1
edit
Changes
no edit summary
<!-- Change this to DONE when you're done. -->
This page status is: '''DRAFTDONE'''.
= Title =
= Approach =
My approach to this project was to walk through the process of setting up a complete Koji Build System on the CDOT machines to test if the existing documentation worked and was correct. The intention was to make notes along the way of what steps worked well and which ones did not work. If a step did not work correctly I would turn to the Koji community and the internet for help. Once I found the correct step I would document it. I would also make note of any steps which were unclear and needed to be explained further. Once the Koji Build System was complete I would have a complete set of steps which I know will work. As an added measure I was also able to obtain some notes from Paul Whalen who setup the existing Koji Build System on Hong Kong and from Anthony Boccia who is working on a related project to migrate the existing Koji Build System to the Open RD system.
= Challenges Results =The result of this project was that I was successful in finding all of the correct steps to setup a complete Koji Build System and verify that those steps work. I was also able to gain a good understand of how all of the Koji components work together. This allowed me to add a good ammount of detail to the existing documentation and provide a better documentation for users who would like to setup their own Koji Build System in the future.
= Acknowledgments =
Chris Tyler