= Software Location =
httphttps://scotlandgithub.proximity.on.cacom/chris/sourcectyler/ip-info/0.1
= Readme: ip-info 0.1 License =
This The software lets you determine your system's IP address withoutan attached video monitoris licensed under the [http://www. It was designed for use with the RaspberryPi computer, but may be used on many other types of systemsgnu.org/licenses/old-licenses/gpl-2.0.html GPL version 2] or higher.
This package provides two scripts and two services. The scripts are:= More Information =
1. ip-read :: reads the IP address over the system's speakers This script finds the first non-loopback IPv4 address and reads italoud using espeak. 2. ip-flash :: flashes the IP address over the system LED This script finds the first non-loopback IPv4 address and flashesit on the system LED (/sys/class/leds/led0 by default). * 1 - 9 short flashes indicate the digits 1 - 9* 10 short flashes indicate the digit 0* a long flash indicates an octet separator (dot)* a brief pause separates digits After ip-flash runsFor additional information, see the LED is reconnected to its original trigger(mmc, wireless, etc)README. Each of these scripts has a corresponding systemd unit md file andcan be enabled to run on boot; these can be enabled with thesecommands: * systemctl enable ip-read.service* systemctl enable ip-flash.service Your feedback on these scripts is welcome; please contact theauthor at: Chris Tyler <chris@tylers.info> ctyler on irc://irc.freenodegithub page.net/seneca