GPU621 Team 1

From CDOT Wiki
Revision as of 12:33, 1 December 2016 by Timothy Chun Yan Ngai (talk | contribs) (Getting Started)
Jump to: navigation, search

What is VTune Amplifier?

Application that apply different analysis to your program
Helps programmer debugs and improve program
Provide GUI version
It has both a standalone and a IDE add-on

Where To Get Vtune ?

Price: $899
Window / Linux
Free Software Tools
- Students
- Educators
- Academic researchers
- Open source contributors


Download Vtune Here

Getting Started

When using VTune Amplifier the following page will shows
Tim getstart 1.png
First you need create a project.A project will have can save more than one Analysis. Therefore, you can compare the different analysis and this helps you to compare the code you change.

Tim getstart 2.png
After the project is created. You need to it will automatically start a Analysis. You need to locate your program and setup the parameters as well. You need need to change the working directory if the default one is not correct.

Tim getstart 3.png
In this tab you can choose any Analysis type and run the analysis. In the following turtoral we did not use the VTune Amplifier program. We use the Visual Studio with the VTune Amplifier. This way it will set up the program location, parameters and working directory for you automatically.

VTune Tutorial 1: Finding HotSpot

1.png

This example program will be downloaded when you install VTune Amplifier. Following is the directory that contain the sample code from Intel.

[Program Files]\IntelSWTools\VTune Amplifier XE <version>\samples\en\C++\tachyon_vtune_amp_xe.zip

Open the project using Visual Studio. Then you can run the the VTune Amplifier and click new Analysis. (You need to download Vtune Amplifier to have that tab on Visual Studio)

Tim Hotspt 2.png

This should be the next page you will get. You begin to choose different type of Analysis here. We are going do a Basic Hotpots Analysis.Then click start to start the Analysis.

Tim Hotspt 3.png

The program should run itself after you begin.You will notice that the image is loading from the bottom to the top. After the program finish running, it will take a while for Amplifer to generate report.

Tim Hotspt 4.png

After the program finish running, it will take a while for Amplifer to generate report.

Tim Hotspt 5.png

The first page will shows a summary of the program.The time it took, the top hotspots, CPU usage etc. We will focus looking at the Hotspots table. we notice that the "initialize_2D_buffer" use the most the CPU time. If you look at the code on find_hotspots.cpp you will notice it is actually one function in side that cpp file

Tim Hotspt 7.png

We go to the bootom up tab. it will give you a graph that shows the Hotspots table you got. You can clearly see that "initialize_2D_buffer" use the most time compare to the other function.

Tim Hotspt 8.png

If we double click on this function we it will shows the sources code and shows you which line of the code actually use the most time in the specific function. Now we can tell that most of the time are spend on the while loop.

Tim Hotspt 9.png

To compare a paralleled version of this code I already have a program that use CILK PLUS to parallelize that program. Below is the link to download that code. Simply replace the find_hotspots.cpp with this code, build it and run the Analysis again.

Link:File:Find hotspots.zip

Tim hotspot 15.PNG Tim hotspot 13.PNG Tim hotspot 14.PNG

This is the code we change.
- First we change to header to allow Cilk Plus.
- Second we comment the bad slow method from "initialize_2D_buffer" and use the faster method.
- Third we add some Cilk Plus code to make it the program run in parallel.


Tim Hotspt 10.png

When you run the Analysis this time you will see the program image load at the same time in different level instead of loading from the bottom to the top.


Tim Hotspt 11.png

This time we should able to see that the Elased Time is shorter than the old time about 10second and the Top Hotspot is no longer "initialize_2D_buffer".


Tim Hotspt 12.png

If we go to bottom up tab you can see that the "initialize_2D_buffer" is no longer exist and it shows the Cilk worker graph that shows the program is not run a parallel.

VTune Tutorial 2: Locks and Wait Tutorial

1. Prepare for Analysis

Note: configuration step is skipped and using default application configuration.

Determine the baseline (total execution time which you will compare subsequent runs of the application).

Do this by running the application for the first time.

After running the application, the baseline for the first run is 6.063s.

1.PNG


2. Find lock

2a. Choose and run locks and waits analysis:

With visual studio, click on "new analysis".

Choose your analysis target (the application executable).

Click on the Analysis Type tab. Under algorithm analysis, click on "Locks and Waits" and click start to run the analysis.

Click on the Analysis Type tab. Under algorithm analysis, click on "Locks and Waits" and click start to run the analysis.

3.PNG


You should see the Locks and Waits viewport and the summary of the results.

4.PNG


2b. Interpret result data:

To interpret the data on the sample code performance, do the following:

1. Analyze the basic performance metrics. 2. Identify locks.


Analyze the basic performance metrics:

The Result summary section provides data on the overall application performance per the following metric:

5.PNG

1.) Elapsed Time is the total time the application ran, including data allocation and calculations

2.) Wait Time occurs when software threads are waiting due to APIs that block or cause synchronization. Wait Time is calculated per thread, so the total wait time may exceed the application Elapsed time. Expand the wait time metric to view a distribution per processor utilization level. In the sample application, most of the Wait time is characterized with an ineffective processor usage.

3.) Wait Count is the overall number of times the system wait API was called for the analyzed application.

4.) Spin Time is the time a thread is active in a synchronization construct; the current value exceeds the threshold, so it classified as a performance issue and highlighted in pink.

5.) CPU Time is the sum of CPU time for all threads.

6.) Total Thread Count is the number of threads in the application.

7.) Paused Time is the amount of Elapsed time during which the analysis was paused via GUI, CLI commands, or user API.

For the analyze_locks application, the Wait time is high, to identify the cause you need to understand how this Wait time was distributed per synchronization objects.

The Top Waiting Objects section provides the list of synchronization objects with the highest Wait Time and Wait Count, sorted by the Wait Time metric.

6.PNG


For the analyze_locks application, focus on the first three objects and explore the Bottom-up pane for more details.

The Thread Concurrency Histogram represents the Elapsed time and concurrency level for the specified number of running threads. Ideally, the highest bar of your chart should be within the OK or Ideal utilization range.

7.PNG

Note the Target Concurrency value. By default, this number is equal to the number of physical cores. Consider this number as your optimization goal.

For the sample code, the chart shows that analyze_locks is a multithreaded application running maximum 4 threads simultaneously on a machine with 4 cores. But it is not using available cores effectively.

Hover over the second bar to understand how long the application ran serially. The tooltip shows that the application ran one thread for almost 6.611 seconds, which is classified as Poor concurrency.

The CPU Usage Histogram represents the Elapsed time and usage level for the logical CPUs. Ideally, the highest bar of your chart should be within the Ok or Ideal utilization range.

8.PNG

VTune Tutorial 3: Disk input Output Analysis

Resources