtd that manages the VMs.
  • Tools to manage virtualization, including the virt-manager graphical tool and the virsh command-line tool.
  • The actual virtual machines themselves.
  1. Start the virtualization service: service libvirtd start
  2. The firewall configuration is altered by the addition of the virtualization software. Restart the firewall so that these changes become active: service iptables restart
Stop (medium size).png
Reboot your fedora host now
virt-manager may not work properly unless you reboot after installing the virtualization software.
  1. After rebooting your computer system, and logging back into your account, start the graphical tool by selecting the menu options Activities>Applications>System Tools>Virtual Machine Manager or by typing the command virt-manager
Important.png
Run virt-manager as a regular user
Running virt-manager as root may not work due to configuration issues.

Investigation 1: Installing from a Live Disc

Idea.png
Using an Image instead of a Live Disc
It is recommended that you perform this installation from your Fedora LIVE CD. As a matter of interest (for future reference), it is possible to install directly from the ISO file you used to burn your Live CD. There are many Internet tutorials that show the individual how to perform that task.

Introduction

In this investigation, you will install Fedora from your live disc, and observe the differences between this type of installation and the DVD installation previously performed.

VM Details

  • Name: fedora1
  • Boot media: Fedora Live CD
  • Installation source: Fedora Live CD
  • Memory: 768MB
  • Disk space: 10GB
  • CPUs: 1

Screen-Shot Thumbnail Reference

Note.png
Virtual Machine Screen Shots Thumbnails
While performing the Virtual Machine setup, click on the thumbnails below to provide a "visual reference" while performing this section.
Virtual Machine Manager: Create a New Virtual Machine
Step 1 of 5: Create a New Virtual Machine
Step 2 of 5: Create a New Virtual Machine
Step 3 of 5: Create a New Virtual Machine
Step 4 of 5: Create a New Virtual Machine
Step 5 of 5: Create a New Virtual Machine

Steps

  1. In the Virtual Machine Manger, click on the icon to Create a Virtual Machine in the upper-left corner:
    (refer to Virtual Machine Manager thumbnail above).
  2. A window will appear with the title New VM. There are five steps to be completed; click Forward after each step:
  3. Step 1 of 5: Enter the virtual machine (called fedora1) name and select Local install media (refer to Step 1 of 5 thumbnail above).
  4. Step 2 of 5: Insert the CDROM or DVD containing the Fedora Live Disc image. Wait a moment for the disc to be recognized, then select Use CDROM or DVD as the install media. Set the OS type to Linux and the Version to Fedora 17 (refer to Step 2 of 5 thumbnail above).
  5. Step 3 of 5: Set the memory to 768 MB and the number of CPUs to 1 (refer to Step 3 of 5 thumbnail above).
  6. Step 4 of 5: This next step creates a disk file that will be used to simulate the virtual machine's disk drive. Select a size of 10 GB and checkmark the box labeled Allocate entire disk now (refer to Step 4 of 5 thumbnail above).
  7. Step 5 of 5: Review the options that you have selected. Make a note of the storage location. If anything needs to be changed, use the Back button to go back and edit it; otherwise, click Finish (refer to Step 5 of 5 thumbnail above).
Important.png
Removing and Recreating VMs
If for some reason the user wants to remove a Virtual Machine, they can right-click the VM, and select delete in the Virtual Machine Manager. It is recommended to "delete the image file" in the remove VM dialog box when removing and then recreating a VM. Note: If you fail to properly remove the VM image file, it may affect the hard disk size for the new VM (i.e. use the old smaller size. Make certain to remove that VM image file prior to recreating the VM.


Note.png
Fedora LIVE CD Install Screen Shots Thumbnails
While performing the Fedora 17 LIVE CD install, click on the thumbnails below to provide a "visual reference" while performing this particular Fedora installation.
The Virtual Machine will now start.
Ignore and close the "Failed To Load" dialog box. Search for the panel on the upper-left-hand side of the screen.
Login to the VM and double-click:
Applications
>System Tools
>Install to Hard Disk.
Select Specialized Storage Devices
Select Virtio Block Device.
You will get the Firstboot configuration questions during the boot process.
  1. The virtual machine will now start. Select the default menu item labelled: Start Fedora 17. The virtual machine is running from the live disc at this point, and no software has been installed on the hard drive of the virtual machine.
  1. Login to the VM and click: Applications>System Tools>Install to Hard Drive. The installation program, similar to the one used when installing Fedora in Lab 1, will appear. You will get a warning at one point during the installation process that the disk "May contain data" or "may need to be re-initialized" -- this is simply a warning that the virtual disk is completely blank, and it is safe to proceed with the installation.
Note.png
Virtual Machine Screen Size
The virtual machine screen size will change resolution as it switches from text to graphics mode. Use the VM menu option View>Resize to VM to resize the window to show the entire VM display. If this is larger than your screen size, use View>Scale Display>Always to scale the image so it fits on your screen.
  1. During the installation process, when prompted for a storage device, first select Specialized Storage Devices, and then select the Virtio Block Device option.
  2. When prompted for the hostname, enter fedora1, and when prompted for the timezone, select Toronto - Eastern Time Ontario, and when asked about storage, select Use All Space. Use the default values for all other fields. Notice that the installer does not ask you what software should be installed; compare the installation time to the amount of time it took to do your Lab 2 installation. Record this information in the table contained in Investigation 4.
  3. When the installation is complete, click on the reboot button at the bottom right-hand corner of the screen.
  1. Start the VM from its disk image. This can be done graphically by selecting the Virual machine name, and then clicking on the Open button, and then click the play button when the next screen appears (or by selecting Virtual Machine>Run from the virtual machine menu). You will get the Firstboot configuration questions during the boot process (asking you to create a user, set the date and time, and optionally send the hardware profile to the Fedora Project). Create a user with the same name as your Matrix account.
  2. Login using the new user account.
Note.png
Network / Service Considerations
Please perform the tasks below in order allow these Fedora systems to be able to communicate with each other. Failure to properly perform these operations can cause problems in future labs.
  1. Enable SSH access to your virtual machine with these commands (semi-colon allows commands to be run in sequence):
    service sshd start; chkconfig sshd on
  2. Find out the IP address of your virtual machine: ifconfig eth0
  3. Enter the following command on your virtual machine to create a firewall exception to allow ssh traffic into the machine:
    iptables -I INPUT -p tcp -s0/0 -d0/0 --dport 22 -j ACCEPT
  4. Confirm that you can ssh to your virtual machine from the host (your main Fedora installation): ssh IPaddress
Idea.png
Switch to Virtual Machine Manager Window
If you are currently in a Virtual machine, but want to switch to the Virtual Machine Manager Window, simply click Activities> Select the Virtual Machine manager window.

Answer the Investigation 1 observations / questions in your lab log book.

Investigation 2: Installing from the Network

Idea.png
Authenticate to the network
The rest of this lab uses network access. Be sure to authenticate to the network using your browser before proceeding.

Introduction

It is possible to install Fedora entirely from the network. In this investigation, you will install Fedora from a webserver on Seneca's LAN.

VM details

Steps

  1. Create the VM (called fedora2) as you did with the fedora1 virtual machine, except:
  2. Observe the boot process. How is it different from booting from an optical disc (CD/DVD)?
  3. Start the installation process (make certain to use information in the VM Details section above).
  4. When you get to the disk partitioning step, select Use All Space and enable the checkbox labelled Review and modify partition layout.If an dialog box displays a permissions problem, then click yes to proceed. On the next screen, change the logical volumes as follows:
    • Reduce the size of the root LV to 8000 MB.
    • Add a logical volume with a size of 2000 MB and a mountpoint of /home (you can name it whatever you want, and use ext4 as the file-system type).
  5. On the software selection screen, select Graphical Desktop.
  6. On the same screen, select the "Fedora 17 - x86_64" and the "Fedora 17 - x86_64 - Updates". Leave "Installation Repo" selected. DO NOT enable the "Test Updates" repository.
  7. Complete the installation. Record the time taken to install, and compare this to the time taken by the previous installations.Record this information in the table contained in Investigation 4.

Answer the Investigation 2 observations / questions in your lab log book.

Investigation 3: Installing from the Network using Kickstart

Introduction

When Fedora is installed using the techniques you have used so far, the user is asked a number of questions. In some situations, it is better to provide the answers to these questions in a file rather than answer them individually. This type of file is called a kickstart file.

In this investigation, a kickstart file is provided for you. You can also create or modify a kickstart file using a regular text editor or a graphical tool.

VM details

Steps

  1. Create the VM as you did with the fedora2 virtual machine, specifying a network install as before, except:
  2. Observe the installation. How is it different from booting from an optical disc (CD/DVD)?
  3. Complete the installation. Record the time taken to install, and compare this to the time taken by the previous installations.
  4. What happens when the installation is finished?
  5. Take a look at the kickstart file (using the URL you entered) to determine the root password as well as the name and password for the first user account.
  6. Boot the virtual machine and log in (use the user ID and password information from the previous step). Compare the experience to the first time you booted the other virtual machines.Record this information in the table contained in Investigation 4.

Answer the Investigation 3 observations / questions in your lab log book.

Investigation 4: Updating and Comparing the VMs

  1. In each VM, run this command: yum update
  2. Record the answers to these questions in your log book:
    • How long did it take to run on each VM? How many packages were updated?
    • Why does it take longer in some VMs than others?

Complete the following table (and transfer into your lab2 log-book notes):

f17host fedora1 fedora2 fedora3
Installation Method Installation Disc Live Disc Network Installation Network Installation + Kickstart
Packages Installed
Updates Installed immediately after installation
Software could be selected during installation
Disk layout could be selected during installation
No questions asked during installation
Total installation time (after installation questions)
Amount of disk space used
Questions asked during first boot
Advantages of this type of installation
Disadvantages of this type of installation
This type of installation is recommended for...

Investigation 5: Managing Virtual Machines from the Command Line

Note.png
Manage virtual machines from the host
The commands used to manage virtual machines must be executed on the host (your disk pack) and not inside a virtual machine.
  1. Start the fedora1 virtual machine, and stop the fedora2 and fedora3 virtual machines.
  2. Switch to the f19host machine, and open a shell terminal.
  3. Enter these commands into your f19host machine and note the result:
    • virsh list
    • virsh list --all
    • virsh list --inactive
  4. Now, shut-down your fedora1 VM normally, and close the fedora1 VM window. Make certain NOT to close the Virtual Machine Manager main window.
  5. Switch to your terminal and issue the command: virsh start fedora1
  6. Check to see if your fedora1 VM is now running.
  7. Switch to the terminal and issuevirsh list --all and confirm the status of the fedora1 VM.
  8. There are other commands that can be used (such as suspend, or shutdown). The "shutdown" command may not always work since it sends a request to "shutdown virtual machine gracefully", but may not always work. Why do you think it is useful to have commands to manipulate VMs?
Note.png
Virtual Machine Does not Shutdown from Command
If the Virtual machine fails to shutdown from the virsh shutdown command, then you can go to the Virtual Machine manager and halt or shutdown within the VM itself, then you can click the PowerOff button in the VM window. You'll want to avoid a forced shutdown since those are equivalent to yanking the cord out of the wall on a physical machine!


Answer the Investigation 5 observations / questions in your lab log book.

Investigation 6: How do I backup a virtual machine?

Important.png
Backing up VMs
There are two general processes in order to back up your images:
  1. Compressing your images (also recommended to backup up to external storage USB Key) using the gzip command.
  2. Backup the VM xlm configuration file (preferably to USB key) using virsh shell command to add VM to virtual machine manager list (in the event that the HOST machine is "wiped" and re-installed, but VM images and xml configuration files have been backed up external storage).

Taking the time to backup the image of the Operating System's file system allows the user to return to a "restoration point" using the gunzip command in case something bad occurs to the OS during a lab.
Failure to take the time to make and confirm backups can result in loss of lab work for the student!
  1. Shut down all of the virtual machines.
  2. Change to the directory /var/lib/libvirt/images/. Note the size of the files in this directory. What do these files contain?
  3. Make a compressed backup of the fedora3.img file to your home directory with this command: gzip < fedora3.img > ~YourUserId/fedora3.img.backup.gz
    (Note: Make certain to use the redirection signs "<" and ">" properly in the command!)
Stop (medium size).png
Make sure the backup is successful!
If there are any error messages, DO NOT proceed past this point. You're going to destroy your fedora3 virtual machine and restore it using the backup you have created -- if there are any problems with the backup, you will not have a working virtual machine, and will have to re-install it.
  1. Compare the size of the compressed and original files.
  2. Start the fedora3 VM.
  3. Make certain that you are in your fedora VM and not in your Fedora main system!
  4. Wreck only your fedora 3 system! Try this command inside the fedora3 virtual machine: rm -rf /*
  5. Shut down the VM. If you tried to start the Fedora3 VM, it would not boot since all system files have been removed!
  6. Restore the original image from the backup in your home directory by typing this command: gunzip < ~YourUserId/fedora3.img.backup.gz > fedora3.img
  7. Restart the VM. Is it working normally?
  8. Create compressed backups of your other virtual machines.
  1. You should make a copy of the xml configuration file in case you "wipe" and re-install the host machine, and want to add a restored VM backups to the virtual machine manager list. We will demonstrate using the fedora 3 xml configuration file, and prove that a "clone" can be added to your list.Please perform the following step:
    1. Verify that you are in the directory: /var/lib/libvirt/images/.
    2. Execute the following command: virsh dumpxml fedora3 >fedora3.xml
    3. Examine the file fedora3.xml. What does it contain? What format is it in?
    4. Make a copy of fedora3.xml called fedora3a.xml.
    5. Edit the file fedora3a.xml, making the following changes:
    • Change the name (in the file, not the file name) to fedora3a
    • Change at least one of the hexadecimal characters in the UUID. Do not change the length of the UUID. Valid hexadecimal characters are 0-9 and a-f.
    1. Issue this command: virsh define fedora3a.xml
    2. Issue the command virsh list --all and record any changes.
    3. Issue the command: virsh undefine fedora3a
    4. List all of the virtual machines again, and note any changes.
  2. For the remainder of these labs, it is assumed that you will backup both the images and xml configuration files for all Virtual machines, when asked to backup your virtual machines. It is also highly recommended to backup these files to an external storage device (eg. USB key) in case the host machine gets "wiped" and you need to rebuild your HOST machine and then restore your Virtual Machines...
  3. Answer this question in your log book:
  • In order to fully back up a virtual machine, what information should be saved in addition to the virtual machine image?
Important.png
Backing up VMs
It is essential to back up your VMs at the end of each lab, so you can easily restore them if something goes wrong in the next lab.
Idea.png
Shutting Down the Host while Virtual Machines are Running
If you shut down your host system while virtual machines are running, they will be suspended, and will resume the next time you boot your host system.

Answer the Investigation 6 observations / questions in your lab log book.

Investigation 7: Kickstart Files

Idea.png
SSHD and Firewall
If you have restarted your virtual machine fedora1, the sshd server you started in investigation 1 (step 15) will no longer be running. In addition, the firewall will have reverted to its original state. In order to use scp, below, you will need to restart ssh and adjust the firewall again.

If students cannot backup their kickstart files using the scp command, they can use a web-browser to access their Seneca e-mail with attachment (copy kickstart file to their home directory first!). For the text-based Linux system "fedora3", students can use the mail command (refer to the man command to learn how to send e-mail attachments).

When you perform a non-Kickstart installation, the installation program creates a Kickstart file in the /root directory for reference.

  1. Obtain the kickstart files for all four of your installations (your disk pack f17host, plus the fedora1, fedora2, and fedora3 virtual machines).
  2. To prevent confusion, copy your kickstart files to kickstart filenames that describe their purpose (eg. kickstart_host, kickstart_fedora1, kickstart_fedora2, etc...)
  3. Copy them all to your f17host system (tip: use scp), or use the hint in the tip box above to send via e-mail.
  4. Compare these files. What are the differences? Similarities? (Tip: you may want to use tools such as sdiff to help with the comparison).
  5. How could you use the kickstart file produced by the installation program to perform additional, identical installations?

Answer the Investigation 7 observations / questions in your lab log book.

Completing the Lab

Arrange evidence for each of these items on your screen, then ask your instructor to review them and sign off on the lab's completion:

  1. Three working virtual machines created.
  2. Four kickstart files.
  3. All virtual machines fully updated.
  4. All virtual machines backed up.
  5. Installation comparison table filled in.
  6. Lab Logbook (lab2) notes filled-in.

Preparing for Quizzes

  1. What is the name of the Fedora installation program?
  2. Which factors recorded in your table (above) were due to the type of installation performed, and which factors were due to the amount of software installed?
  3. Which type of installation works best for confirming compatibility with hardware before installation? Why?
  4. Which type of installation works best for installing large numbers of computers? Why?
  5. What factors affect installation time?
  6. How can you reduce the number of software updates required immediately after installation?
  7. Why would you enable additional repositories during installation?
  8. What does the file /root/anaconda-ks.cfg contain, and how is it created?
  9. How do you start and stop virtual machines?
  10. How do you SSH into your virtual machines?
  11. What is the purpose of and relationship between these pieces of software?
    • libvirt
    • libvirtd
    • virsh
    • virt-manager
    • virt-install
    • kvm
  12. The kickstart installation (fedora3) was a network installation. Can a kickstart file be used with a DVD installation?
  13. The kickstart installation (fedora3) was fairly fast. Why? Under what circumstances would it take a long time, even on a fast network?
  14. What other types of installation sources are possible (besides Live Disc, Installation Disc, and Network?)