= Software Location =
httphttps://scotlandgithub.proximity.on.cacom/chris/sourcectyler/ip-info/0.1
= License =
The software is licensed under the [http://www.gnu.org/licenses/old-licenses/gpl-2.0.html GPL version 2] or higher.
= README More Information =
This software lets you determine your system's IP address withoutan attached video monitor. It was designed for use with the RaspberryPi computer, but may be used on many other types of systems. This package provides two scripts and two services. The scripts are: 1. ip-read :: reads the IP address over the system's speakers This script finds the first non-loopback IPv4 address and reads italoud using espeak. 2. ip-flash :: flashes the IP address over the system LED This script finds the first non-loopback IPv4 address and flashesit on the system LED (/sys/class/leds/led0 by default). * 1 - 9 short flashes indicate the digits 1 - 9* 10 short flashes indicate the digit 0* a long flash indicates an octet separator (dot)* a brief pause separates digits After ip-flash runsFor additional information, see the LED is reconnected to its original trigger(mmc, wireless, etc)README. Each of these scripts has a corresponding systemd unit md file andcan be enabled to run on boot; these can be enabled with thesecommands: * systemctl enable ip-read.service* systemctl enable ip-flash.service Your feedback on these scripts is welcome; please contact theauthor at: Chris Tyler <chris@tylers.info> ctyler on irc://irc.freenodegithub page.net/seneca