Fennec on a Nokia N810
Documentation on Building and Testing Fennec on the Nokia N810 device.
Setting up your environment.
There are instructions available on the Fennec Mobile page In order to develop for Fennec on an Nokia device one must install scratchbox.
In order to compile Fennec for the nokia devices. we need 3 different components in order to make this work scratchbox (Scratchbox is the cross platform compilation tool that is needed.)
scratchbox toolchain (A set of tools used for a certain versions of compiler libraries, special headers and other tools a cross-toolchain enables compiling binaries for different CPU architecture than the host CPU)
maemo sdk (Maemo is an open source development platform that runs on Linux and the SDK provides a set of libraries and compilier and emulator that "emulates" the Nokia for developing and debugging)
note: theres an installer(choose to install everything)
instructions are available at 
note: sometimes you will require to install the libIDL and setup the PKG_CONFIG_PATH
to do that you must login into scratchbox. /scratchbox/login
wget http://ftp.gnome.org/pub/gnome/sources/libIDL/0.8/libIDL-0.8.9.tar.gz tar -xzvf libIDL-0.8.9.tar.gz cd libIDL-0.8.9 ./configure make fakeroot make install cd ..
note: if the libIDL error appears on build run this. export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pgkconfig
If at any point in time you wish to uninstall Scratchbox you can follow these instructions.
note: these commands are done as root.
# apt-get remove scratchbox-libs
removes all info int he users folder(save all your important files)
# /scratchbox/sbin/sbox_ctl stop
/scratchbox directory should be empty
# rm -rf /scratchbox/users
scratchbox mounts directories sbox_ctl stop then you can remove the rest of scratchbox
# rm -r /scratchbox
Setting up your N810 for development
In order to access the N810 remotely on your wireless network you will need a wireless router.
In order to access the device from outside your wireless network over the internet you will need a service like DynDNS if your IP is not static. Then port forward the ssh communcation to the device.
You might also want to consider giving the device a dedicated IP address.
It is required for you to install SSH and fix the mounting options on the device.
Install SSH on the device: 
Fix the mounting options on the device in order to be able to run your builds on the built in memory card (/media/mmc2) There are instructions available here on how to do it. 
For more information on setting up your device visit: 
note: To find out the IP address of the device if you are on your local wireless network in Settings>Connection Manager>menu>Internet connection>IP address
Mozilla currently uses Mercurial for version tracking ref: 
To get a copy of the Fennec Source Login to scratchbox and run these commands.
hg clone http://hg.mozilla.org/mobile-browser mobile
Depending on your connection this might take a while. Once you have the source you will want to create a .mozconfig file you will want to place this inside the mozilla-central directory.
Here is a sample of a .mozconfig: .mozconfig
note: If you want to know what other build options are available to you check out: 
Once you have your .mozconfig saved in the mozilla-central directory To build Fennec just run
# make -f client.mk build
note: this will take a while
Once that is done you will have 2 directories in your object directory mobile and xulrunner
It is required for you to package Fennec and then copy it over to the device using scp command to do this follow these instructions
cd $objdir/mobile make package cd dist ls
then you should have a file called fennec-1.0a3pre.en-US.linux-arm.tar.bz2 note: if its not linux-arm you didn't build in the right environment
you will want to bunzip the file
then copy it over to the device
scp bunzip2 fennec-1.0a3pre.en-US.linux-arm.tar email@example.com:/media/mmc2/
note: /media/mmc2 is the built in memory card on the device
Running Chrome Tests
To run Chrome tests on Fennec on the Nokia N810 currently it is required that you apply 3 patches from bugs 470971, 460515, and 421611 then build it again
Follow these steps in scratchbox.
from your $objdir/xulrunner/
## create backup cp -R chrome chrome.bak
## NOTE: you need to do the following steps in a look for each directory ## dirs: [content, docshell, dom, toolkit, widget] rm -Rf chrome/*
cp -R chrome.bak/content chrome/
Then you will want to package and port your tests over to the device.
cd $objdir/xulrunner make test-package
you will end up with a file called
You will first want to uncompress the .bz2
then you will end up with a file called
This file you will copy over to the device.
scp xulrunner-1.9.2a1pre.en-US.linux-arm.tests.tar firstname.lastname@example.org:/media/mmc2/
note: media/mmc2 is the built in memory card on the device that you can use to test things.
python mochitest/runtests.py --appname=/path/to/fennec/fennec --chrome --utility-path=/path/to/bin --certificate-path=/path/to/bin --xre-path=/path/to/fennec/xulrunner --log-file=chrome_content.log --autorun --close-when-done
For more information visit: 
Mochitest is a automated testing framework. 
note: Due to Fennec's constant development these instructions will probably change. Please refer to these instructions  It is also highly encouraged that you go on IRC in to stay up-to-date with the information.
On IRC: irc.mozilla.org #mobile
Debugging on Fennec on a Nokia N810
Currently gdb is not working on Fennec on the device. The symbols get stripped during the packaging process.
note: Usually I put "DEBUG" in front of all the dump() and printf() so that you can grep for them on the console/terminal.
There are instructions on how to get gdb installed here: